DCSE/CQD/QSC/GSS/21-22/NIT-08 dt.17.09.2021

Amount

General Abstract

PART A:

PART B: Miscellaneous Works

Description of Work / Item(s)

Amount

Part-A: (Lighting Fixtures, Poles & Cables) Post top fixtures with pole: Note: Aluminium Pole Specifications: 3 Meter, 2.5 mm thick(approx.) Aluminium Tubular Pole with inbuilt junction box & having following dimensions: 1.) Base of pole = 100 mm Outer Diameter & 0.5 Meter height tubular. 2.) Top of pole =60 mm Outer Diameter & 2.5 Meter height tubular. 3.) Base plate= Square shape (200mm x 200mm) with 6 nos. of holes for fasteners.

Supply, installation, testing & commissioning of 5000 Lumen, 4000 K Post Top Park Light with minimum efficacy of 100 lm/watt similar to Town glow post top of M/s Philips make (Model No.: “BGP300 LED50 757 PSU PC IN S1” ) along with designer post top aluminium pole of 3 mtr. height (As per Drawing) including fixing in ground on 1:2:4 PCC foundation (500 x 500 x 800 mm approx. in size) with 4 nos. of fabricated foundation bolts & necessary accesories , interconnection using weather proof 4-way terminal looping connector block fixed inside the pole structure, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. Note: Pole & Post top Light, both shall be obtained through same manufacturer so that no compatibility issues will be faced later on.

Supply, installation, testing & commissioning of 4500 lumen, 4000K Post Top Park Light with minimum efficacy of 100 lm/watt similar to Bounce Post Top LED Park light of M/s Lighting technology along with designer post top aluminium pole of 3 mtr. height (As per Drawing) including fixing in ground on 1:2:4 PCC (500 x 500 x 800 approx. mm in size) foundation with 4 nos. of fabricated foundation bolts & necessary accesories , interconnection using weather proof 4-way terminal looping connector block fixed inside the pole structure, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. Note: Pole & Post top Light, both shall be obtained through the same manufacturer so that no compatibility issues will be faced later on.

Rectangular Step Light (110x200 mm approx.): Supply, installation, testing & commissioning of minimum 390 lumen LED Step Light having efficacy of atleast 65 lumer per watt similar to 110 x 200 mm Recess Step light of M/s Lighting technology (Cat no. -S006CTR0Y0) complete with 4 nos. of holes for fixing in wall with necessary accesories , interconnection using terminal looping connector block, termination with suitable copper lugs etc. as required & as per tender specifications. Note: 1.) Scope of work includes concealement of step light by chiseling / cutting in wall/ column/slab, filling the leftover gaps , after placing the light, with cement, mortar , finishing by applying white cement etc. as per site conditions & as instructed by EIC. 2.) Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

Square Step Ligh (120x120mm approx.): Supply, installation, testing & commissioning of minimum 195 lumen LED Step Light having efficacy of atleast 65 lumer per watt similar to 120 x 120 mm Recess Step light of M/s Lighting technology (Cat no. -S003CTR0Y0) complete with 4 nos. of holes for fixing in wall with necessary accesories , interconnection using terminal looping connector block, termination with suitable copper lugs etc. as required & as per tender specifications. Note: 1.) Scope of work includes concealement of step light by chiseling / cutting in wall/ column/slab, filling the leftover gaps , after placing the light, with cement, mortar , finishing by applying white cement etc. as per site conditions & as instructed by EIC. 2.) Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

LED Bollard : Supply, installation, testing and commissioning of minimum 825 lumen LED Bollard lighting fixture having efficacy of atleast 55 lumen per watt similar to Cat no. P015CTBRX0 Primus R bollard LED landscape light of M/s Lighting Technologies including fixing in ground on 1:2:4 PCC foundation with necessary accesories, interconnection using terminal looping connector block, termination with suitable copper lugs etc. all as required and instructed by Engineer in Charge. Note: 1) The fixture to be got approved by department before manufacturing / supply. The fixtures shall have onsite replacement warranty of 1 year from date of completion of work . Warranty certificates shall be submitted to department. 2) Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

