Construction of Widening and Strengthening of Gadaura-Mishwaliya- Charbhariya-Kalnahi road (ODR) under Rajya Sadak Nidhi Yojna Year 2024-25 in District Mahrajganj (Ch 12-700 to 21-700) (With 5 Year Maintenance) Lot No 3/4

Amount

Scarifying the existing bituminous road surface to a depth of 20 mm and disposal of scarified material with in all lifts and lead upto 1000 metres. As per MoRT&H Specification & Clause No. 305.4.3, 3.15 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment section within all lifts and lead upto 1000m. As per MoRT&H Specification & Clause No. 301, 3.06 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. As per MoRT&H Specification & Clause No. 305, 3.17 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. As per MoRT&H Specification & Clause No. 305, 3.16 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. As per MoRT&H Specification & Clause No. 305, 3.16 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (For Cartage Earth)

Construction of granular sub-base by providing Close graded material, sperding in uniform layer with motor grader on prepared surface mixing by mix in place mathod with rotavator at OMC and compacting with vibratory power roller to achieve the desired density, As per MoRT&H Specification & Clause No. 401(B), 4.01 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable)

Providing, laying, spreading and compacting stone aggregates from approved quarry to Wet Mix macadam specification including premixing the material with water at OMC in machanical mix plant,, carriage of mixed material by tipper to site laying in uniform layer with paver in sub basae/base course on well prepared surface and compacting with vibratory roller to achieve the desired density As per MoRT&H Specification & Clause No. 406, 4.14 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable)

Providing, laying and spreading of graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed material by tipper to site. Laying with 1% OPC cement and 3.5% Hincole Emulsion in uniform single layer on sub base/subgrade and compacting with the road roller to achieve the desire density. As per MoRT&H Specification & Clause No. 406(A), 4.14 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable)

Providing and applying tack coat with bitumen (VG-10) grade using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom. (As per MORTH Specification.) As per MoRT&H Specification & Clause No. 503(i), 5.02 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & bitumen VG-10) (GST will be paid extra as applicable)

Providing and laying bituminous concrete with higher capacity batch type 120 TPH hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 percent (VG-30) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction. As per MoRT&H Specification & Clause No. 507B & 5.05, complete in all respect as per directions of Engineer in charge. (Including Labour Cess & bitumen VG-30) (GST will be paid extra as applicable)

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement OPC @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing (M-35 grade Using Batching Plant-120 cum capacity 21.19 C) As per MoRT&H Specification & Clause No. 602, 6.02 complete in all respect as per directions of Engineer in charge. (Including Labour Cess & Roylty) (GST will be paid extra as applicable)

Construction of sub-grade and erthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. As per MoRT&H Specification & Clause No. 305, 3.18 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) For Patri work.

Construction of sub-grade and erthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. As per MoRT&H Specification & Clause No. 305, 3.18 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) For Patri work (Cartage Earth)

Widening of R.C.C Culvert & Hume Pipe (NP-3) & RCC-U type (500x500mm) drain. Excavation of foundations in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling. Watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplush earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. As per PWD Specification & SOR S.I.No. 251. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (RCC U-Drain, Culvert 1x1.50, 1x2, 1x3 & HP Culvert)

Cement concrete with 4 cm gauge approved stone ballast approved coarse sand and cement in propertion of 8:4:1 including supply of all material labour and T&P etc. required for completion of the work. As per PWD Specification & SOR S.I.No. 281. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (RCC U-Drain, Culvert 1x1.50, 1x2, 1x3 & HP Culvert)

Class 150 Sub Class "A" brick work in 1:3 cement and Coarse sand mortar in foundation and plinth including supply of all materials labour and T&P etc. required for the proper completion of the work. As per PWD Specification &SOR S.I.No. 307. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Culvert 1x1.50, 1x2, 1x3 & HP Culvert)

M-20 Class R.C.C. work with cement, approved coarse sand 2.0 cm. gauge approved stone ballast in the proporton of 1:1.5:3 in slabs excluding the supply of reinforcement.....binding the same with 24 BWG, GI bending wire ......incluidng providing and fixing necessary centering and shuttering ..... As per PWD Specification & SOR S.I.No. 284A complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (RCC U-Drain, Culvert 1x1.50, 1x2 & 1x3)

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawing and technical specifications. As per PWD Specification & SOR S.I.No. 504 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (RCC U-Drain, Culvert 1x1.50, 1x2 & 1x3)

Cement concrete with 2 cm gauge approved stone ballast approved coarse sand and cement in propertion of 4:2:1 including supply of all material labour and T&P etc. required for completion of the work. As per As per PWD Specification & SOR S.I.No. 279 (I) complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (RCC U-Drain, Culvert 1x1.50, 1x2 & 1x3)

Providing, Laying & fixing of 600 mm dia Hume pipe NP-3 type. As per PWD Specification & S.I.No. 458-2003, 9 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (HP Culvert)

Providing, Laying & fixing of collar 600 mm dia. As per PWD Specification & S.I.No. 458-2003, 9 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (HP Culvert)

Struck Pointing with cement mortor consisting of one part cement and two part of fine sand of 1.25 FM on brick work including supply of all material, labour and T & P etc. required for for proper completion of the work. As per PWD Specification & SOR S.I.No. 574 complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) (Culvert 1x1.50, 1x2 & 1x3 & HP Culvert)

05 Year Maintenance work Maintenance Cost of 1st Year …………. 0% & 2nd Year …………. 0.25% (as per G.O. No/ 17/2024/SA0-113/23-1-2024-23-1099/113/2023 dated 16-01-2024)

Maintenance Cost of 3rd Year …………. 0.50% (as per G.O. No/ 17/2024/SA0-113/23-1-2024-23-1099/113/2023 dated 16-01-2024)

Maintenance Cost of 4th Year …………. 0.75% (as per G.O. No/ 17/2024/SA0-113/23-1-2024-23-1099/113/2023 dated 16-01-2024)

Maintenance Cost of 5th Year …………. 1.00% (as per G.O. No/ 17/2024/SA0-113/23-1-2024-23-1099/113/2023 dated 16-01-2024)

M/s Maa Sharda Nirman (BID ID -4893549)

SHAKUNTALA SINGH (BID ID -4896134)

M/S SATYA PRAKASH SHUKLA (BID ID -4896625)