CLEANING REPAIR TO SEWAGE LINE AND REPAIR TO FENCING STEEL GATE PATH DRAIN PLINTH PROTECTION AND OTHER MISC WORKS UNDER ZONE B AREA AT BB CANTT SRINAGAR

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and removing of demolished pipe to a distance exceeding 100 mtr and depositing where as directed, complete all as specified and directed.

Ditto all as per serial item No. 3.00 described here-in-before but 200mm bore.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for foundation, shafts, cesspits, manholes, pier holes, sewage line etc. not exc 10 Sqm on plan and getting out in any type of soil, complete all as specified and directed.

Ditto all as per serial item No. 5.00 described here-in-before but exc 1.5 mtr and n. exc 3.00 mtr in depth.

Demolition of cement concrete (un-reinforced) any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for plain cement concrete (1:3:6), type C2 (using 40mm graded crushed stone aggregates) as in foundations, filling in and mass concrete, complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.50 mtr above the starting point, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar (1:4), complete all as specified and directed.

M&L for walling of random rubble stone masonary, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 and pointed flush the surface in contact with earth in same mortor as the work proceeds including necessary weep holes at 2 metre c/c (staggered) as in retaining wall, complete all as specified and directed.

Ditto all as per serial item No. 12.00 described here-in-before but except stone.

M&L for plain cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregates) as in coping etc. including weathering, slightly rounded or chamfered angle and throating, including necessary used and waste of formwork complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, rendering is to be finished even and smooth (without using extra cement) using water proofing compound @ 3% by weight of cement, complete all as specified and directed. Note :- Water proofing compound shall be measured and paid separately under respective item.

Supply only integral water proofing compound and used as per manufacturer's instructions complete all as specified and directed.

S&F 200mm bore RCC (Reinforced cement concrete) pipes, Class NP-2 with collar, laid in trenches and jointed, complete all specified and directed .

Ditto all as per serial item No. 17.00 described here-in-before but 150mm bore.

M&L for cement concrete (1:3:6), type C2 (using 40mm graded crushed stone aggregates) as in concrete bed to drain pipes 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested, complete all as specified and directed.

Ditto all as per serial item No. 19.00 described here-in-before but 200mm bore.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in cover slab for manhole etc. including necessary use and waste of formwork, complete all as specified and directed .

M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M&L for mild steel round bars 10mm dia as in handle for manhole cover, Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290. Gde-E-165 complete all as specified and directed.

Cleaning of CI/ PVC pipe of any bore and size, laid in trenches including bends / junctions / gully traps etc. and removing of sludge, if any to a distance not exc 50 mtr from starting point and depositing, complete all as specified and directed

Ditto all as per serial item No. 25.00 described here-in-before but pipes fixed on wall, complete all as specified and directed.

Cleaning of manhole of any size, depth not exc 1.5 mtr including taking off manhole cover and refixing the same after cleaning, dewatering and disludging mechanically, removing the waste materials and sludge to a distance not exc 50 mtr and depositing where directed at site in borrow pits, complete all as specified and directed. Notes :- (a) The quoted rates shall included for earth work / excavation and removing of surplus soil to a distance not exceeding 50 metre.

Cleaning of manhole of any size, depth exc 1.5 mtr including taking off manhole cover and refixing the same after cleaning, dewatering and disludging by mechanically, removing the waste materials and sludge to a distance not exc 50 mtr and depositing where directed at site in borrow pits, complete all as specified and directed. Notes :- (a) The quoted rates shall included for earth work / excavation and removing of surplus soil to a distance not exceeding 50 metre.

Cleaning of drain pipes (SGSW / RCC / AC) of any size including manholes channels by mechanically from manhole to manhole for cleaning eye and well flushing with water after cleaning including taking off manhole cover and refixing the same after cleaning and removing waste material / sludge to a distance near by suitable distance and depositing in the borrow pits, complete all as specified and directed.

Cleaning of septic tank of capacity 25 users by desludging inlet chambers and removing the waste materials by mechanically with use of mechanical sunction machine (contaminated water and sludge/ solid waste) and sludge to a distance to near by suitable distance as cleaning measurements of quantity of contaminated water and solid waste/sludge in the percentage of 40% and 60%, complete all as specified and directed. Notes :- The quoted rates shall included for earth work / excavation and removal of surplus soil from pits to a distance not exc 50 metres.

Ditto all as per serial item No. 30.00 described here-in-before but septic tank of capacity above 25 and upto 75 users.

