NIT6Item6

Removing of both Bar Screen which is hold on electric hoist at the height of approximate 6 metre from the ground level will be taken out by hydra to clear the site for making workable space from to put on safer side near the bar screen chamber.

Removing of all structure which is fixed in the under water structure will be removed by cutting with gas cutter etc. & taking out one by one with hydra to outside

The support of one end of I-Section beam at WJC RCC structure to strengthening the plateform with the help of grouting of MS Plate of 1” thick as required by job & also making proper support of plate with right angle plate is also required to proper support by providing proper support to hold the load of all I-Section Beam of size 450 mm x 140 mm.

Cost of Anchor bolt for fixing of MS Plate on RCC structure.

Making a RCC Pillar outside of WJC Channel by digging work at site and making complete RCC Foundation pillar for providing support etc. as per site requirement.

Fabrication with M.S. Frame triangular structure made from the U Channel of size 300x90 mm in triangle shape by fabrication with channel 8 mtr. – 4 Nos.x, 3.42 Mtr. -4 Nos., 5.06 Mtr. – 4 Nos., 2 Mtr. -4 Nos. etc. duly fabricated to make a complete structure for fixing of U Channel to support as guide of manual bar screen in flow of water in channel as per designated given by drawings attached.

Cleaning of complete bottom of channel by manual labour because in the inside water there is many obstructions in the bottom surface because both bar screen is not sitting in proper bottom side. The area will be clean by in all respects.

This complete structure fabricated as per triangular shape with proper support is to be fixed in under water structure with proper alignments. There is putting support of hydra outside the channel to pull in against the flow & one end against I-Section Beam & also making alignment with U channel in such way that this structure is to be welded in existing I-section beam of size 350x140. This process will be continuous upto complete structure fixed in all respect with in almost 8 points as required by the job. This continuous work will be doing in 2 to 3 days time as it is with holding of structure in straight position. After complete fixing of triangular structure frame in the under water by welding of complete structure in all respects with proper support so that the guide at channel of bar screen should not be disturbed during the operation & the operation of bar screen should not be disturbed during the operation process continuous.

Painting of both bar screen by manual labour & repainting both bar screen & other structure is required by job. After complete fixing of structure these both bar screen is put in the guide by hydra in other position one by one. Also operating on system in this operating level.

The bar screen which is lying outside of system lifting by hydra to outside that is to be repaired by welding & if any structure damage will be replaced by cutting of damage structure & welding in respect to movement free up & down ward.

The both side of bar screen which is lying outside duly repaired is to be fixed in U guide with the help of hydra in the proper guide with proper alignments etc. as required & making proper operation by electric hoist which is fixed in I-section beam in these alignments.

Testing & commissioning charges of complete job.

V.K. ENTERPRISES

KAMLESH ENGINEERING WORKS

Darshan Engineering Works