CERTAIN REPAIRS TO COMPOUND WALL PCC HARDSTANDING AND FENCING AT CERTAIN PLACES UNDER AGE BR-I GE RANCHI

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for

Demolition of brick work built in cement mortar complete all as specified and directed.

Dismantling fencing wire mash any type

Dismantling posts/pillers or struts (Wood, Steel, or RCC) any section, including taking out embedded portion in natural ground and making good disturbed ground.

Excavating in post holes (or similar holes) each not exc 0.5 cu.m, getting out, retuning, filling in and ramming earth broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone as in foundation , filling and mass concrete complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone as in foundation , filling and mass concrete as in post holes, surface channels and drain etc complete all as specified and directed.

S&F TMT bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips complete all as specified and directed.

All as per item 9 but 6 mm dia and over upto and including 10 mm dia as in stirrups spacers and binders complete all as specified and directed.

M&L Re-inforced cement concrete (nominal mix) using Type B-1 1:2:4 ( 20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.

M&L Re-inforced cement concrete (nominal mix) using Type B1 1:2:4 ( 20mm graded aggregate) as in Columns, pillars, piers, posts and struts .

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions including fair finished surface complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 compelte all as specified and directed by EIC.

M&L half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed

M&L rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces and finishing surface even and smoth compelte all as specified in 1:4 CM complete all as specified and directed

M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished fair & even complete all as specified and directed..

M&L PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains.

M&L extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165

S&F Mild steel framed work as in posts and struts in fencing including cutting tops to shape as directed, drilled holes,notching for wire etcflats iron fillets (for securing wire mesh etc ) including all necessary drilling,bolting or fiveing etc, and similar work confirming to Fe-290 GdeE -165 all as specified and directed.

Supply only 4 mm dia galvanised iron chain link fencing of size as directed complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.

S&F mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagoanl or sqare nut, n.exc 5cm long of diameter of shanks 11 to 15 mm

S&F 2 strand barbed wire galvanised, 2.24mm dia barbed 2.00mm dia barbed at 75mm spacing and straing and fixing to any type of standared rails staining bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, stables or steel pins,etc., as directed

Preparation of new steel surfaces and two coat of synthetic enamel paint over a coat of red oxide primer.

M&L Cement concrete, type-D2, 1:4:8 using (40mm graded stone aggregate) 75 mm thick as in sub base of floors complete all as specified and directed

M&L machine pressed precast concrete inter locking paver block of any shape and size confirming to IS 15658-2006 of thickness 60mm, M-35 grade set and jointed with neat grey cement and pigment etc.

M & L 10mm thick rendering plastering in Cement Mortar 1:4 on fair faces of brick work or concrete surface to receive wall finishes.

M&L Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) us ing marble dust with admixture of pigment to match with shade of granite. complete all as directed

M& L for Sand filling under floors or in foundations etc incl watering and consolidation, all as speicified and directed.

M&L for providing chequered cement concrete tile 30cmx30cmx 25 mm thick set , jointed and pointed in neat cement slurry with grey cement and pigment over and including 20 mm thick screed bed in CM 1:6 in floor complete all as specified and directed

M&L cement concrete 1:2:4 type B-1 as in copings including weathering slightly rounded or chamfered angles and throating incl formwork.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons

M&L two coats of cement based paint over after preparation of new plastered surface.

M&L reinforced concrete pipes 150 mm dia bore, class NP-2, laid and jointed complete all as specified and directed..

M&L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth using extra cement

M&L 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete all as specified and directed.

M/S JAI MATA DEE CONTRUCTION CO.

india trading company

ISHAAN ENGINEERING

M/S ABDHESH CONSTRUCTION