Outdoor Tube light fixture (2xT) : Supply, installation, testing & commissioning of tube light fixture with ready made IP65 2xT batten with holders suitable for LED tubes similar to model no.-TCW450 P 2XTLED 19W P3397 of M/s Philips make, complete with 2 nos. of T-8 LED tubes having minimum 2100 lumen output & atleast 100 Lum/watt efficacy including fixing with suitable GI screws, interconnection using terminal looping connector block, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. Note: 1.) The fixture to be got approved by department before manufacturing / supply. The fixtures shall have onsite replacement warranty of 1 year from date of completion of work . Warranty certificates shall be submitted to department. 2.) Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

Linear LED Wall Washer : Supply, installation, testing & commissioning of 4000 lumen, IP66 , Aluminium body Linear wall washer LED , having efficacy of atleast 100 lm/watt similar to model no.- GLSLNR40XW of M/s Star Light Artize make including fixing with suitable GI screws, interconnection using terminal looping connector block, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. Note: 1.) The fixture to be got approved by department before manufacturing / supply. The fixtures shall have onsite replacement warranty of 1 year from date of completion of work . Warranty certificates shall be submitted to department. 2.) Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

Spyke Light (18W) : Supply, installation, testing & commissioning of 2000 lumen, IP65 , Aluminium body , Flood Distribution LED spike light, having efficacy of atleast 125 lm/watt similar to model no.- GLSSPF18XW of M/s Star Light Artize make including fixing in ground with 1:2:4 PCC base (100x100x200mm approx.), interconnection using terminal looping connector block, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. Note: 1.) The fixture to be got approved by department before manufacturing / supply. The fixtures shall have onsite replacement warranty of 1 year from date of completion of work . Warranty certificates shall be submitted to department. 2.) Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

Spyke Light (7W) : Supply, installation, testing & commissioning of 7000 lumen, IP65 , Aluminium body , LED spike light having efficacy of atleast 100 lm/watt similar to model no.- G0388 of M/s Star Light Artize make including fixing in ground with 1:2:4 PCC base (100x100x200mm approx.), interconnection using terminal looping connector block, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. Note: 1.) The fixture to be got approved by department before manufacturing / supply. The fixtures shall have onsite replacement warranty of 1 year from date of completion of work . Warranty certificates shall be submitted to department. 2.) Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

Supply, installation, testing & commissioning of 1600Lm, IP 67 Neo LED flex of 12x12mm having 15W LED strip (3000K Warm White) having efficacy of atleast 105 lm/watt similar to model no.- GLSFLXN2X12XNEW of M/s Star Light Artize make fixed with fixing clamps at every 200mm, interconnection using terminal looping connector block, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. Note: Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

Supply, installation, testing & commissioning of 1600Lm, IP 67 Neo LED flex of 12x12mm having 15W LED strip (Blue colour) similar to model no.- GLSFLXN2X12XNEW of M/s Star Light Artize make fixed with fixing clamps at every 200mm, interconnection using terminal looping connector block, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. Note: Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

Supply, installation, testing & commissioning of 24V , 80W, IP 67 LED dimmable driver similar to model no. Optotronic OT 80/220-240/24 DIM P of M/s OSRAM make complete with 0 to 10 step dimmer.

LED Profile Light: Supply, installation, testing & commissioning of 5 mtr. , 24V, IP 66 LED strip light of having atleast 12W/Mtr. output complete with suitable driver similar to Digitech series of M/s Star Light Artize make with Linear Profile , interconnection using terminal looping connector block, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. Note: Scope of work also includes filling of hot silicon glue on all open sides of the connector for water proofing.

