Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹44.0 LAccepted-AOC | 1 | Accepted-AOC Lowest Bidder | |
| 2 | 2₹45.6 L+₹55,610 (1.24%)Rejected-Finance | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹45.9 L+₹94,455 (2.10%)Rejected-Finance C O GUPTA EMPORIUM AR BAZAR HAPPY VALLEY SHILLONG 793 004 | EAST KHASI HILLS | MEGHALAYA | 793004 | 3 | Rejected-Finance Not being lowest |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
11 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Shillong
HQ CWE Shillong, SE Falls, Shillong - 793011
ADDN/ALTN TO HQ CESZ OFFICE BLDG AT SE FALLS UNDER GE SHILLONG
2022_MES_563996_2
8618/SHL/E8
Open Tender
Civil Works
Item Rate
180 days
Shillong
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Shillong
₹84,000
Yes
7 Feb 2023
21 Dec 2022
12 Jan 2023
21 Dec 2022
11 Jan 2023
28 Dec 2022
Amount
Dismantling of plain or corrugated AC/ steel /fibre glass reinforced translucent sheeting any gauge thickness including neonatal or similar pattern roof covering complete all as specified and as directed
Dismantling of timber scantling 40 Sqcm over in section in any position (unframed work) complete all as specified and as directed.
Dismantling of timber scantling in fillet, rail, post, rafter, purlin etc under 40 sqcm in section unframed work ) complete all as specified and directed.
Taking down old PVC floor sheet any thickness and in any position including removing adhesive complete all as specified and directed.
Dismantling boarding any description fixed in any position complete all as specified and directed
Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slab/blankets, any thickness including cover fillets complete all as specified and directed.
Taking down chowkat with shutter (without taking off shutter from the frame) and area exceeding 1.5 sqm but not exceeding 4 sqm complete all as specified and directed.
All as per item No 7.00 above but not exceeding 1.5 sqm each complete all as specified and directed
Taking down shutter of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each complete all as specified and directed
All as per item No 9.00 above but not exceeding 1 Sqm each complete all as specified and directed.
Demolition of precast concrete block walling built in cement mortar complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed.
Supply and fix pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick as in roof covering of tensile Sqm strength 550 mpa including fixing with self-driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed.
Supply and fix pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick as in roof covering of tensile strength Sqm 550 mpa including fixing with self-driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed
Material and labour for second class hard wood in scantling clean sawn timber fixed complete all as specified and directed.
Material and labour for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote complete all as specified and directed.
Material and labour for 20 mm thick second class hard wood boarding in eaves board/fascia planed one side with butt joints fixed with nail complete all as specified and directed.
Material and labour for Anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channel 055 mm thick with Aluminium Sqm main-T flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each. Cross-T with flange 25 mm and web 25 mm fixed to main-T, Main-T is suspended from soffit @ 1200 mm c/c using GI wire of 4mm thickness aluminium frame will be 60 x 60 cm to receive ceiling board complete all as specified and as directed.
Material and labour for 4mm thick E board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /G/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed.
Material and labour for plain fillets square rectangular or triangular in section clean sawn secured with rails or brads (second class hard wood) sectional area exceeding 13 sqcm but not exceeding 25 sqcm complete all as specified and directed
Material and labour for second class hard wood plain fillets bullnosed, splayed, chamfered or rounded on one edge or face in section clean sawn fixed with screws sectional area exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified and directed.
Material and labour for 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work Plywood, grade BWP complete all as specified and directed.
Material and labour for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fared with approved adhesive as per manufacturer's instructions complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed
Material and labour for paving vitrified ceramic colour tiles (heavy duty tile) of size 300 mm x 300 mm x 10 mm thick as in path etc set and jointed Sqm in neat cement slurry and pointed in white or coloured cement to match with the colour of the ties over and including screed bed in cement sand mortar 1:4 complete all as specified and as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material and labour for 25 mm thick PCC 1:2:4 type B1 (20 mm graded stone aggregate) as in sub floor and similar wok complete all as specified and as directed
Material and labour for coloured Non-skid, joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 15mm thick screed bed in CM 1:4 complete all as specified and directed
Material and labour for Glazed ceramic coloured tiles in vertical surface of size 450 x 300 x 7mm/300x500x7mm thick set and jointed in neat Sqm cement slurry and pointed in white or colour cement to match with the tile colour over 10mm thick backing coat in CM 1:4 complete all as specified and directed
Material and labour for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each les not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed
Material and labour for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each ties not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and directed
Material and labour for precast cement concrete block masonry with solid block exceeding 10 Cm in width with PCC, type C1 (1:3:6) using 20mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed.
