PWD/BWN/Rs.185.84 lacs/Special repair of Block AandB (5-Storyed), Connecting Passage and Ramp etc. in campus of Civil Hospital at Bhiwani in Bhiwani Distt.

Amount

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in Cement- HSR(8.5(b)+Note

Dismantling reinforced cement concrete with cleaning and straightening and cutting of bars if required- HSR(8.6(e)+Note

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the walls is not to be dismantlled HSR(8.18(a) Door

Scraping of Old cement plaster HSR(8.32©+Note 1st Level

2nd, 3rd & 4th level

5th level

Dismantling white or coloured glazed tiles (to be carefully removed) HSR(8.38) (1st level)

Scraping white wash and colour wash (HSR 8.32(a)

Dismantling cement conglemerate / terrazzo floors 25 mm to 50 mm thick including concrete base HSR(8.25) 1st level

2nd, 3rd & 4th level

5th level

Dismantling brick or flagged stone slab flooring including concrete base HSR(8.27 + Note)

Precast cement concrete 1:2:4 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey. HSR(10.77).

Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel-reinforcement but including centring and shuttering, laid in position complete in all respects. HSR(10.81+10.95(a)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in fascias parapets and other thin vertical sections, not covered by Item Nos. 10.82, 10.86 to 10.88 not exceeding 10 cm thickness excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects. HSR(10.89 + 10.95(a)

11.43 cm thick brick wall laid in cement sand mortar 1:4 in spuer-structure. [HSR 11.48 (a)+Note].

Supplying and filling cinder on roof (Ist storey) including light ramming. HSR(13.65) 2nd,3rd & 4th

5th level

Base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling. HSR(14.1+14.8 Note).

Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. HSR(14.4 + 14.8 Note). 2nd, 3rd & 4th level

5th level

25 mm thick grey polished flooring cement concrete 1:2:4 topping with 3 mm thick neat coat of cement rubbed and polished HSR(14.16+14.8 Note)

Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. (Note:- Reputed make Tile Only ISI marked will be used as approved by Engineer-in-charge). [HSR 14.45+Note].

Provding and fixing Ist quality ceramic glazed wall tiles confirming to I.S. 15622(thickness to be specified by the manufcturer) of approved make in all colours shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting risers of steps and dados over 23mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry,including pointing in white cement mxied with pigment to matching shades complete-300x450mm (14.92) (b)

Granite stone in all shades 15 mm to 18 mm thick in flooring, laid in any pattern as specified over base of 20 mm thick cement coarsed sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone comp. in all respect. (Excluding the cost of granite stone). (HSR 14.96) granite shall be supplied by the Deptt.

12 mm thick cement plaster 1:2 (HSR 15.3)

2nd storey. 3rd storey, 4th storey

5th level

20 mm thick cement plaster damp proof course 1:3 with 2 coats of bitumen at 1.65 kg per sqm laid hot and sanded-Horizental (15.77(b)+Note (Horizontal 2nd, 3rd & 4th level).

5th level

Vertical 2nd, 3rd & 4th

5th level

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, lock notch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete:door and window frame size 127 mm X 50 mm with 40 mm wide double rebate (18.34(c)-

Supplying and fixing glass panes including special metal sash putty of approved make glass panes 4 mm thick, exceeding 40 sq dm areas (18.30(b)

Fee-500 EQR TMT steel bars for RCC works, where not included in the complete rae of RCc including bending binding and placing in position complete (18.22)

Factory manufactured panelled door or glazed window, shutters of commercial hard wood,such as hollock, champ,chikrassy and chaplash,etc.,(non-coniferous timber other than teak,conforming to I.S.specification No.1003,kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks /cleats,stops,nails etc., complete,fixed in position (excluding the cost of any fittings,other than specified above,but including labour for fixing the same in position).35mm thick (170.90(b)

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash,etc.,(non-coniferous timber other teak,conforming to I.S.specification No.1003, kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail, and wire gauze of 140G or 120G designation including cost of iron hinges, screws,chocks/cleats,stops nail etc.,complete fixed in position (excluding the cost of any fitings,other than specified above,but including labour for fixing the same in position)-(style and rails of windows shutter shall be 75 mm wide) 35 mm thick (17.92(ii)