Flood Light: Supply, installation, testing & commissioning of Minimum 3500 lumen Flood light having efficacy of atleast 100 lm/watt similar to Transfomer II Single module ,5700K LED flood light (Ebony Black) of M/s Lighting technology (Cat no. - T0357FEYZ) completely fixed on existing MS bracket on pole/wall with necessary accesories , interconnection using weatherproof terminal looping connector block, termination with suitable copper lugs etc. as required & as per instruction of Engineer in charge. as required & as per tender specifications.

MS Pole : Fabrication, supply & installation of 7 mtr. bracket type high swaged ERW MS tubular pole (410SP-2) ,with pole top , as per IS 2713-1980 for pole with pipe material as per IS 1161 grade Yst-240 part II with MS base plate of 460mm x 460mm x 12 mm, 4 nos. of 150mm length MS webs made up of 5 mm thick MS plate shall be provided between pole & base plate, 2 nos. 10 mm dia. G.I. earthing studs welded to pole, 900mm long 5mm thick MS collar welded to the pole , the pole shall be hot dipped galvanized after fabrication of minimum 65 microns thickness, Pole shall be embedded 1500 mm below ground level in all types of soil/rock with 1:2:4 PCC on 150 mm thick 1000 mm square base concrete, upon that depth 1500 mm, 750 mm square base concrete upto ground level & 350 mm dia 300 mm high above ground level around the pole in level, plumb line & plaster finish, protected terminal box mounting arrangement shall be made on the pole 1500 mm above the ground level, Earthing of pole with 2 nos. of 8 SWG G.I. earth wires each 8 M long coiled below ground level complete with soldering and connection with poles. Scope also includes painting of pole with bituminous paint for embedded portion & upto 150mm above coping level from base plate of the pole, 2 nos. of 50mm dia. 2meter length HDPE pipe for entry of cable, pole numbering with paint etc. all as required & as instructed by E.I.C. Note: Excavation for making foundation for the pole will be measured against item no. -7 of Part-B.

MS Bracket : Fabrication , supply & installation of MS angle/Flat brackets of required size & shape with clamping arrangement made up of MS flat strips as required for installation of flood light on existing pole/wall/ column/beam with required hardware, including Hot dip galvanization of bracket & clamps all as required & instructed by E-I-C.

FRP Termination Box: Supply, installation, testing & commissioning of weatherproof FRP enclosure of size 600 x 420 x 200 mm of M/s ELM components make completely fixed on wall /column/ slab with necessary screws etc. as required & as instructed by EIC & having following equipments: i. 20-32A,4P,10kA,MCB- 1No. ii.4P,40A, NO power contractor similar to model no.4125 53 & 0.5A,D-curve ,SP,MCB for protection of contactor coil of M/s Legrand- 4 set. iii.20A-32A, DP, two-way with centre off changeover switch similar to model no.412430 of M/s Legrand-4 no. iv. 6-32A SP MCB - 12 Nos. v. Dual channel Timer (similar to model No. 4126 41 M/s Legrand)-2 no. vi. Din channel, earthing and neutral links etc.---1 set Note : a) Interconnection of power circuit shall be done with 6sq.mm FRLS flexible copper wires & heavy duty reducer type copper lugs etc. b) Danger board shall be provided.

FRP Junction Box: Supply and installation of weatherproof FRP enclosure of size 330 x 330 x 200 mm of M/s ELM components make completely fixed on wall /column/ slab with necessary screws etc. including making suitable holes for termination of HDPE pipe/ PVC conduit as required & as instructed by EIC.