Material and labour for precast cement concrete block masonry with solid block 10 cm thick with PCC, type C1 (1:3:6, using 20mm graded stone aggregate) with plain or interlocking joints and setting in CM 1:4 complete all as specified and directed
Material and labour for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and fair without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately
Material and labour for rendering 10mm thick in CM (1:6) on fair faces of brick or concrete surfaces including finishing even & fair without using extra cement complete all as specified and directed
Supply only integral Water Proofing Compound (ISI Mark) as per manufacturer's instructions complete
Material and labour for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over a coat of 1 mm thick wall care putty complete all as specified and directed
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
Material and labour for providing precast cement concrete Type B-0 (1:2:4) using 12.5 mm graded stone aggregate, louvers and jallies, 50mm thick (measured solid), including all mouldings but excluding frame (Precast frame shall be measured separately and paid for under item 33.00 here-in-before) set in cement mortar 1:4 complete all as specified and directed.
Material and labour for providing precast cement concrete Type C1 (1:3:6), using 20mm graded stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated) with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 complete with joints to match complete all as specified and directed
Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in parapets, coping, benching, apper stone etc water trough Cum and the like including weathering slightly rounding or chamferred angle and throating etc including necessary formwork complete all as specified and directed
Supply and fix in repair PVC (SWR) bend, any radius, 110 mm bore complete all as specified and directed.
Supply and fix in repair PVC (SWR) Pipe single socketed in any length with rubber ring joints, 110 mm bore fixed to walls/floor complete as specified and directed.
Supply and fix in repair PVC(SWR) pipe 75mm dia single socketed in any length with rubber ring joints foxed to wall floor complete including clamps for securing pipe complete all as specified and directed
Supply and fix in repair PVC (SWR) vent cowl 75mm dia complete all as specified and as directed
Supply and fix in repair PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed.
Supply and fix in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed
Supply and fix in repair PVC (SWR) bend with access door of any radius 75mm bore complete all as specified and directed.
Supply and fix in repair PVC (SWR) reducer 75mm dia complete all as specified and as directed.
Supply and fix in repair PVC (SWR) 110mm dia PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed.
Supply and fix in repair 75mm dia PVC (SWR) floor trap including jointing to pipe complete all as specified and directed.
Supply and fix in repair brass body CP Tubular towel rail 20mm dia 450mm long complete all as specified and directed
Taking up or down steel tubing and connections for 15 mm bore of pipe complete all as specified and directed
Taking up or down steel tubing and connections for 20 mm bore of pipe complete all as specified and directed
Taking up or down steel tubing and connections for 25 mm bore of pipe complete all as specified and directed
Supply and fix GI steel tubing medium grade 25mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed
Supply and fix GI steel tubing medium grade 15mm bore with all fitting and foxed complete to wall and ceiling of laid under in floor complete all as specified and directed
Supply and fix GI tubes, medium grade galvanised, 20mm bore with all fitting and faxed complete to wall and ceiling or laid in floors complete all as specified and directed.
Re-fixing 15mm bore, old steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed
Re-fixing 20mm bore, old steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed
Material and labour for second class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
Material and labour for 30mm thick second class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-1 Section 8 clause 8.24(b) complete all as specified and directed.
Material and labour for 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed
Material and labour for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.
Material and labour for 3mm thick Figured glass, pin head type and glazing with wooden fillet in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.
Material and labour for pre laminated solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded PVC profile and edges will be painted to match with prelam sheet, PVC sheets are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided throughout the frame. The profile shall be mitre cut at two corners and joint by inserting 2 Nos of 150mm long brackets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing complete all as specified and directed
Material and labour for factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed
Supply and fix butt hinge, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and directed
Supply and fix butt hinge, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and directed.
Supply and fix extruded aluminium, anodised, handle of size 150mm complete all as specified and directed
Supply and fix extruded aluminium, anodised, handle of size 100mm complete all as specified and directed
Supply and fix aluminium anodised barrel bolt and fixed of 200 mm length complete all as specified and directed
Supply and fix aluminium anodised barrel bolt and fixed of 100 mm length complete all as specified and directed
Supply and fix mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm da with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 300mm complete all as specified and directed.