Factory manufactured solid flush door shutters, with block board core as per I.S.No.1659- 1969 bonded with water proof type phenol formaldehyde synthetic resin,hotpressesd, conforming to I.S.2202 part I and II, fixed in position,including iron hinges,screws, chocks/cleats and stops etc.(excluding the cost of any fittings other than specified above,but including labour for fixing the same in position)- (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges.)-35mm thick (17.93)(iii)

Cost of aluminium fittings complete for doors and windows, such as tower bolts, handles, etc., and screws for these fittings (excluding sliding bolt) (HSR 17.72)(a)for single leaf shutter

Double leaf shutter

Supplying and fixing hydraulic door closer I.S.I mark, with necessary screws etc. complete (b) I.S.I designation no. III (size of door 851 mm to 1000 mm) [HSR 17.82(C)].

PProviding and fixing Aluminum work for doors, windows, ventilators and partitions, Structural Glazing with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS;733 and IS;1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminum sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling C.P brass/stainless steel screws. All complete. Fixed portion (Anodized Aluminum transparent or dyed to required shade according shade according to IS;1868, minimum anodic coating of grade AC 15). [HSR 17.95)

Applying pink primer or aluminiumpriming ocat on wood work including preparation of surface, Knotting and stopping etc. HSR(16.2).

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade. HSR(16.3)

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding sundries etc. complete (JK/Bircle make( HSR 16.81)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces (HSR 16.25)

Painting two coats with ready-mixed emulsion paint in all shades for interior use on bricks, plaster, cement, fibre-board etc.(HSR 16.27)

Providing two coats of exterior acrylic emulsion paint (16.79)

Providing 4'-0" wide plinth protection with chequer tiles & Kerbs (NS)

PUBLIC HEALTH WORKS :- DISMANTLING LEAD CAULKED JOINTS OF CAST IRON SOCKETTED PIPES, VALVES AND SPECIALS BY HEATING THE JOINTS INCLUDING THE COST OF LABOUR,FUEL AND TOOLS, ETC. collecting the lead taken out from the joints and delivering the same to the divisional stores. 80 mm internal diameter of pipe, valves or specials. HSR(28.37)(C )

100mm internal diameter HSR(28.37(D )

Taking out Dismantled cast Iron Socketted or Flanged pipes valves and special ETC. out side form the trenches and stacing at a nearest convenient place as required the Engineer-in-charge from where they can be loaded into carts or trunks:-80mm internal diameter of pipe HSR(28.39(C )

100mm internal diameter HSR(28.39(d)

Dismantling disjointing, removal and carriage to stores, G.I. pipelines, specials, valves and fittings 20 mm internal diameter pipe line (HSR 28.48 (a) 15mm internal diametre

20mm internal diametre

40mm internal diametre

Providing & Fixing PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (Note:- Reputed make PVC Pipe such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. [HSR 13.89].

LABOUR FOR LAYING JOINTING, FIXING AND TESTING G.I./P.V.C./W.I.PIPE LINES AND SPECIALS tees bends, sockets elbows etc., INSIDE BUILDING and testing etc., complete including cutting threading. 15mm internal dia metre HSR(28.18(b(i)

20mm internal diametre HSR(28.18(b(ii)

40mm internal diametre HSR(28.18(b(v)

EXCAVATION, OF TRENCHES IN STREETS, LANES OR IN OPEN AREAS FOR STROM SEWER, SEWERS RUNNING BY GRAVITY AND MANHOLES TO FULL DEPTHS AS SHOWN IN DRAWINGS INCLUDING SHORING, TIMBERING OF POLING BOARDS,FRAME SYSTEM TYPE, dressing to correct sections and dimensions, according to templates and levels, dewatering, provision for diversion of traffic, cutting trees and bushes, etc. night signals, profiles, pegs, sight rails, boning roads, crossing over trenches for access to the houses, watching, fencing etc., fixing and maintenance of caution boards, refilling of trenches, watering of refill, in 15 cm layers, ramming and restoration of unmetalled or unpaved surface to original condition AND REMOVAL OF SURPLUS SOIL,FROM SITE OF WORK, UPTO A LEAD OF 1 KM IN ORDINARY SOIL for depths of excaution not exceeding 3 meters below ground level. HSR(6.10(a)

Cement Concrete 1:3:6 with stone aggregate 20mm nominal size in foundation and plinth. HSR(10.40). Ground foundation and plinth

1st to 5th level

Providing, Salt Glazed Stone ware Pipes Grade 'A' Instandard Length of 600mm each jointing and testing as described in HSR item No. 29.38, 29.39, 29.40 including the cost of Jointing material as well carriage loading & unloading stacking, handling, re-handling etc. complete in all respect to the satisfaction of Engineer-in-Charge. HSR(29.95( C) 200mm internal Dia.

