SPL REPAIR OF INTERNAL ROAD AT NCC OTA GWALIOR

Amount

Scarifying or picking graveled macadam or bituminous macadam surfaces in area n exc 400 sqm each and depth exc. 50 mm but n. exc 100 mm complete all as specified and directed.

M&L for WBM of 75 mm thick (compacted thickness) with coarse aggregate (Limestone or sandstone) of grading 2 (90 to 40 mm size) spread, rolled and consolidated to gradient and camber required with power roller 8 to 12 Ton complete all as specified and directed.

M&L for preparing surfaces of un-surfaced WBM by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10, @ 10 kg per 10 sq metre complete all as specified and directed.

M&L for Premix bituminous macadam with using paving bitumen VG-30, as 4 % of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.

M&L for preparing old black top surfaces of road by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, applying evenly a priming/tack coat with using paving bitumen VG-10 @ 5 kg per 10 sq metre complete all as specified and directed.

M&L for providing bituminous premix asphaltic semi dense concrete (design mix) 30 mm consolidated thickness with 5.5% binder content by weight of total mix, with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed. Note : Filling of any pot holes (coming in the area to be re-carpeted) in the item not exc 30mm depth by material of premix asphaltic semi dense concrete is deemed to be included in the quoted rate.

Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, with using paving bitumen VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder (paving bitumen VG-30) @ 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm complete all as specified and directed.

M&L moorum /red bajri filling in floors or paving laid in layers n exc 15cm thick spread leveled and rammed including watering complete all as specified and directed.

M&L for one coat of Painting Lines, Dashes, arrows, letters etc. on roads, pavements and the like not exc 10 cm wide with road marking paint, white or golden yellow (retro reflective thermo plastic road marking paint 1.25 mm thick, uniform finish yellow / white in colour, applied by machine) ,all as specified and conforming to BS 3262-1989 including cleaning of surface completed all as specified and directed.

Demolition of brick work / stone work built in cement mortar including all quions, arches, pillars etc complete all as specified and directed

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping, kerb, haunching etc including necessary formwork complete all as specified and directed

M&L Providing precast cement concrete Type B-1 (1:2:4 20 mm graded aggregate) in win- dow or door cills, ntels,bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, Watherings, throat- ing etc. and setting in mortar complete all as secified and directed.

Demolition of concrete of any description and in position(reinforced cut to required as facilated) complete all as secified and directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed.

M&L for vitrified paver color tiles size 40 cmx40cmx9 to 10 mm thick, sizemoulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and directed.

S & F in repairs CAT eye solar reflected type of metal body allow of size 100 x100x20 mm with PAMA striplens reflector of modal no DA-972.0 fixed with and including MS studs of suitable size as per manufactures instructions etc completed all as specified and directed.

S&F in repairs Solar Delinator size 1000x 47mm is made of polycarbonate and toughned aluminium alloy body and height 145mm, dia 80mm comprises of 4 super bright LEDs whch give 360 degree veiwing including solar panel 2.5V, 120mm( approx) 1.25 V rechargable battary 1- Noincluding surface dressing and PCC 1:2:4 unsing 12.5 graded aggregate complete all as specified and directed.

Supply and Fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx 125mm x25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4 V/ 0.3 watt NI-ed recharchable battary ( 1.2V/ 1600ma) consisting of super bright LED with 10000 to 18000mcd completed as per manufatures instruction etc completed all as specified and directed.

M/s Bijender Singh

Akarsha Enterprises