Provn of certain solar based street lights and provn of Solar heater Geysor for hot water system at RMS Dholpur

Amount

Excavation in trenches not exc 1.5 m in depth and not exc 1.5 m wide for taking out/laying HT/LT UG cable, Fibre Optic Cable and pole etc and getting out in soft disintigrated rock complete all specified/directed

Removing excavation soil at a distance not exc 50 m and deposited where directed complete all as specified and directed.

M&L for PCC (1:3:6) type B2 using 40mm graded stone aggregate as in foundation and mass filling concrete for HT/LT poles and transformers and in addition where ever Complete all as specified and directed.

M&L for PCC (1:2:4) type B2 using 40mm graded stone aggregate as in foundation and mass filling concrete for HT/LT poles and transformers and in addition where ever Complete all as specified and directed.

Supplying, errecting and fixing steel tubular swaged poles with cast iron base plate of size 300mm x 300mm x 6mm, finial taper plug, bolts, nuts & screws for type 410 SP-31 (9.0 metres long) including painting with two coats of aluminium paint over one coat of redoxide primer on all exposed surfaces and tarring with black bituminous paints to embedded portion in PCC and providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30 cm in between 2 bands and numbering of poles, in yellow paint over black painted back ground at a height of 2m from bottom of pole with 5 cm large bold letters 2" (inch) complete all as specified and directed. Note: Excavation, earth work, PCC in foundation and coping shall be measured and paid separately under relevant item of this schedule.

Supply, fixing and testing of Lithium based Energy Efficient Integrated solar street light of 50 watt in single FRP body with duly polyurethane coating(camouflage colour),encases with monocrystalline solar PV panel of 90-92 Wp ,lithium battery 11.1/12.8 v 44 AH with inbuilt BMS IP 65 high brightness W-LED (160/180 lm /watt) lamp with aluminium reflector for better light distrubtion CRI>70 colour temperature 5700-6500K . microcontroller basedcharge controller cum driver automatic diming function (frist four hour at full brightness and rest of the time at lower light level with PIR motion sensor dusk to dawn operation sutiable to working temperature -10 to 55 C .weight not more than 18-20 kg with adjustiable MS clamp sutiable for pole wall mounting with GI Pipe bracket 40mm dia (1.5 Mtr) with MS Clamp bracket as per site requirement etc complete as required, protection-short circuit overload reverse polarity and battery protection firm should provide vital parameter test report from NABL accredited lab and should be made in india with CE and ROHS complaint Make-Axxon-50W / HAVELLS/ PHILIPS/ CROMPTON GREAVES or as per Appx 'B'

Supply, installation, testing and commissioning of solar water heating system suitable for inlet water with chlorine and fluoride content up to 100 PPM and comprising of solar flat plate collector ,collector stand assembly, stainless steel insulated hot water storage tank with heat exchanger of 500 liters per day capacity with electric back up ,with collector "A" size aluminium box collector and comprising of following

Cover plate shall be toughened glass confirming to IS:12933(Part-1)-2003 with latest amendment, Collector box shall be made of aluminium sheet, Type , grade, size and finish of material used shall be as per IS:12933(Part-1)-2003 with latest amendment. Sheet for absorver shall be made of copper, Type, grade, size and finish of material used shall be as per IS: 12933(Part-1)-2003 with latest amendment. Absorber shall be made of copper, Type , grade, size and finish of material used shall be as per IS:12933(Part-1)-2003 with latest amendment. Collector box insulation shall confirm to Type , grade, size and finish of material used shall be as per IS:12933(Part-2, Section V)-2003 with latest amendment, Gaskets and gourmets shall confirm to IS-12933(Part-2, Section VI)-2003 with latest amendment shall be deemed to be included in unit rate quoted.

Insulated stainless steel Hot water storage tank non pressure type made of stainless steel grade 04 Cr 18 NI or 07 Cr 18 NI of IS 1570(Part 3)-1985, TIG welded of 200 liters capacity, nonmagnetic tank with stainless steel fittings with following specifications-1 No shall be deemed to be included in unit rate quoted.

stand for solar flat & hot water tank made with MS work to bear wind velocity upto 200 KM/Hr shall be deemed to be included in unit rate quoted.