CONSTRUCTION BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation cement concrete 1:2:4 BENCHING 12mm THICK CEMENT PLASTER 1:2 with a floating coat of 1mm thick of neat cement R.C.C.1:2:4 SLAB 100mm THICK /C.C.TOPPING 50 mm THICK WITH 455 MMx455MM/455MMx610MM INSIDE LIGHT DUTY C.I.INSPECTION CHAMBER COVER AND FRAME weight as per I.S.I. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design HSR(29.84(C )

EXTRA FOR EVERY 0.30 METER DEPTH OF INSPECTION CHAMBER 600mm X 900mm HSR(29.85(C )

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge). INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for sinking into floor, with raised foot treads COMPLETE WITH 100 MM G.C.I.’P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described in item no.30.1 above. size 580mm white HSR(30.2(a)

Providig and fixing in position best Indian make European type watercloser suite with concrealed 'P' or 'S' trap with or without vent (as approved by the Engineer-In-charge ) and all other necessary fitting as fully described in item no.30.3 (HSR 30.6 i)

Providing and fixing in position best Indian Make lavatory Suites (With Full Anti Splash RIM in Vitreous Chinaware and all other necessary fittings as fully described in item No. 30.41 above White HSR(30.42(a(ii)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with raw slugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. C.P. brass towel ring HSR(30.68€

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. INDIA MAKE 600mm X 450mm HSR(30.71(a(i)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the engineer-in-charge). Bib cock HSR(30.75 (C )

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineerin-charge) HS15 MM STOP COCK Concealed stop cock with flange HSR(30.76(a(ii)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION Aluminium 15 mm X 375 mm HSR(30.82(b(ii)

PROVIDING AND FIXINGIN POSITION H.C.I. FLOOR TRAPS I.S.I.MARKED OF THE SELF CLEANING DESIGN WITH C.P. BRASS HIGED GRATING WITH FRAME WITH OR WITHOUT VENT ARM AND INCLUDING CEMENT CONCRETE 1:2:4 under and around the floor trap where required upto floor level COMPLETE IN ALL RESPECTS INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS, ETC., minimum depth of water should be 150 mm with a minimum seal of 50 mm with 75 mm i/d outlet HSR(30.89(b)

Providing and fixixing PVC bend ISI marked 100mm dia PVC bend HSR(13.90(a)

Providing and fixing porch P.V.C. tee best India Make (NS) 100mm dia

80mm dia. (NS)

Bend 80mm dia (NS).

Supply of P.V.C. pipe 40mm dia (NS)

20mm internal dia metre (NS).

15mm dia metre (NS).

Provision for providing and fixing Union coupling in PVC pipe & Peat Valves. 20mm dia

40mm dia

Recovery Items :-The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Material obtained from dismantling of existing brick work, bituminous layer and granular layers have been calculated taking assumption that 80% of theoretical material will be retrieved. The dismantled material can used in any of the item for the work after modification (bringing it to required specifications) after approval from employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency but minimum price to be quoted is limited to reserve price as fixed and mentioned as under :- Teak wood chowkhat = 441.45 Cft. @ Rs. 500/- P.Cft.

Fresh door Shutter (Teak wood) = 7341.86 Sft. @ Rs. 50/- P.Sft.

80mm dia C.I. pipe = 18832.50 Kg. @ 18/- P.Kg.

100mm dia C.I. Pipe = 22753.50 Kg. @ Rs. 18.00 P.Kg. Note:- All quantities of the above material have been worked out on the basis of theorietical quantities laid on this road. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if material after dismantling is found on lesser side, no claim of agency on the score witll be entertained and full recovery on the basis fo quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minium rates to be used as base for quoting urchase rate by the agency. No. rates below the reserve price will be entiertained and resere rice will be considered for all purposes in case the agency quoted lesser that reserve price.

Krishan Kumar Kedia Contractor