CABLES: Supply, installation, testing & commissioning of 4 C x 10 sq. mm cable having following specs: 1. Grade : 1.1 KV 2. Conductor: Multi Stranded Aluminium as per Class-2 of IS: 8130 3. Insulation: XLPE (Cross linked polyethylene); Colours : Red, Yellow, Blue & Black 4. Inner sheath : Extruded PVC Type ST-2 as per IS: 5831 , Colour : Black 5. Aarmour : Single Layer of Galvanized Steel Flat Strip/Round wire 6. Outer sheath: Extruded PVC Type ST-2 as per IS: 5831 , Colour : Black Note: Excavation of earth for this item will be measured under item no. -7 of part-B

On wall/column/slab with 4-5mm thick hot dip G.I. flat/angle support as spacers fixed with coach screws/grouted in wall/anchor fasteners & 2mm. thick hot dip G.I. fabricated saddle with all fixing accessories, etc.

In existing Hume pipe/G.I. Pipe/HDPE pipe/trench /shaft/pit.

In ground at a depth of 900 mm below ground level including sand bedding, laying of baked bricks on side & top as per IS, reinstatement, back filling, dewatering, consolidation etc. all as per instructions of the E-I-C .

Supply, installation, testing & commissioning of 3 C x 1.5 sq. mm Flexible cable having following specs: 1. Grade : 1.1 KV 2. Conductor: Multi Stranded Copper as per Class-5 of IS: 8130 3. Insulation: PVC (Type-D); Colours : Red, Yellow, Blue & Black 4. Outer sheath: Extruded FRLS PVC Type ST-3 as per IS: 5831 , Colour : Black . Note: Excavation of earth for this item will be measured under item no. -7 of part-B

On wall/column/slab with 4-5mm thick hot dip G.I. flat/angle support as spacers fixed with coach screws/grouted in wall/anchor fasteners & 2mm. thick hot dip G.I. fabricated saddle with all fixing accessories, termination with suitable copper lugs etc.

In existing Hume pipe/G.I. Pipe/HDPE pipe/trench /shaft/pit , termination with suitable copper lugs etc.

Cable End Termination: End jointing of 4 C x 10 sq. mm aluminum conductor cable by crimping, with supply of all jointing materials like solder less heavy duty tinned copper lugs, long nipple cable gland, insulation tape, flux, duplicate earthing for cable gland with 8 SWG GI wires etc. all as per specifications and as per the instructions of E.I.C.

Description of Work / Item(s)

Amount

Part-B (Miscellaneous work) Hume pipe: Supply and installation of 150mm dia RCC hume pipe of non-pressure type along with collars, jointing of pipes with collar etc.as required & as directed by Engineer-in- charge.

HDPE pipe 50 mm: Supply & installation of 50mm dia. PE-63 & PN-6 HDPE pipe fixed on wall/columns/slab with 4-5 mm thick hot dip G.I. spacer with coach screws/ grouted in wall/anchor fasteners & 2 mm thick hot dip G.I. fabricated saddle with all fixing accessories OR in ground at a depth of 600 mm below ground level excluding excavation in all types of soils, including consolidating, temporary reinstatement, back filling, dewatering, all as required & as instructed by EIC. Note : Excavation for this item will be measured under item no.-7 of Part-B.

HDPE pipe 32mm: Supply & installation of 32 mm dia. PE-63 & PN-6 HDPE pipe fixed on wall/columns/slab with 4-5 mm thick hot dip G.I. spacer with coach screws/ grouted in wall/anchor fasteners & 2 mm thick hot dip G.I. fabricated saddle with all fixing accessories OR in ground at a depth of 600 mm below ground level excluding excavation in all types of soils, including consolidating, temporary reinstatement, back filling, dewatering, all as required & as instructed by EIC. Note : Excavation for this item will be measured under item no.-7 of Part-B.

Concealed HMS PVC conduit Supply, installation, testing and commissioning of 25mm dia. FRLS HMS PVC conduit in wall/column/slab/beam/ground, complete with necessary accessories like coupler, elbow, tee, bends, circular boxes etc. Note: Scope of work also includes chiseling & cutting in wall/ column/slab/ground, filling the leftover gaps with cement, mortar , finishing by applying white cement & necessary touch up painting etc. as per site conditions & as instructed by EIC.

