Ritauli Augmentation of water supply scheme Providing Functional Household Tap connection and laying the balance pipe lines in village Under JJM Design Construction Testing and commissioning of 1MLD Capacity Water Treatment Plant Providing Function

Amount

Water treatment Plant Desinging , Testing , Commissioning of 1.00 MLD capacity including inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash, waste water tank including all civil works, pumping machinery and electric cabling, cantrol pannel, sets and electric control panel, DI pipes, entire piping network of suitable size, laying the DI pipe from Raw water pump to inlet box of WTP & Suction well for CW including DI specials, Suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed with automation complete in all respects as per NIT (Sluice valve of make IVC/ VAG )

Raw water Pumping Machinery Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame At water works

1200 LPM X 12 M. Head

Clear water Pumping Machinery Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame At water works

1200 LPM X 45 M. Head

Panel Board for Motors

Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing items.

For 2 Nos. Pumping Sets of 1200 LPM X 12 M Head A) Main switch 63 Amp 2 No. (L&T siemens, ABB). B) CT 100/3 = 2 No. (AE/KAPPA/L&T) C )Digital Multi function meter = 1No. D )SPP 1 No. of approved make E) Motor starter star delta for 1200 LPM x 12 m Head = 2Nos. (L&T, Siemens, ABB) F) VSS 1 No. & ASS 2 No. of approved make G)Capacitor KVAR as per site requirement = 2Nos H) Indicating Lamp = One Set 1) Change over Switch 200 Amp. = 1 No. (each) For Sr. No.2

For 2 Nos. Pumping Sets of 1200 LPM X 12 M Head A) Main switch 63 Amp 2 No. (L&T siemens, ABB). B) CT 100/3 = 2 No. (AE/KAPPA/L&T) C )Digital Multi function meter = 1No. D )SPP 1 No. of approved make E) Motor starter star delta for 1200 LPM x 12 m Head = 2Nos. (L&T, Siemens, ABB) F) VSS 1 No. & ASS 2 No. of approved make G)Capacitor KVAR as per site requirement = 2Nos H) Indicating Lamp = One Set 1) Change over Switch 200 Amp. = 1 No. (each) For Sr. No.2

Supply erection, testing & commissioning of IS marked copper, wire for various motors with underground system in PVC and fixible pipes copper wire 3 core complete in all respect respevts with accessories like thimble etc

100mm 2 3 Core

25mm 2 3 Core

Special for Pumping Machinery Supply erction fixing & testing of CI Double flanged pipe complete with all jointing materials 150mm i/d

Providing and fixing of 200 mm i/d floating arm/ floating drum fabricated with 16 guage GI sheet alongwith MS Bolt, CI flange welded with 1 side collor & 1 side wire mesh to prevent foreign elements from entering into the floating arm, fixed with swivel bend, CI base plate fixed with anchor bolts in tank hodi complete in all respect.

Design, supply & Erection of copper would, outdoor type Transformer of required KVA as mentioned below on load tap changer to suitable capacity on higher side of atandered make outdoor type, VCB Panel, G.O. Switch, H.T Metering Panels, APFC Panels for transformer, 11 KV Substation, entire cable network from G.O Switch to H.T. Metering equipement and from H.T Metering to Transformer Main to L.T Panel, Earthing safety equipement and any other contingent thereto complete in all respect as per DNIT and getting it passed from chief Electrical officer including operation & maintenance of 5 Years At W/W = 63 KVA

Providing and fixing in poisition GI elbow ISI marked complete in all respect 15mm i/d 564 X 4 = 2256

Providing and fixing in poisition GI Nipple ISI marked complete in all respect 15mm i/d 564 X 1 = 564

Providing and fixing in poisition GI Socket ISI marked complete in all respect 15mm i/d 564 X 1 = 564

Operation & Maintenance

Operation and maintenance for complete scope of work mention in the DNIT ( Disinfection material supplied by the PHED) as per Schedule-IV for a period 5 year after 12 month during defect liablity period 3 months trial run will be charged to the A/Mtc estimate

Defect liability period

Operation and maintenance during 1st year

Operation and maintenance during 2nd year

Operation and maintenance during 3rd year

Operation and maintenance during 4th year

Operation and maintenance during 5th year

Bidder Name

Amount

Kulbir Singh Contractor(GSTN-06ATZPS6352H1ZW)

Surinder Singh Hooda(GSTN-06AABPH9599L2Z1)

Surinder Singh Hooda

Surinder Singh Hooda