Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.9 LAccepted-AOC | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹41.5 L+₹2.6 L (6.67%)Rejected-Finance | L2 | Rejected-Finance Rejected being 2nd Lowest Bidder | |
| 3 | L3₹42.6 L+₹3.7 L (9.47%)Rejected-Finance 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Rejected being 3rd Lowest Bidder | |
| 4 | L4₹45.2 L+₹6.2 L (16.0%)Rejected-Finance | L4 | Rejected-Finance Rejected being 4th Lowest Bidder | |
| 5 | L5₹46.0 L+₹7.1 L (18.1%)Rejected-Finance | L5 | Rejected-Finance Rejected being 5th Lowest Bidder |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
18 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Vinod Kumar AE (Civil) AGE BR II Offg GE(S) Bathin
GE(S)Bathinda
GE(S) BTD TOKEN NO 73 OF 2023-24 CERTAIN BR REPAIR TO BLDGS OF INSIDE THE DEPOT AREA OF FAD AREA OF AGE BR II UNDER GARRISON ENGINEER (SOUTH) BATHINDA AT BATHINDA MILITARY STATION
2023_MES_616071_1
GE(S)/BTD/TOKEN NO 73 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE(S)Bathinda
Class D
Category a(i)
10 documents required · 10 mandatory
₹500
GE(S)Bathinda
₹96,000
Yes
26 Oct 2023
28 Aug 2023
20 Sept 2023
28 Aug 2023
18 Sept 2023
11 Sept 2023
Amount
M&L for Rendering 15mm thick on fair faces of concrete surfaces (floor) in CM 1:4 to prepare surface of floor even and smooth and removal of existing linolium flooring of any description including roughening suracs of old conc. floor by picking, sweeping clean and washing down with water to remove dust.
S&F 3mm thick Linoleum, plain coloured, liad in floors including sealed down with an approved adhesive as per manufacturers instructions in floors including stretching, cutting and fitting complete all as specified and directed.
M&L for preparation old previously treated surface of steel and iron work any description over 10 cm width or girth and applying two coat of synthetic enamal paint on old steel surfaces of watch tower of appx 11.50 m height (watch tower made of angle/flat iron), complete all as specified and directed.
Dismantling of wooden plank, any description, fixed in any position with nails
S&F 30 mm thick hardwood 2nd class Planed one side, with butt joints and fixed with nails or nut and bolt in stages/plateforms to watch tower of height 11.50 m complete all as specified.
S&F for Pre- painted galvalume aluminum zinc coating (red/green colour) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified or nut and bolt to watch tower of height 11.50 m as specified complete all as specified.
Dismantling old asbestos cement, corrugated or semi-corrugated sheets in roof covering complete all as specified and as directed by Engineer-in-Charge.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified
S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified
M&L for Rolled mild steel as in roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings & heavy bracket frame (beam, tee, angle channel or flat section) in distance pieces, cleats etc confirming to Fe-410-W(grade-250, quality"A') including one shop coat of zinc chromate primer paint before fixing in position.
M&L for Rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410-S.
M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified
S&F in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified
Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:4 complete all as specified and as directed .
Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.
Material and labour Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, size of tile 600x 600x10mm thick,on 15mm thick screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
Description all as per Ser item No 17 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and as direcetd by the Engineer-in-Charge.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
Dismantling boarding, any description, fixed in any position with nails complete all as specified.
S&F anodized aluminium window glazed/gauged shutter/ventilators shutters/Partition fixed type w/o sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc in repair complete all as specified.directed by Engineer - in - Charge.
S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge.
S&F 100mm size moritice lock of brass, vertical type, 4 levers, complete all as directed.
Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed .
Supply and fixing in repair bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .
Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .
Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed .
S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and as directed.
S & F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings,brass,chromium plated with long screwed and fly- nuts,flange end bedded in red lead cement and other end fixed complete all as specified and directed .
Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.
Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed .
Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed .
Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.
S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.
S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.
Supply and fix in repairs; vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.
Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and as directed .
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.
S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed.
S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.
Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.
Supply only intergral water proofing compound complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and all as specified and directred.
Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.
Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.
M&L preparation of old distempered surfaces of walls by brooming down or steel wire brushing and applying one coat of oil bound distemper complete all as specified and directed.
M&L for preparation of old plaster surfaces of wall by brooming down or steel wire brushing or by using mechanical sander and applying two coat of Oil Bound distemper on walls by using roller / spray machine complete all as specified and directed.
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.
M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.
M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.
Dismantling existing broken unserviceable PVC tank of capacity 1000 Ltrs.
Supply and fixing in repair three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.
Dismantling existing broken unserviceable PVC tank of capacity 500 Ltrs.
Supply and fixing in repair three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.
Supply and fixing in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.
Supply and fixing ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed.
S&F tee Grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting consisting angle cleats of size 25mm wide 1.6m thick with flag fixed to RCC ceiling with door fasterner or wrapping the suspending wire around the existing wooden/steel/purlin/rafter for suspending grid frame work of size 605mm x 605mm c/c on main Tee and fixed to T-grid as per manufacturer's instructions. The section of main Tee 37mm x 24mm x 0.60mm and perimeter angle 24mm x 24mm x 0.50mm thick shall be fixed to wall with GI screws 40mm long and 450mm c/c along the perimeter of wall all as per manufacturer's instructions.
M&L 12mm thick perforted particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid, fixed in existing ceiling flat or sloping complete all as specified and directed
S&F Hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site etc incl 5mm thick PVC sheet in strips at the edges as per specifications complete all as specified and directed.
M & L for greasing and oiling for rolling shutter of any type and size to free moving / opening complete all as specified and directed.
Complete removing of old roof treatment from brick/concrete surfaces including removal of grass roots, hedges/plant roots complete all as specified and directed.
Cutting groves in brick wall 75 mm wide and 65mm deep and shaping horizontal face of groove and filled (after inserting of felt) in cement mortar 1:3 etc complete all as specifed and as directed by Engineer-in-Charge.
M&L screed bed or bedding layer of mortar 1:4 of 15mm thick as on roof surfaces parapet or vertical beam surface (horizental or vertical) of finish even and smooth witout using extra cement. Note using only course sand (Toka sand) in screed bed/plastering.
Preparation of Roof / wall concrete/plastered surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.40 Kg/Sam followed by APP modified five layer polymeric membrane 3mm thick, minimum wt 3.50 Kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/Sam) manufactured by M/S STP Ltd/IWL India Ltd or its equivalent, laid as per the manufacturers instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required complete all as specified and directed.
M&L for Hardcore of broken bricks gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed by Engr-in-charge..
M&L 25mm Sand filling under floors or in foundations including watering and consolidation
S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
RAKESH KUMAR GARG & CO.
M/s Kamal Builders
R K Enterprises
LM CONSTRUCTIONS
ADP Engineering
M/S BHAGWATI CONSTRUCTION COMPANY
BALAJI CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .