Comprehensive Maint of SMQs of BR Works at Nandini Complex, PUshp Vihar Area, Pump House Area at AF Stn Bhisiana

Amount

Taking down cement plaster on brick or stone masonary Including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick Cement plaster in CM (1:4) on fair faces of brick work or concrete surfaces including applying two coat of cement base paint over and a coat of primer after preparation of new plastered surfaces.

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc including applying two coats oil bound distemper (OBD) over a coat of primer and after preparation of plastered surfaces complete all as specified and directed.

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc including applying three coats white wash and after preparation of plastered surfaces complete all as specified and directed.

M&L for 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling and finishing the surface even and smooth (without using extra cement) etc including applying three coats of white wash and after preparation of plastered surfaces complete all as specified and directed.

Complete removal of existing treatment, preparation of old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening complete.

Complete removal of existing treatment, preparation of old plastered or unplastered surfaces of walls applying two coats of cement base paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified.

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. including 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match copmplete.

M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x300x7mm thick including 10mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match complete.

M&L for Rectified coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified.

M&L for Rectified coloured ceramic tiles 7 to 8mm thick (square/ rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:3 to receive vertical tiles complete all as specified.

M&L for 12-15mm thick green marble slab flooring including 15mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab one side bullnosed including dismentling existing slab/stone etc complete.

M&L for 12-15mm thick green marble including 10mm thick cement plaster in CM 1:3 in riser of steps, skirting , dado and pillar with one side bullnosed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismantling of existing stone etc complete.

Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level) and removal of debries from MD land complete. Note : Demolition consider for item No 16 & 17.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base to paving complete all as specified and as directed.

M&L for Coloured Chequred cement concrete tiles 20cm x 20 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

Taking down Chowkhats or frames with shutter not exc 1.5 Sqm each (without taking off shutters from the frames).

M&L for Shutters of any description exc 1 sqm, but not exc 2 sqm each taking down and refix in same opening after easing and cutting in required length and width with necessary screwing and naling if required. all as specified as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing .

S&F Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and Drg.

S&F Butt hinges 100mm size extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F aluminium handle 100mm size cast type anodised complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of 150mm long extruded section and fixed complete all as specified and directed.

Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete.

S&F figured glass 4mm thick, pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete.

S&F as in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staple complete.

S&F 75mm bore( Sand Cast ) Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints , fixed to walls but as in repairs complete.

S&F 100 mm bore( Sand Cast) Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints , fixed to walls but as in repairs complete.

S&F 75 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door as in repairs complete.

S&F 100mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door as in repairs complete.

S&F 75 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door in repairs complete.

S&F 100 mm dia CI bends (any radius), diminishing pieces or tapers provided with access door in repairs complete.

S&F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) but as in repairs complete.

M&L for 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors including taking down and cleaning for removal to store etc complete all as specified.

M&L for 20 mm dia tubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and as directed.

S&F as in repairs 100 mm bore Traps 'P' or 'S' complete all as specified and diredted.

S&F in repair Vitreous china squatting pan , 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding complete.

S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including seat cover and connection to drain etc all as specified as directed.

S&F Flush pipe of Polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm fixed on existing brackets or stands including 32mm PVC waste pipe complete all as specified and as directed.

S&F 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe as fixed in repairs.

S&F 15 mm bore Stop Valve chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed in repairs complete.

S&F 15mm bore Stop valves, but fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm Complete.

S&F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete.

S&F in repairs 15mm dia Bib taps, Chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete.

S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union Complete.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or labo-ratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete.

Demolition of brick or stone boulder masnory, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and percast concrete articles complete.

M&L for Brick work with subclass 'B; bricks, staright or curved on plan exc 6.00 mtr mean redius, built in 1:6 cement mortar complete.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps, nut bolts including dismantling of old AC rain water pipe etc..

All as per item No 56 above but 75 mm bore PVC (SWR) pipes complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

All as per item No 58 above but 75 mm bore PVC (SWR) bends complete all as specified and as directed.

Dismantling water tanks exc 250 ltr and nexc 500 ltr and removing to store complete all as specified and directed.

S&F for Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs Gun metal gate valves 20mm dia with iron wheel head screwed both ends for iron pipe complete.

S&F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

M&L for Removing of bushes upto 10 cm dia trunk, grass from roof top, racking out joints/pointing to brick tiles laid flat and flush pointing with 1:3 cement mortar compound, all as specified as directed.

S&F in repairs MS curtain rod 20mm dia PVC coated with fixing brackets and ends cap (latoo) complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1, (20 mm graded aggregate) as in repair of chajjas, suspended slab etc, including demolition with wooden hammer and necessary formwork complete all as specified as directed by Engr-In-Charge.

Demolition of concrete above ground floor for sunken portion exc 15 cm thick and removing the rubbish out side MD land complete all as specified.

M&L for 15 mm thick rendering in cement mortar (1:4) as in sunken portion mixed with water proofing compound 3% by weight of cement, finishing surfaces even & smooth without using extra cement complete all as specified and as directed. Note :- water proofing compound shall be measured and paid seperately.

Supplying only integral water proofing compound, ISI marked complete all as specified and as directed.

M&L for bitumen blown any grade, applied hot, two coats to concrete surfaces at the rate of 1.5 Kg per Sqm per coat complete all as specified.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in filling of sunken and mass concrete complete all as specified and as directed.

M&L for 50mm dia GI spout pipe fixed in sunken floors by means of cutting holes in wall bedded in cement mortar and making good the disturbed portion of wall complete all as specified and directed.

M&L for cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good to facings where required and pointing in cement mortar 1:3 , cutting not exc 10 cm girth complete all as specified and directed.

M/s Kamal Builders

GUPTA AND ENGINEERS

M/s Vee Kay Associates

M/s Luxmi Constructions