Cleaning of blockage of Indian or European type water closet including blockage of Nahani trap or floor trap or gully trap of any size type upto the Ist manhole (blockage of any type took place at IWC or EWC, blockages of kitchen trap, bathroom, wash hand basin trap due to stuck of any substance or material due to any other reasons to the entire satisfaction of users/ Occupants manually or with using pumping device or any other suitable method or mechanically and getting the signature of the User's on complaint slip for Zone 'B' area at BB Cantt Notes:- (a) Contractor shall deploy four numbers of Safaiwala's to carryout day to day complaints (Seven days of week Sunday/ holidays) of blockage etc and complaint slip shall be collected from the Complaint cell of AGE B/R-II. (Time of 04 x safaiwala-0900hrs to 1700hrs). (b) Contractor has to make sure that the blockage complaints so received shall be completed within the 24 hours from the time of receipt complanits, and for any delay in completion of the particular complaint a penalty @ Rs. One Hundread Fifty (Rs. 150/-) will be recovered from the contractor's dues per complaint.

Item No. 32.00 contd... (c) Contractor has to make sure that upon requirement by the sub-division, the contractor has to depute the same four or more Safaiwala's for cleaning of MES Honey sucker after use of the equipment at GE 864 MT area. (d) The Safaiwalas must have all requisite tools, safety equipments and winter protective clothing. (e) The payment shall be made to employees/ Safaiwalas on or before 7th day of every calander month. Payment to the employees shall be done by crossed cheque ECS / NEFT through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per Minimum Wages Act. (f) Contractor has to submit proof of payment and proof of EPF & ESIC subscription made by him alongwith RAR/ final bill. (g) Contractor shall quote the rates considering employees monthly leaves, releiver etc. as per labour law and nothing extra shall be paid on this account. (h) The rates quoted shall be inclusive of suitable reliever of manpower engaged by contractor separately in addition to 04 persons. (j) Portable pump for dewatering including fuel & Manpower also engaged where manually cleaning not Possible.

Item No. 32.00 contd... (k) Sewage cleaning rods, sefty Jacket Mask, helmet etc also be provided by the contractor to worker for working hours. (l) Cost of attendance register, printed work diary, material register/ security or entry passes and any other stationary reqd is to be born by the contractor and the rates quoted for the above are included in the quoted rates and no extra cost shall be claimed and entertained on this account. (m) Penalty :- In case of absence of Safaiwalla the penalty shall be imposed @ Rs 800.00 per person per day and the same shall be recovered from contractor's dues. (n) Being defence installation, the contractor shall ensure that antecedents of the personnel deployed are verified through concerned Police authorities before their deployment. The character and antecedent verification report of each employee deployed by the contractor should be submitted. (o) Contractor shall submit all documents before receipt of work order (Aadhar Card, Police verification and Bank Pass book Aadhar linked copy) of each worker intend to deploy on work.

M&L for preparation of newely or previously untreated steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newely plastered or unplastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

Dismantling of cast iron or reinforced concrete/ PVC pipes, jointed, any type, any size and taking out of trenches, if required complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Ditto all as per serial item No. 36.00 described here-in-before but fixed to walls.

Ditto all as per serial item No. 36.00 described here-in-before but 110 mm bore fixed to walls.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Ditto all as per serial item No. 39.00 described here-in-before but 110 mm bore.

Dismantling of trellis work (Jafri) two way, including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed.

S&F second class soft wood wrought, 35mm x 10mm laths (fixed straight or diagonally) in two way trellis work with 50mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plaster or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, rendering is to be finished even and smooth (without using extra cement) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including roof covering etc complete all as specified and directed

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for 25 mm thick cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in floors, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring/ hard standing complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work, complete all as specified and directed.

M&L for providing factory made precast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in road side kerb stone of size & shape as directed by Engineer-in-Charge including necessary use and waste of form work if required set in cement mortar (1:4) complete all as specified & as directed.

M&L for plain cement concrete (1:3:6) type C1, (using 20 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement n exc 2m in length and joints filled with mastic filling (1:1) complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floor and paving n.exc 15 cm thick below or above ground level (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for mild steel as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe 410 -W (Gde E- 250) quality A complete all as specified and directed

Dismantling fencing wire mesh, any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed Note : Actual weight of the fencing shall be ascertained by Board of Officers to be convened by GE.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of newely plastered or unplastered surfaces of walls and applying two coat of acrylic exterior emulsion paint over a coat of primer complete all as specified and directed

M&L for preparation of old plastered or unplastered wall surfaces by washing down , brooming down or steel wire brushing etc and applying a coat of cement base paint complete all as specified and directed.

M&L for walling of random rubble, uncoursed, brought upto courses, well bonded, bedded and solidaly hearted, built in CM (1:6) etc complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth in layers n exc 25cm, watering and removing surplus soil to a distance n. exc 50m and making good distrubed surface complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long with 5 to 10mm dia of neck complete all as specified and directed.

Racking out joints / pointing to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed.

M&L for keyed pointing in CM (1:4) keyed pointing to random or polygonal rubble, uncoursed or brought upto course masonry complete all as specified and directed.

ZAHOOR ENGINEERING WORKS

M/S SHAH CONSTRUCTION COMPANY

M/S DFA Enterprises