Repairing of security barrack at NEEPCO VIP complex, Laitkor, Shillong.

Dismantling tile work in floors and roofs laid in cement mortar including stacking materials within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkats, architrave, holdfasts etc. complete and stacking within 50 metres lead: a) Of area 3 sqm and below

Providing vitrified Antiskid Tiles of approved quality size, shape not less than 8 mm on floor, skirting over a cement mortar bed 15 mm thick of 1:3 (1 cement: 3 coarse sand) complete at all level as specified and directed. a) Normal range

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (payment for grouting of joints to be made separately). a) Normal range

Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90x45 mm having single rebate of 32x15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. M.S. stay shall be providedat the bottom to steady the frame.

Providing and fixing to existing door frames. A) 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fir-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and sites, with wooden frame and suitable blocks of seasoned wood inside at equired places for fixing of fittings, cast monolithically with 5 mm thick FRP laminated for panels conforming to IS:14856, including fixing to frames.

Providing, fitting and fixing in position plywood partition walls with 6 mm thick plyboard with horizontal and vertical sal battens of size 50x80 mm spaced at not more than 1.20 m apart with necessary nails,wood screws, bolts,etc. complete as directed by the Department for all levels (Painting Varnishing to be measured and paid separately). a 6 mm thick Plyboard (i) On one face of the frames

Providing and fixing 25 mm thick shutters for cupboard etc: a) Panelled or panelled & glaazed shutters: (v) with 1st class Local wood including ISI marked anodised aluminium butt hinges with necessary screws. Pooma/Hollock/Gamari/ and the like

Providing and wood work in frames of doors, windows, clerestory window and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter & length. With 1st Class Local wood Pooma/ Hollock/ Gamari/ and the like

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. A) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws