Laying 80mmThick Inter Locking Paver Block road at Govindhapillai Cross Street Div-79. Unit-18 Zone 7

Providing laying, Spreading and compacting Graded Stone aggregates to Wet Mix macadam 250 mm thick specification including premixing the material with water at OMC in Mechanical Mix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base/basecourse on well prepared surface and compacting with vibratory roller to achieve the desired density, etc.,including cost of material,labour charges,rentls for machinery,fuel and all other incidental charges .Complete as per clause 406 of MoRT& H Specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)

Supplying and fixing Interlocking Blocks against available edgerestraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., 10 mmISS metal with minimum cement contentas applicable to M 40 grade concrete as per IS-456-2000, manufacturedby mechanical or hydraulic machine using VIBRO-COMPACTION Process and laid over 40 mmthicklaying course (bedding) RiverSand well compacted by plate Compactor with a joint width of 2 mm to5 mm including filling of all joints with.River sand and compacting thepaved surface with plate compactor two or three times until all the Unitto-Unit joints are completely filled with River sand and trimming theedges neatly including all labour charges and plate compactor chargesetc., complete. [Cost Inclusive of River Sand].

Supplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslab, rectangular beams,'TEE' or 'L' beams, lintels, bed blocks, staircase waists and landing slabs, landing beams ,canopy, etc.,with all cross bracings using mild steel sheets of a size 90x60cmx3.175mm and 10 gauge stiffended with welded mild steelangles of size 25x25x3mm for boarding laid over silver Oak(Country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 7.5cm centre to centre etc.,complete BDDATA-147

Providing And Laying Plain Cement Concrete Grade M15 (Nominal Mix) Using 20mm And Down Graded Iss Hard Broken Granite Metal Including Cost And Conveyance of All Materials To Site Including Costs of Crushed Stone Sand (M Sand), Cement And Labour Charges For Laying Compacting And Pumping Charges Curing And All Other Incidental Chrages Etc Complete In Accordance With Is 456 - 2954 (If pumping of Concrete is required).

Single Arrow Street Name board including Councillors Name Board Supplying and Fixing of Digitally Printed Retroreflective Single Arrow Sign board of size 1595mm x 900mm made of Type XI grade cube corner micro prismatic grade sheeting confirming to IRC 67-2012 as per ASTMD-4956-09 Specifications, Digitally Printed using Latex Printer for Traffic Colour logos/text and laminated with UV Resistant clear electro-cut film and applied to proper prepared sign substrate made of 4mm thick Aluminum Composite Material (ACM) with 0.25mm aluminium skin thick on both sides and back support frame angle of 25mm x 25mmx3mm Supported by 32NB, 2.7mm Thick Stainless steel pipe all round in 304 grade and 2 nos. of vertical posts of 65NB, 3.04mm thick stainless steel pipe of 304 grade firmly fixed to the found by means of properly designed foundation of size 300 mm x 300 mm x 450 mm with M15 Grade cement concrete and the item shall include earthwork excavation, cost of materials, loading, unloading, lead, lift, transportation etc, complete as per approved template. The signs shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufactured and supplied by the reflective sheeting manufacturer .Digitally printed traffic colour (red, blue, green, yellow, orange and brown) areas on white sheeting shall not be having less than 70 percent of the value of the coefficient of retro reflection established for its colour and type of sheeting as given in Table 6.9 of IRC 67- 2012.The coefficient of retro reflection after the stipulated warranty period shall be minimum 80 percent of the initial value of the printed sign (initial value shall be minimum 70% of the values given in table 6.9 of IRC 67-2012). Match component system warranty for the components like retro-reflective sheeting, overlay films and digital inks shall be provided by the manufacturer The Retro reflective sheeting shall be covered under 10 years warranty issued for field performance and certified copy of completed three years outdoor exposure report shall be obtained by the engineer-in-charge. The warranty shall be inclusive of digitally printed logos/text/legends and their bonding to the retro-reflective sheeting (as per MoRT&H Specification No.801). The latex printer used for digital printing should be used with Inks of low VOC emission and should have Greenguard, eco logo certificate as per UL 2801 Standards. The warranty & Test certificates shall be obtained from the retro-reflective sheeting manufacturer by the contractor and shall be submitted to engineer-in-charge.

Raising Or Lowering 45 cm.(or) 60 cm. Dia Cast Iron Man Hole Frames And Door Including Brick Work Second Class Table Boulded (Chamber Burnt) Brick of Size 9 X 4.3/8"X2.3/4" In cm. 1:3 With C.C 1:2:4 Using 20mm Irc Size B.G. Metal And Rendering Smooth The Top Surface With Cement Etc. Complete

Please Enable Macros to View BoQ information