Provisions of electrical back up with minimum 2X03 KW (06KW) heating element including providing Two No 20 Amps MCB 10 KA rupturing capacity in sub-main distribution board and providing electric connection in rigid non metallic PVC concealed conduit with 4 Sq mm single core, stranded aluminium conductor, PVC insulated wire from outlet of MCB to electrical back up with connected accessories-one job. The solar water heating system shall be provided on roof of single/double storey building. The electrical back up connection shall be tapped from sub main board provided at ground floor shall be deemed to be included in unit rate quoted.

Heat exchanger shall be cage type and make of stainless steel tube of grade 04 Cr18NI or 07 Cr18 NI of IS 1570(Part 5)-1985 shall be deemed to be included in unit rate quoted.

System internal piping from collector to hot water tank shall be ISI marked GI pipe medium class of IS:1239 duly insulated with nitral rubber 19mm thk and Al cladding of 0.5mm thk,shall be deemed to be included in unit rate quoted.

MC chanel 75x40mm for 3 mtr height from roof duly embaded in PCC ,top base made out of 65x65x6mm angle iron with flat 40x6mm thick stiffner-3nos and covered with welded wire mesh of 20mm dia width angle iron fram 25x25x3mm hole for all side and top and including rotational moulded polyethylene water storage tank of capacity 500 ltr.

Notes: The system shall be tested on completion to ensure that 200/500 (as specified) liters of water at 60 degree centigrade is available in hot water tank on a normal day in cold season.

General purpose overhead tank shall be provided at roof 3 M above roof level .

Normal water pipes and accessories from the normal water over head tank to inlet of plate collector shall be measured and paid for separately. Similarly Hot water pipes from hot water storage tank to bathroom/kitchen shall be measured and paid for separately.

Rate are inclusive of cold water tank with stand and hot water tank and solar plate collector with control valve and connected pipe and mounting stand accessories complete as directed

Makes: INTER SOLAR, GREEN LIFE, BHEL, M POWER GREEN ENERGY, TATA-BP SOLAR SYSTEMS, BEST AND CROMPTON(CHENNAI), NOVEL ENERGY(P) LTD, (NEW DELHI), SOLAR EQUIPMENT MANUFACTURING CO.(NOIDA), SOLCHROME SYSTEMS INDIA LTD(PARWANOO-HIMACHAL), SURYA JYOTI DEVICES INDIA LTD (ROPAR-PUNJAB)

Supply, installation, testing and commissioning of solar water heating system suitable for inlet water with chlorine and fluoride content up to 100 PPM and comprising of solar flat plate collector ,collector stand assembly, stainless steel insulated hot water storage tank with heat exchanger of 200 liters per day capacity with electric back up ,with collector "A" size aluminium box collector and comprising of following

Cover plate shall be toughened glass confirming to IS:12933(Part-1)-2003 with latest amendment, Collector box shall be made of aluminium sheet, Type , grade, size and finish of material used shall be as per IS:12933(Part-1)-2003 with latest amendment. Sheet for absorver shall be made of copper, Type, grade, size and finish of material used shall be as per IS: 12933(Part-1)-2003 with latest amendment. Absorber shall be made of copper, Type , grade, size and finish of material used shall be as per IS:12933(Part-1)-2003 with latest amendment. Collector box insulation shall confirm to Type , grade, size and finish of material used shall be as per IS:12933(Part-2, Section V)-2003 with latest amendment, Gaskets and gourmets shall confirm to IS-12933(Paret-2, Section VI)-2003 with latest amendment, shall be deemed to be included in unit rate quoted.

Insulated stainless steel Hot water storage tank non pressure type made of stainless steel grade 04 Cr 18 NI or 07 Cr 18 NI of IS 1570(Part 3)-1985, TIG welded of 200 liters capacity, nonmagnetic tank with stainless steel fittings with following specifications-1 No.

stand for solar flat & hot water tank made with MS work to bear wind velocity upto 200 KM/Hr shall be deemed to be included in unit rate quoted. .

Provisions of electrical back up with minimum 3 KW heating element including providing one no 20 Amps MCB 10 KA rupturing capacity in sub-main distribution board and providing electric connection in rigid non metallic PVC concealed conduit with 4 Sq mm single core, stranded aluminium conductor, PVC insulated wire from outlet of MCB to electrical back up with connected accessories-one job. The solar water heating system shall be provided on roof of single/double storey building. The electrical back up connection shall be tapped from sub main board provided at ground floor shall be deemed to be included in unit rate quoted.

