CONSTRUCTION OF MCC BUILDING SHREDDING UNIT AND STORAGE UNIT AT PERIYAR NAGAR KAGGUCHI

CONSTRUCTION OF 0.7 MT CAPACITY MICRO COMPOSITE CENTRE (MCC ) ,SHREADDING SHED AND STORAGE SHED AT PERIYAR NAGAR H/O KAGGUCHI

Earth work excavation for foundation in hard stiff clay sand slit full depth including all etc complete complying with standard specification

Providing Granular sub base using grade 1 materials of table 400-1 of morth with minimum CBR 30 spreading in un iform layer with mortor grader on prepared surface ,mix in by place method at OMC and compacting with vibratory roller

Supply and filling foundation basement with filling sand layer of not more than 15cm thick

Cement concrete 1:4:8 mix using 40mm gauge HBG metal for foundation including all etc complete complying with standard specification

Providing Granolithic floor finish pattern of 25mm thick with pcc 1:2:4 using 10 to 12mm thick including all etc complete

Supply and erecting steel centeringincluding necessary supports for plane surface for RCC work column pedestal plinth beam stairs including all etc complete

Reinforced cement concrete 1:1.5:3 using 20mm HBG jelly for all RCC work including all etc., complete complying with standar specification

Supplying fabricating and placing the position of mild steel for all reinforced cement concrete work including all etc., complete complying with standard specification

Brickwork in cement mortar 1:5 mix using country bricks ground of size 8 3/4 x 4 1/4 x2 3/4 including curing etc., complete complying with standard specification

Brickwork partitionwall cement mortar 1:5 mix using country bricks ground moulded of size 8 3/4 x 4 1/4 x2 3/4cm for the following including curing etc., complete complying with standard specification

Plastering with cement moetor 1:5 mix with 12mm thick in all floors including curing etc., complete complying with standard specification

Plastering with cement moetor 1:3 mix with 10mm thick in all floors including curing etc., complete complying with standard specification

Supply and fixing of PVC Solid door shutters toilet door using 19gauge 19mm MS sqaure tube for styles and outer frames .15mm MS sqaure tubes for top and bottum rails including all etc complete

Supply and fixing in position of aluminium anodised colour matt finish louvered ventilator the outer frame will be 62 x 38x 2 mm @ 1.17 kg /m and the louvers with moving arrangement

Supply and fixing of MS Grills withDoors and windows with one coat of red oxide with primer including all cost

Painting two coats withapproved cement paint over cement plaster wall surface ,ceiling and other new surface and including cleaning preparingthe surface and curing etc

paving the flooring with Antiskirt ceramic tiles of size 305x305x6mm including cost and conveyance of all materials to site

Daddoing wall with following best approved quality white or colour glazed tiles of following sizes in cement mortar 1:2 mix with10mm thick including all etc complete

Supply and fabricating erecting structural steel work for roofing welded or bolted type using MS channels ,Angles ,Plates and round bars etc

Fabricating supplying and fixing of pre painted galvanized iron sheet with the following specification The materials should be PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 gauge having width 1050 mm

Supply and fixing of RCC Rings (0.9 m dia ,0.3m hight )

Supply and fixing of RCC Precast Slab (0.9 m dia )

Supply and fixing in position indian Water Closet of size 580 x440mm white glazed earthen ware of approved quality

Supplying and layingand joining PVC pipes of approved quality and best vareity conforming ISS :2556 -part xii with sand cushion and forming flooring around 75 mm dia PVC Pipe

Supplying laying and joining GI pipe of approved quality best varaity B class Pipes and S[ecials including all etc completed

20mm GI pipe

20mm GI Coupling

20mm GI Elbow

20mm GI Steel Tap

Supplying and fixing UPVC Pipes and S[ecials including all etc completed

25mm UPVC pipe

25mm UPVC Connecter

25mm Dia UPVC Union

25mm Dia UPVC Coupling

25mm Dia UPVC Bend

Supplying and fixing in position best quality PVC specials etc complying with standard specfication

Supply and fixing in position best quality PVC soil /waste pipes (6KSC)of various sizes having ISI mark and providing leakage proof joint including all etc completed 110mm dia PVC 6KSC Pipe

Supply and delivery of 1000 lit capacity and fixing of HDPF tank as per IS 12701 /1996 including loading unloading transportation and labour charges

Wiring with 2x 1.5 sqm PVC Insulated single core unsheaded copper conductor cable of 1100 v Grade in suitable PVC Rigid pipe concealed in wall and ceiling with PVC accessories

Supply and run of 4 of 6 sqm insulated SC Unsheathed Copper conductor of 1100 V grade in suitable PVC Rigid pipe concealed in wall and ceiling with continuous earth wire connectionof 14 SWG TC wire and Making good of the concealed portion with suitable colour

Supply and fixing of single box type 4'36 W flu fitting complete with Electronic ballast and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 87

Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.SD 234

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for main SD

Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for Open PVC power plug point.SD 41

Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.SD 129

Supply and fixing of Plywood sheet with GI Sheet

manufacture and supply of shredder machine only for segregation garbage should have using Ms Plate20mm ,10mm ,3mm channel 75 8 40 l angles 40 8 60 & Shaft 60 mm dia capacity of 1 mt to 1.5 mt

Supply and fixing of sanitary napkin burning machine of size 600mm x600mm x900mm with MS legs whole system made up of mild stell materials with LED Display with temperature and time indicate PUF insulation,easy moving ash collecting tray ensure cleaness ,heater of high power of 3000 vW makes the temperature rise quickly

Supply, fixing and commissioning of Belt conveyor length of 6 mtrs and breath of 0.50 Metre wide for organic waste shorting and conveyor structure should made with M.S. Heavy Tubes, M.S. Channels with Gear Motor of 2HP / 50 rpm / 440V / chain drive motor rollers with heavy rollers: 2 Nos and shaft should be of ISI standard and Bearings, MOC - EN8 make should be of "HAVELLS' / MARATHON and the total setup should covered with FRP. The conveyor should be with branded starter, motor should be heavy duty performance, FRP Hopper with necessary safety guard facilities and all materials should be got approved by the corporation Engineers before fixing in position including cost of materials and labour charges etc. complete.

Provision for Supply and Fixing of Weld Mesh

Flying Insect Killer UV Tube Catcher Machine

Provision for Turbo AIR Vent for Shed-Roof

Provision for EB Service connection

Provision for Shredding Shed

Provision for Storage Shed

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information