Supply and fix in repair vitreous china squatting pan, Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern complete all as specified and directed.
Supply and fix in repair wash basin vitreous china oval type white colour of size 510x430mm fixing on granite slab including cutting for and pining in ends of brackets, or erecting stand with foxing of CP waste coupling 32mm bore and waste pipe 32 mm x 800mm long complete all as specified and directed Note Rate for granite slab measured separately.
Supply and fix in repair bip tap, chromium plated, 15mm fancy type, complete all as specified and directed
Supply and fix in repair angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed
Supply and fix in repair PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supply and fix in repair vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe with grating and union for discharge pipe complete including providing and faxing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia complete all as specified and as directed
Supply and fix in urinal spreader of chromium plated any colour for fixing with 15 mm dia pipe complete all as specified and directed
Supply and fix in repair 15 mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, shank and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed
Supply and fix in repair urinal partition stabs 8/10mm toughened polish glass meets size 450x900mm terminating above floor line complete all as specified and directed
Supply and fix in repair Health faucet (ABS Body) Mild steel chromium plated suitable for 15mm dia pipe with 1 25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
Supply and fix in repair Hindware Flora S-220 (EWC) star white one piece closet, Size of 62x37x57cm complete including flushing cistern making good to floor fixing bolt complete all as specified and directed
Supply and fix in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed
Supply and fix in repair 75mm dia PVC (SWR) floor trap including jointing to pipe complete all as specified and directed
Supply and fix in repair for grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.
Supply and fix in repair 40 mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fitting on walls/ceiling or laying in floor complete all as specified and directed.
Supply and fix in repair soap dish, any type, faxed to plugs with chromium plated brass screws complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth and getting out in soft loose soil for foundation etc. complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25cm in soft loose soil complete all as specified and directed
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Demolition and breaking up drain pipes 150 mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
Supply and fix High density polyethylene pipes (HDPE 'B' grade) 160mm dia of pressure rating 6 kgf/cm2 laid in trenches etc complete all as specified and as directed.
Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate. Concrete bed to 160 mm drain pipe including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed
Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate smooth finished, and reforming benching as required for 160 mm internal dia of pipe complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Material and labour for precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs, shelves and similar articles set in CM (1.6) including necessary form work complete all as specified and directed.
Material and labour for TMT bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending Kg spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below above ground level) complete all as specified and directed
Material and labour for PCC (1:3.6) type C2 with 40mm graded stone aggregate as in foundation filling and mass concrete in foundation and similar work, complete all as specified and directed
Material and labour for 75mm thick PCC 1:3.6 type C2 using 40mm graded stone aggregate as in path, plinth protection, sub-floors etc finished even and fair or even and rough as required complete all as specified and directed
Material and labour for mild steel framed work as in grill, grating etc with end of bars shouldered and for riveted or forged into spikes, frame guard bars barred iron doors, ladders, frame balusters, walk ways, railing, post, struts, framed work of water tanks and similar works confirming to Fe 290 Gde E165 complete all as specified and directed
Supply and fix in repair Gun-metal, globe or gate valve 15mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and fix in repair Gun-metal, globe or gate valve 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed
Supply and fix in repair Gun-metal, globe or gate valve 25mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed
Dismantling water tank and removing to store tank of capacity 1000 ltr complete all as specified and directed.
Supply and fix rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000ltrs including 20mm dia PTMT ball valves complete all as specified and directed
Material and labour for complete removal of existing treatment of wall and applying two coats of Oil bond distemper over a coat of alkali resistant priming paint over a coat of 1 mm thick wall care putty complete all as specified and directed
Material and labour for preparation of old painted surfaces of wall/ceiling and applying one coat of synthetic enamel paint complete all as specified and directed
Material and labour for French polish, one coat over old wooden painted surfaces of any description over 10 Cm width or girth including necessary preparation of old surfaces with a coat of wood filler with two or more coats complete all as specified and as directed
Material and labour for complete removal of existing old treatment as in wall and applying two coats of cement base paint on wall including one coat of alkali-resistant primer on plastered surfaces complete all as specified and directed
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
Material and labour for preparation of new ceiling surface applying three coats of white wash complete all as specified and directed
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and directed.