Surface HMS PVC conduit Supply, installation, testing and commissioning of 25mm dia. FRLS HMS PVC conduit fixed on the surface of wall / slab / column / beam with 2 mm thick hot dip GI saddle & 4-5 mm thick hot dip GI Spacer (3 nos. per meter) complete with necessary accessories like coupler, elbow, tee, bends, circular boxes etc. all as per specification & as instructed by EIC.

PVC coated flexible steel Conduit Supply, installation, testing & commissioning of 25mm liquid tight, FRLS , PVC coated Flexible Galvanised Steel conduit made up of helical coil of self interlocked ribbed stripes of Galvanised steel complete with necessary accessories like coupler, elbow, tee, bends, circular boxes etc. fixed on the surface of wall / slab / column / beam with 2mm thick hot dip GI saddle & 4-5 mm thick hot dip GI Spaceras per specification & as instructed by EIC.

Excavation works:

Excavation in soft soil/murum including shorting or dewatering, removing of bricks/tiles etc.,disposing the excess earth within the radius of 3000 m, refilling, consolidation of surface etc. as required & as directed by Engineer-in- charge.

Cutting of asphalt road / concrete flooring /drain by using hydraulic drilling machine upto 200mm depth as required and stacking of rocks, refilling, consolidation of surface, making good to the original finish & Disposing the excess earth within the radius of 3000 m as required & as directed by Engineer-in- charge.

Removal of pevar block / shahbaz stone / existing drain wells & refixing as per original as required & as directed by Engineer-in-charge.

Earth Station: Providing earth station with heavy dipped GI earth plates electrode 600 x 600 x 6.0 mm in size at the depth minimum of 2.5 m below ground level (bottom of Plate) confirming to IS 3043 complete with all required materials like coke / charcoal, salt, G.I nut bolts, washers, 19 mm dia GI pipe (B class), 150 mm thick concrete wall chamber duly plastered having size of 500 x 500 x 500 mm, heavy duty (minimum 6 mm thick) M.S chequred plate cover, associated materials like 40 x 40 x 5 mm angle iron frame work, hinged locking arrangements, complete with funnels, GI test links (50 x 6 mm), two runs of 25 x 6mm G.I strips for connecting G.I plate & test link etc. including excavation of ground in all types of soils, refilling & removal of excess earth within a radius of 3000 m etc. all as required as per the drawings, specifications & instructed by Engineer-in-charge. Note:- 1. The chamber cover & frame shall be got approved by Department & painted with two coats of red oxide & one coat of enamel paint. 2. Painting of earth value & test date on cover plate. 3. All earthing stations in one building shall be interconnected to each other . 4. Earthing strips shall be welded with the earthing plate before galvanizing & two holes on each strip & plate shall be made for fixing the screws.

Earthing strips: Supply, installation, testing & commissioning of following sizes of heavy dipped GI strip fixed to wall / slab / column / beam with 2mm thick GI saddle & 4-5 mm thick GI Spacer or in ground at a depth of 750 mm below ground level including excavation in all type of soil , refilling and removal of excess earth within a radius of 3000 mtrs., temporary reinstatement and back filling of trench, interconnection of earth strips / wires with GI nut bolts & washers, painting with two coats of black bituminous compound for earth strip in ground and green colour enamel painting for strip on surface etc. all as required & instructed by the Engineer-in-charge.

In ground (25 x 6mm)

On wall / slab / column / beam (25 x 6mm)

Supply, installation, testing & commissioning of 4 swg hot dip GI earth wire complete with necessary lugs for earthing of play park equipments.

PRANIT PROCONCO

New Electricals

OM POWER SYSTEMS

Ramesh Electrical and Mechanical Works

PRANIT PROCONCO

New Electricals

OM POWER SYSTEMS

Ramesh Electrical and Mechanical Works

Suraj Enterprises

New Electricals

Ramesh Electrical and Mechanical Works

OM POWER SYSTEMS