Suppy and Installation of Submersible pumps in redeveloped Borewells at NCA-T Campus, Ghaziabad.

SITC of submersible pump motor set capable of discharging 14400 LPH of a head range of 59 mtr the pump shall be multistage of 5.0 HP / 3.7 KW totally enclosed submersible motor on common shaft suitable for operation on three phase 415 Volt 50Hz AC supply complete with all accessories etc as reqd. The pump shall consist mechanically balanced stainless steel shaft suction chamber provided perforated strainer etc complete with all other accessories. The electric motor winding shall have a non aging water proof insulation resistant to chemical effect having high strength motor pump shaft supported in water lubricated bronze plain bearing bushes with special self aligning shaft assembly end cap etc complete as required. (Model- UPFN 80 + UMA I/ 150 3/22 KSB or SS Make)

SITC of submersible pump motor set capable of discharging 24000 LPH of a head range of 59 mtr the pump shall be multistage of 10.0 HP / 7.5 KW totally enclosed submersible motor on common shaft suitable for operation on three phase 415 Volt 50Hz AC supply complete with all accessories etc as reqd. The pump shall consist mechanically balanced stainless steel shaft suction chamber provided perforated strainer etc complete with all other accessories. The electric motor winding shall have a non aging water proof insulation resistant to chemical effect having high strength motor pump shaft supported in water lubricated bronze plain bearing bushes with special self aligning shaft assembly end cap etc complete as required. (Model- UQD 212 + UMA 150 8/22 KSB or SS Make)

S/Fixing of 3 core 2.5 Sqmm submersible PVC insulated PVC sheathed flat copper conductor cable complete with connection at the starter & weather proof termination on the submersible motor complete as required. (ISI mark) (a) 3 Core 2.5 Sqmm

(b) 3 Core 4 Sqmm

Supplying and fixing of steel rope of 8 mm dia size with PVC sleeve with poxy jointing for protection from water complete etc. as required.

Supplying and fixing of M.S clamps made out of M.S flat size 50 x 6 mm and 18 inch long for firmly holding the submersible pump motor set i/c nut and bolts complete etc. as required.

Supply and Fixing of Three Phase Fully Automatic Star Delta Controller With Wideband Coil suitable for 10 HP/7.5 KW pump Horizontal Openwell Submersible Pump with with Range(9-11 Amp) i/c testing, commission complete as required. (Make L&T MU-G15 FASD)

Supply and Fixing of Three Phase DOL Controller With Wideband Coil suitable for 5 HP/3.7 KW pump Horizontal Openwell Submersible Pump with with Range(6-10 Amp) i/c testing, commission complete as required. (Make L&T MU-G10 DOL)

Replacement of existing 80 mm dia M.S Pipe bend complete i/c connection of existing pipe etc. as required. (For Borewell No.-9) (a) M.S Bend 80 mm dia

Supplying & Jointing of following size M.S. flange on both sides of existing G.I / M.S Pipe i/c welding, tightening with nut-bolts, washers, rubber gasket to make seal proof to avoid water leakage etc. complete as reqd.. (a) 50 mm

(b) 80 mm dia

Supply and Laying of following sizes 'B' class GI Pipe complete with connection etc. as required. (M/s TATA/ JINDAL/BST with ISI marked) (a) 50 mm dia

(b) 80 mm dia

c) 100 mm dia

S/Fixing of 80 mm Cast Iron Gate Valve i/c making connection threading, testing etc. complete as required.

S/Fixing of 80 mm Cast Iron Horizontal Lift Check Valve (NRV) i/c making connection threading, testing etc. complete as required.

Supplying of 4 Core X 16 sq. mm 1.1 KV LT armoured cable of multicore aluminum conductor, XLPE insulated, cores laid up, PVC inner sheathed, extruded PVC type ST2 outer sheathed, armoured with galvanised steel flat strip, conforming to IS: 7098 (Part-1)/1988 etc. as reqd.

Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 4 X 16 sq. mm

Pdg.& fixing 6 SWG GI wire on surface or in recess for loop earthing alongwith the existing surface/recessed / cable etc.as required.

Laying & fixing of one number PVC insulated and PVC sheathed/XLPE Alum. conductor cable of 1.1 KV grade of size not exceeding 35 Sq.mm. (a) direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

b) on wall surface as required.

c) In the existing RCC/ HUME/ METAL pipe as required.

SITC of following items in the existing Panel i/c minor modification in bus bar links/panel etc complete as required. a) LED type indications 240 Volt, AC

b) 96 mm x 96 mm Voltmeter, (0-500) V

c) 96 mm x 96 mm Digital Ammeter (M/s A.E./Rishabh/HPL make)

e) 100 Amp 3 pole MCCB with rotary operating mechanism having 25 KA braking capacity, (release range 32-40 Amp) [Make : M/s L&T Model No. DN0-100C]