Material and labour for 18 to 20 mm thick granite slab (as in table top rubbed and polished) as in counter fixed in CM 1:4, pointing in white cement 1:2 using granite dust with a mixture of pigment to match complete including dismantling the existing slab complete all as specified and directed
Supply and fix in powder coated anodized aluminium frame for door, window, ventilator, partition with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.
Supply and fix in powder coated, anodised aluminium window and ventilator shutters fixed type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws complete all as specified and directed.
Supply and fix in powder coating, anodised door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.
Supply and fix in powder coating anodised window and ventilator shutters side hung/sliding type without sash, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no) complete all as specified and directed.
Supply and fix sheet glass, 4mm thick ordinary quality, in squares, exceeding 0.50 Sqm in each pane including rubber packing and aluminium beading complete all as specified and directed
Supply and fix sheet glass, 5.50mm thick ordinary quality, in squares, exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed
Material and labour for 12mm thick pre-laminated particle board, interior grade pre-laminated both side with decorative choice laminations fixed with screw etc complete all as specified and directed.
Supply and fix in repair aluminium extruded section door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed complete all as specified and directed
Material and labour Venetian blind for windows 100mm wide slats made of fabrics, including head and bottom rail made up of powder coated anodised aluminium frame, water proof cord tilter, tape ladder, sliding hooks and pulley of any colour with all fixing arrangement complete all as specified and directed.
Material and Labour for Point wiring with two single core 1.5 sqmm (nominal area), FRLSH, ISI Per point 20 marked PVC Insulated unsheathed multi-stranded copper cable, 1100 volts grade including PVC Casing capping (medium grade) or concealed PVC conduit (medium grade) of suitable size with all fittings and accessories including PVC rectangular board of suitable size, and FRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one way switch including taking down of all point wiring with all accessories complete all as specified and directed
All as per Item No. 131.00 here-in-before but for one 2/3 pin socket outlet, 5 Amps on independent board complete all as specified and directed.
All as per Item No. 131.00 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multi-stranded copper cable of size 4.0 sqmm for one power point 3 pin 15 Amps on independent board including FRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
All as per Item No. 131.00 here-in-before but for one call bell point controlled by one push button switch complete all as specified and directed
Supply and fixing call bell ding dong, AC, 230 V Single pole ISI marked all as specified and directed
Supply and fix bell push, piano type. 6 A. single pole, 230 V. ISI marked all as specified and directed
Supply and fix Modular switch, one way, 6 Amps, one module complete all as specified and as directed
Supply and fix Modular switch, one way, 16 Amps, one module complete all as specified and as directed
Supply and fix Modular socket outlet, 6/ 16 Amps, 2/3 pin, two modules combined with modular plate complete all as specified and directed
Supply and fix Modular socket outlet, 6 Amps, pin, two modules combined with modular plate complete all as specified and directed.
Supply and fixing white cover plate with frame 3 module complete all as specified and directed
Supply and fixing white cover plate with frame & module complete all as specified and directed
Supply and fixing modular flush box/surface box 3 module complete all as specified and directed
Supply and fixing modular flush box/surface box 6 module complete all as specified and directed
Supply and fix in repair MCB Distribution board, 240 volts single pole and neutral double door, sheet steel, enclosure powder coated with 200 Amps rated bus bar with neutral link, 4 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix in repair MCB, SPN, 240 Volt. 32 Amps, 10 KA rupturing capacity 'C' series, AC complete all as specified and directed
Supply and fix in repair MCB SP, 240 Volt 6-32 Amps, 10 KA rupturing capacity 'C' series including taking down old one complete all as specified and directed.
Supply and fix LED luminaire 600mm x600 mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders and LED lamps suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
Supply and fix in repair table lamp hanging type dome shaped pendant with lamp with all accessories including necessary connection and taking down old unserviceable one complete all as specified and directed.
Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC RM insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multi-stranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC conduit of suitable size complete all as specified and directed, including taking down unserviceable one. (Note: Two runs of 6.0 sqmm cable, one run of earth wire of 6.0 sqmm and one run of PVC conduit shall be measured as one length) including taking out old one complete all as specified and directed.
M/S U.K ENTERPRISE
M/S UTTAM SAHA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .