UPGRADATION OF HARDSTANDING NEAR SARVATRA HALL AND PROVN OF PARKING SHED FOR JCOs/OR MD ACCN AT CME, PUNE

Amount

Dismantling stone slab laid bedded ;and pointed in cement mortar of any description or thickness in floor aprons etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm PCC 1:4:8 type D-2 as in sub base complete all as specified and directred

Supply only Fine aggregate (sand) for sand cousioning

M & L Machine pressed precast concrete interlocking pavour block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish colour shade complete all as specified and directed by Engr-in-Charge.

M&L precast solid block masonry of block 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:4 complete all as specified and directed.

M&L 15mm thick plastering on concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L Preparation of newly plastered or unplastered surfaces on wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L PCC 1:2:4 type B-1(Using 20mm graded crushed stone agg) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil etc complete all as specified

M&L for excavation in trenches in any type of soil , n exc 1.5 mwide and not exceeding 1.50 m depth for foundations etc. N. Exc 10 sqm on plan and getting out complete all as specified & directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/dense soil

M& L For Cement concrete 1:4:8, type D - 2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete etc. Complete as directed.

M & L For returning, filling in , including spreading, levelling watering and well ramming in layer not exc 25 cm in soil etc complete as directed.

M & L For removing excavated material n exc. 50 mtr and depositing where directed at a level n exc. 1.5 m above the starting point etc complete as directed.

M & L For hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface etc complete as directed.

M & L For Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and ammed including watering etc. complete all as specified and directed by Engr - in - charge

M&L for 75mm thick PCC type D-2 (1:4:8) using 40 mm graded aggregate as in sub base etc complete all as specified and directed

M&L for 60 mm thick machine pressed precast concrete interlocking paver block reflective type coloured any shape and size confirming to IS 15658-2006 of M-35 grade , with grey cement and pigment complete all as specified and directed.

M&L for girt cushioning below interlocking paver block incl spreading and levelling complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 , etc. Complete all as specified and as directed.

S & F For Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S &F For Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a of red oxide primer complete all as specified and directed

M & L For providing precast ce- ment concrete 1:2:4,type B-1 (using 20 mm graded stone agreggate )as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in cm 1:6 etc complete as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; ertical or to batter

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing

S&F 110 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

ShreHari Civil Enginneering and Contractors (BID ID -3359076)

vishalconstruction (BID ID -3350724)

Aakar Construction (BID ID -3351446)

Mukund Engineers and Contractors (BID ID -3359833)

Priyanka Power line (BID ID -3351760)

R K Construction (BID ID -3344881)

M/s DEVRATAN ENTERPRISES (BID ID -3344149)