REPAIRS TO ALUMINIUM DOORS WINDOWS PARTITIONS PVC WALL PANELING AND FALSE CEILING AT CERTAIN OTM ACCN UNDER AGE BR I AT INS SHIVAJI LONAVLA

Amount

Taking down chowkats or frames N.exc 1.5 Sqm with shutter (without taking of shutter from the frame).

Taking down chowkats or frames exc 1.5 and n. exc 4.00Sqm with shutter (without taking of shutter from the frame).

Taking down steel/aluminium windows/ventilator of any size with all fittings complete

Taking down Aluminium Partition of any size and description replacement/refixing in same opening after repair/replacement of unserviceable fittings such as,,Mdf Board,Glass,Glazing Patti, etc to make the existing Partition functional and making good disturbed surfaces all as directed by Engineer-in-charge

Repairs to aluminium doors of any size including taking down and fixing with necessary fittings of rubber, neoprene gaskets, loacking arrangements,Floor spring, corner tee, handles, hinges, glass and mdf bords,door stopper,etc including securing in same opening and filling up the gaps at junctions, i.e. at top, bottom and sides all as directed by by Engineer-in-charge

S&F powder coated Aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, 5mm th glass(Plain/frosted) and all necessary arrangements including frame for chowkate etc. complete all as specified by Engr-In-Charge.

M&L for powder coated aluminium three track and three shutter (of equal width) sliding type window without sash bars including necessary jointing clips, rubber packing, neoprene rubber gasket, aluminium snap beading, screws, aluminium fittings, handles, locking arrangement (star lock), bearings two No's for each shutter with 4.00mm thick sheet glass for glazing shutters & stainless steel wire cloth of 0.36mm nominal dia of wire & average width of aperture 1.40mm for wire gauge shutters including following powder coated sections as given in 'JINDAL' catalogue complete all as specified and as directed :- (i) Frame (Bottom)-20620. (ii) Frame (Top & Side)-20621. (iii) Shutter vertical (Handle lock)-20846. (iv) Shutter vertical (Int lock)-20845. (v) Shutter (Top)-20844. (vi) Shutter (Bottom)-20847. Note :- (i) The window opening shall be provided with three shutters of equal width. (ii) Two shutters shall be glazed shutters & one shutter shall be with stainless steel wire cloth all as specified hereinbefore. (iii) The shutters shall be placed in such a manner that at a time the entire width of window can be utilized as fully glazed window and at time the same can be utilized as partly glazed and partly gauzed window. (iv) The thickness of powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (v) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge

S&F in Repair Powder coated aluminium alloy curtain rod of any size including fancy type brakets all as directed by Engineer-in-charge

S&F 12mm thick toughned glass doors of any size and design with suitable stainless steel patch fittings, locking arrangement, floor springs and 02/04 Nos 300mm long matt finish handles (fancy type) including necessary acid washing/scratching and with complete all as specified and as directed.

S&F 12mm thick frosted toughned glass doors of any size and design with suitable stainless steel patch fittings, locking arrangement, floor springs and 02/04 Nos 300mm long matt finish handles (fancy type) including necessary acid washing/scratching and with complete all as specified and as directed by Engineer-in-charge.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Supply and fix aluminium powder coated fixed type ventilator without sash bar, centre to centre distance of horizontal members not exc 60 cm & vertical members not exc 45 cm with 4 mm thick plain sheet glass,rubber packing with & including following powder coated section as given in 'JINDAL' catalouge complete all as specified and as directed. (i) Frame (SP) -20052 (ii) Frame (DP) - 20051 (iii) Glazing clip - 19352

S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

S&F for 4 mm Sheet glass, ordinary quality and glazing as in Aluminiu windows, Doors, Ventilators etc in square/ rectangular shape n exc 0.5 sq.m in each pane including taking out and removal of old glass all as directed by Engineer-in-charge.

S&F for 5 mm Sheet glass, ordinary quality and glazing as in Aluminiu windows, Doors, Ventilators etc in square/ rectangular shape exc 0.5 sq.m in each pane including taking out and removal of old glass all as directed by Engineer-in-charge.

S&F in Repairs galvanised steel steel wire cloth, 0.63 nominal dia of wire and average width of aperture 1.18 mm and fixed to wooden skeleton shutter/ Aluminium windows all as directed by Engineer-in-charge.

S&F Aluminum powder coated partitions, partly panelled & partly glazed with 12 mm thick both side laminated MDF board in bottom panel and 5mm thick tinted glass in top panel fixed with clips,extra aluminium support, aluminium beads, rubber gaskets etc., centre to centre distance of vertical member shall n.exc 1mtr and horizontal members shall n.exc 1.10 mtr using following aluminum powder coated section as mentioned in Jindal Catalogue complete all as specified & as directed by Engineer-in-charge :- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352

S&F in repair Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old plastered surface of ceiling surface and applying two coats of white wash etc all as specified and directed by Engineer-in-charge.

M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement)

M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets/Aluminium snap grid

M&L for powder coated aluminium snap grid frame work for false ceiling, with aluminium angle 25mmx25mmx1.5mm fixed to perimeter of wall, Main 'T' runner 38mmx25mmx1.5mm and secondary/cross 'T' runner 25mmx25mmx1.5mm to be interlocked in such a way that the size of grid shall be 605mmx 605mm including 6mm dia GI hangers (upto 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40x3mm, 60mm long and expansion hold fastners 12.5mm dia, 40mm long, icluding romoving and refixing of existing fittings and fixtures complete all as specified and as directed by Engineer-in-charge. Note:- The thickness of the powder coating shall not be less than 0.5 micron & the tint shall be as decided by GE.

S&F 40mm thick Solid PVC Sandwich wall Paneling with 1mm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing inclduing removing old partuituion of any type any size

S&F in repairs 30mm thick plain perforated acoustic PVC False ceiling panel made of 5mm wall thickness PVC perforated sheet of size 600mm x 600mm on 25mm glasswool, 0.50mm (+- 0.25) plain perforated PVC Sheet of density 600 Kg/Cbm manufactured by an ISO-2015 certified company, is stuck with glasswool on one side with suitable adhesive. The panel is inserted in anodised aluminum or GI 'T' section of size 1"x1" (25mm x 25mm) in squar type grid of size 600mm x 600mm. The aluminium/GI framework is supported from the ceiling with the help of 'J' hook and G.I. wire/6mm m.s. rods of required sizes to maintain proper level . The aluminium/GI framework is supported on side wall with the help of aluminium /GI "L" section of size 1"x1" (25mm x 25mm) angles complete all as specified and directed. Note-: Rates are inclusive all scafoldings used for up to the height of 4 storeys.

S&F 4 mm thick Non Asbestos (E-board) designer tiles (Electra) suitably fixed in false ceiling grid /frame with staples or screws complete all as specified and as directed by Engineer-in-charge.

Peerzada And Sons (BID ID -3365860)

PREETI ENTERPRISES (BID ID -3366410)

M/s S.D Construction Co (BID ID -3366365)