Heat exchanger shall be cage type and make of stainless steel tube of grade 04 Cr18NI or 07 Cr18 NI of IS 1570(Part 5)-1985 shall be deemed to be included in unit rate quoted.

System internal piping from collector to hot water tank shall be ISI marked GI pipe medium class of IS:1239 duly insulated with nitral rubber 19mm thk and Al cladding of 0.5mm thk,shall be deemed to be included in unit rate quoted.

MC chanel 75x40x6mm for 3 mtr height from roof duly embaded in PCC ,top base made out of 65x65x6mm angle iron with flat 40x6mm thick stiffner-3nos and covered with welded wire mesh of 20mm width angle iron frame 25x25x3mm hole for all side and top and including rotational moulded polyethylene water storage tank of capacity 500 ltr.

Notes: The system shall be tested on completion to ensure that 200/500 (as specified) liters of water at 60 degree centigrade is available in hot water tank on a normal day in cold season.

General purpose overhead tank shall be provided at roof 3 M above roof level .

Normal water pipes and accessories from the normal water over head tank to inlet of plate collector shall be measured and paid for separately. Similarly Hot water pipes from hot water storage tank to bathroom/kitchen shall be measured and paid for separately.

Rate are inclusive of cold water tank with stand and hot water tank and solar plate collecter with control valve and connected pipe and mounting stand accessories complete as directed

Makes: GREEN LIFE, BHEL, M POWER GREEN ENERGY, TATA-BP SOLAR SYSTEMS, BEST AND CROMPTON(CHENNAI), NOVEL ENERGY(P) LTD, (NEW DELHI), SOLAR EQUIPMENT MANUFACTURING CO.(NOIDA), SOLCHROME SYSTEMS INDIA LTD(PARWANOO-HIMACHAL), SURYA JYOTI DEVICES INDIA LTD (ROPAR-PUNJAB)

S & F hot water pipe with and includingof 20 mm bore GI pipe medium grade insulated with Nitrel rubber tube 19mm thick with insulation and including glass wool ribben cementing with adhesiv/ wire mesh and Al cladding of 0.5mm thk complete all as specified and directed.

M&L pipe galvanized iron medium grade of 25mm bore complete with all fittings and fixed complete to walls ,and ceiling or laid in floors, jointed tested and commissioned complete all as specified and directed ISI marked.

M&L pipe galvanized iron medium grade of 20mm bore complete with all fittings and fixed complete to walls ,and ceiling or laid in floors, jointed tested and commissioned complete all as specified and directed ISI marked.

Returning, filling in including spreading, levelling, watering and well ramming in layers n. Exc 25 cm thick Complete all as specified and directed.

Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches Complete all as specified and directed. (Note :- Punning thickness shall be measured.)

M&L for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as directed.

Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable of size 16 Sqmm 2 core with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes or fixed on pole Complete all as specified and directed.

S & F Distribution board factory made and tested, made of sheet metal enclosure 4 way SPN with 200 Amp rated busbar 240 volts (double door type). powder coated suitable for mounting the MCB 240 volt Complete all as specified and directed.

S&F MCB 240 volts 10 KA, rupturing capacity fixed in DB's of the undermentioned type and rating. 20.01 MCB SP 240 volts 10-32 Amps

MCB SPN 240 volts, 40 Amps

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Complete all as specified and directed.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Complete all as specified and directed.

M & L for PCC work type B1 1:2:4 ( using 20mm graded stone aggregate) Complete all as specified and directed.

S & F Bib tap of 20mm bore long head fancy type with chromium plated cost copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc Complete all as specified and directed.

Welded steel wire fabrib supplied complete to wood or steel mambernot exc 4kg per square meter Complete all as specified and directed.

S&F MS frame work such as grills ,gratings etc with ends of bars shoulderd and /or forged into spike framed guard bars; barred iron doors ladders framed balusters walk ways railings frame work of water tank and similer work confirming to Fe.290.GDe-E-165 Complete all as specified and directed.

M & L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32x6mm by means of bolts, nuts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe medium grade 40mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion all as directed. Note :- The cost of funnel pipe of 20 mm GI light grade pipe and protection pipe of 40mm bore GI light grade is deemed to be included in quoted unit rate.

S S TRADERS

Vishal Traders

abhinav and company

RAAPS CONSTRUCTION

krishna Associate