Maintenance of 440v OH line 3 Phase 5 wire system near sub station and feeding power to old staff colony under SDOCM

Amount

Erection of metallic pole of following length in cement concrete 1:3:6(1cement:3coarse sand: 6graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.Above 10.00 metre and upto 12.00 metre

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required. 6 span x 5 wire x 50 mtr x .214

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of1m above ground level and removal of rubbish upto a distance of50 m outside the periphery of the area cleared

Fresh jumpring

Transporting of pole

Gi wire 8 SWG + erection of GI wire No8 SWG including binding etc as required 4 span x 5 wire x 50 mtr x .103

Supplying and erection of 100mm X 65mm pin insulator complete with G. I. Spindle and nuts etc. as required.

Supplying and erection of galvanized 'D' iron clamps complete with shackle insulator(100mm X110mm),G.I.bolts, nuts and washers, coach screws etc. as required.

Erectionof cradle guard

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Supplying and erection of stay set complete (galvanized) with 19/ 20 mm dia X 1.8 meters long stay rod, anchor plate of size 45 cm X45cmX7.5mm,thimble,stayclamps,turnbuckle(20mmX60cm),7/4.00 mm dia G.I.stay wire and strain insulator etc incement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Dismentling and fitting of light top of the pole

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 12 Nos x 7.5sqm

Painting with aluminium paint of approved brand and manufacture to give an even shade .Two or more coats on new work

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per meter) cross arm for 2 wire overhead line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle iron/channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Total impact of GST for the purpose of CTC

M/s Sanjay Supplier

M/s Arvind Kumar Singh