Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹8.0 L+₹40,115.50 (5.25%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹8.3 L+₹63,378 (8.29%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹8.6 L+₹1.0 L (13.2%)Rejected-Finance M S RRK PROJECTS D 306 ADG P CHENNAI 11 3RD CROSS SIR MV LAYOUT VIDHYARANYAPURA POST BANGALORE 560097 | BENGALURU URBAN | KARNATAKA | 560097 | L4 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
10 Dec 2020, 6:00 pmClosed
GARRISON ENGINEER (SOUTH) BANGALORE
GARRISON ENGINEER (SOUTH) BANGALORE NO 1, ULSOOR ROAD BANGALORE-560 042
AS PER BOQ AND TENDER DOCUMENT
2020_MES_394824_1
GE(S)/B/8472/E8
Open Tender
Civil Works
Item Rate
180 days
BANGALORE
AS PER TENDER DOCUMENT
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER (SOUTH) BANGALORE
₹20,000
Yes
1 Apr 2021
12 Nov 2020
12 Dec 2020
12 Nov 2020
10 Dec 2020
28 Nov 2020
12 Nov 2020 - 18 Nov 2020
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/loose soil etc complete all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms thick in any type of soil etc complete.all as specified and as directed.
Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.
Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection,locally available best quality,deisgnation 75 all as specified and directed.
Supply and spread river sand to required width at bottom and top for cable cushioning all as specified and directed.(8cm before laying the cable and 15cm after laying the cable and punned into 18 cm thickness) Note: Punned thickness only shall be measured and paid.
M & L for cement concrete 1:4;8 type D2 (using 40mm graded stone aggregate) as in foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete etc all as specified and directed.
M & L for cement concrete 1:3;6 type C-2 (using 40mm graded stone aggregate) as in foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete etc all as specified and directed.
M & L for cement concrete 1:2;4 type B-2 (using 20mm graded stone aggregate) as in copings of poles etc including weathering,slightly rounded or chamfered angles and throating as directed including necessary formwork etc complete all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm x 2 core including taking down unserviceable UG cable complete all as specified and directed Note : excavation,sand cushioning,bricks laying shall be measured and paid seperately. (Make- Plaza/ Havells/ Finolex)
All as per Item No 9 stated here in before but of size 10 Sqmm x 4 Core etc complete all as specified and directed.
All as per Item No 9 stated here in before but of size 16 Sqmm x 4 Core etc complete all as specified and directed.
All as per Item No 9 stated here in before but of size 25 Sqmm x 3.5 Core etc complete all as specified and directed.
All as per Item No 9 stated here in before but of size 35 Sqmm x 3.5 Core etc complete all as specified and directed.
All as per Item No 9 stated here in before but of size 70 Sqmm x 3.5 Core etc complete all as specified and directed.
All as per Item No 9stated here in before but of size 95 Sqmm x 3.5 Core etc complete all as specified and directed.
All as per Item No 9 stated here in before but of size 120 Sqmm x 3.5 Core etc complete all as specified and directed.
S & lay in repairs galvanized Iron light grade pipe of 40mm dia including fittings for poles/wall including clamps,nut bolts etc or cable protection etc all as specified and directed
S & lay in repairs galvanized Iron medium grade pipe of 40mm dia including fittings etc for cable protection under road/floor/trenches etc all as specified and directed
Dismantling of old PCC poles of any size and removal from the site etc complete all as specified and directed.
S&F errect steel tubular poles 8.5m long, swan neck,complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 complete all as specified and directed.
M & L for LT straight through joint for under ground cable for 3 ½ / 4 Core upto 50 sqmm all as specified and directed.
M & L for LT straight through joint for under ground cable for 3 ½ Core upto 70 to 120 sqmm all as specified and directed.
S & F in repairs MCCB, 4 pole, 415 V, fixed type, 400 Amps with breaking capacity 36 KA connecting to existing panel board or enclosure etc including taking down old unserviceable MCCBs complete all as specified and as directed. Make: Indoasian cat No 830166 or equivalent as approved by GE in L&T, Schneider etc.
S & F in repairs MCCB, 4 pole, 415 V, fixed type,315 Amps with breaking capacity 36 KA connecting to existing panel board or enclosure etc complete all as specified and directed. Make: Indoasian cat No 830176 or equivalent as approved by GE in L&T, Schneider etc.
S & F in repairs MCCB, 4 pole, 415 V, fixed type, 200 Amps with breaking capacity 36 KA connecting to existing panel board or enclosure etc complete all as specified and directed. Make: Indoasian cat No 830116 or equivalent as approved by GE in L&T, Schneider etc.
S & F in repairs MCCB, 4 pole, 415 V, fixed type,160 Amps with breaking capacity 36 KA connecting to existing panel board or enclosure etc complete all as specified and directed. Make: Indoasian cat No 830115 or equivalent as approved by GE in L&T, Schneider etc.
S & F in repairs MCCB, 4 pole, 415 V, fixed type, 100 Amps with breaking capacity 36 KA connecting to existing panel board or enclosure etc complete all as specified and directed. Make: Indoasian cat No 830082 or equivalent as approved by GE in L&T, Schneider etc.
S&F in repairs fabrication, installation, connecting, commissioning and testing of Feeder piller box, outdoor type, factory made of overall dimension 50 x 40 x 30 cm made of 3.15 mm thick CRCA sheet ,FPB openeing on front side, floor mounted on angle iron 40X40X6 mm grouted 15 cm in ground & 30 cm above ground, powder coated suitably ventilated for 3 phase 4 wire 415 volts 50 Hz AC supply including high conductivity copper bus bar of 200 Amp rating mounted on insulator with the provision of one No. incoming and four Nos out going cables with necessary cable glands, cable lugs etc including provision of PCC foundation for fixing FPB box with PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) and taking out old rusted FPB complete all as specified and directed.
Supply and fix in repair LED street light fitting 45W, CCT 5700K with IP 66 protection suitable for operating voltage 100 to 265 V, alongwith active power factor correction electronic gear with over voltage, under voltage short circuit and open circuit protection, new generation energy saving & environment friendly long life versatile pressure die cast aluminum alloy housing with specially designed integral cooling fins, seperate LED and driver compartment roadway luminiare with high power LEDs as light source with specially designed lens optics confirming to and connecting up with suitable copper conductor complete all as specified and as directed. Make : Bajaj Cat part No ENXTP 45L WW CR PC SD or equivalent in Crompton LSTS45-CDL-M or Wipro LR02-501-XXX-57-G2
Supply and fix in repairs LED street light fitting 60W, CCT 5700K with IP 66 protection suitable for operating voltage 100 to 265 V, alongwith active power factor correction electronic gear with over voltage, under voltage short circuit and open circuit protection, new generation energy saving & environment friendly long life versatile pressure die cast aluminum alloy housing with specially designed integral cooling fins, seperate LED and driver compartment roadway luminiare with high power LEDs as light source with specially designed lens optics confirming to and connecting up with suitable copper conductor including taking down the existing conventional security light fittings complete all as specified and as directed. Make : Bajaj Cat part No ENXTP 60L WW CR PC SD or equivalent in Crompton LSTP-60-CDL-M or Wipro LR02-671-XXX-57-G2
RAMSON TRADERS
CITIZEN ELECTRICALS
RRK PROJECTS
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .