COMPREHENSIVE MAINTENANCE INCLUDING JOINERY WALL FLOORING AND PERIODICAL SERVICES OF OTM AND MD ACCN AT MRC UNDER GE WELLINGTON

Amount

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Taking down Shutter of any description exceeding 1 sqm but not exceeding 2 sqm each all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per SSR all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as specified and directed.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

30mm thick glazed and skeleton, 2nd class hardwood shutter, divided into squares to receive glass, gauze (with sash bar) with plain chamfered or rounded, mitred and rebated sah bars, any numbers the size of member of shutter as specified in SSR Pt-I section 8 clause 8.24 (b) window and ventilaters shutters using second class hard wood and fitted to chowkat all as specified and as directed.

35mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

35mm thick second class HW plain, framed, panelled shutters (any No of panels) with veneered particle board medium density, 12mm thick complete all as specified and directed.

35 mm thick flush shutter,solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer with lipping/ frame on one faces, complete all as specified and as directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Mild steel hold fast conforming to Fe-290 Gde-165 all as specified and directed.

Preparation of surfaces of wood and tarring back of chowkat, area tarred exceeding 0.10 sqm but not exceeding 0.5 sqm each all as specified and as directed.

All as per item No.13 hereinbefore but treating small articles such as hold fast etc tarred area not exceeding 0.10 sqm each all as specified and as directed.

PCC type C1, 1:3:6 using 20mm graded stone aggregate over platform, bed blocks for hold fast, and like of any description, over 10mm in width or grith not otherwise described all as specified and directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long for door / window all as specified and directed.

Extruded aluminium alloy handles 100 mm size, Cast type, anodised complete all as specified and as directed.

Extruded aluminium alloy handles 150 mm size, Cast type, anodised complete all as specified and as directed.

Aluminium handles, Cast type anodised, extruded section 100 mm long including fixed in repairs all as specified and directed.

Aluminium handles, Cast type anodised, extruded section 150 mm long including fixed in repairs all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple and fixed in repairs all as specified and directed.

Sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and directed.

Dismantling boarding/ ceiling board of any description fixed in any position with nails complete all as specified and directed.

Kitchen and Cupboard Shutter / cabinet care case of required sizes made out of MDF Board 18 mm thick one side decorative lamination & other side Balancing lamination . The 18 mm thick board shutter / cabinet care case finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Note:- Work to be carried out by manufacturers authorised workers.

Shelf / Partition of Required sizes made out of MDF Board 18 mm thick one side decorative Lamination & other side Balancing lamination consisting of panel 18 mm thick board for supporting the hold of Shelf / Partition finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed. Note:- Work to be carried out by manufacturers authorised workers.

Stainless Steel Auto closing Hinges fixed to Cabinet Shutters complete as per Manufacturers specifications and all as specified and directed. Make : EBCO or Equivalent

100mm Stainless Steel handles rectangular shape polished bright complete all as specified and directed. Make : EBCO or Equivalent

18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.

12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination, and other side balancing white lamination fixed with screws to timber frame work all as specified and directed.

Extra over rates of block board or veneered particle board 18/19mm thick for external teak wood lipping, 6mm thick fixed with nail complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (when open) 40mm complete all as specified and directed.

Aluminium handles, anodised, fabricated type extruded section 75mm long all as specified and directed.

Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, and supply and fix glazing with putty or fixed with beads sheet glass 3mm thick ordinary quality and glazing with oil putty and beads in square not exceeding 0.5 sqm in each pane all as specified and as directed

Fancy type decorative drapery rod 20 mm dia Aluminium Powder Coated including side caps and brackets, as in repairs complete all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description not exceeding 1 sqm each all as specified and directed.

Resecuring or easying and adjusting without taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each all as specified and directed.

Double action floor spring hydraulically regulated made up of minium 1.25mm thick alluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other pars made up of mild steel heavy duty and fixed in repairs all as specified and directed.

Door closer hydraulically regulated, aluminium extruded section body designation No.1 universal type sutable for door shutters up to 700mm in width and of weight not more than 35Kg and fixed in repairs all as specified and directed.

Powder coated Anodised Aluminium frame for doors windows, ventilators, U channels, safety grill with one or more rebats including jointing cleat for fixing, complete all as specified and directed

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate, 25mm thick as in floor all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes, complete all as specified and directed.

Vitrified Ceramic tile 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over all as specified and as directed.

Vitrified Ceramic Tiles 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.36 sqm as in skirting/ dadoo etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

PCC 1:5:10 type E2 with 40mm graded stone aggregate with lime mortar 1:3 filling in sunken portion all as specified and directed.

Supply and fixing in repairs 40mm bore low density polythylene (LDPE) pipes of pressure rating 6Kg/sqcm as in wash basin/kitchen sink and similar works like sprout outlet etc., complete all as specified and as directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning the surface and APP based polymeric membrane weighing minimum 3Kg/sqm and minimum 300 thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed.

Coloured Non Skid ceramic tiles 7 to 8mm thick ( Square/Rectangular) area of each tile not exceeding 0.36 Sqm as in floors etc., and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM 1:4 including spacers with epoxy grouting complete all as specified and as directed. Note: Tile to be fixed using spacers 2mm duly grouted with adhesive as per manufacturers instructions.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 300x600x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:4 on fair face of brick or concrete surface complete all as specified and as directed. Note: Tile to be fixed using spacers 2mm duly grouted with adhesive as per manufacturers instructions.

Supply and Fix UPVC ventilator frame, made of extruded UPVC section having overall dimensions of 100x62x50mm having wall thickness 2mm+- 0.2mm, PVC material confirming to IS-10151, corners of wall frame shall be joined by MS galvanised brackets joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm +/- 0.1mm and the tie rod shall be provide at the bottom of the frame. The ventilator system should be inclusive of glazing with 5.5mm thick glass of size as required in ventilatior frame (louvered type) as per manufacturer instructions including all fittings and necessary locking arrangements complete all as specified and directed.

Factory made UPVC white colour sliding window three track, area not exceeding 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (± 0.2mm) window profile with hollow section with multi chamber frame (88mm x 85mm) sliding sash (42mm x 67mm) sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm) Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket, 1.2 (± 0.2mm) thick galvanised steel frame (30mm x 18mm) 2 Nos sliding sash (30mm x 18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware (Touch Lock of zinc alloyed (white powder coated) steel roller system inclusive of stainless stell wire cloth 0.36mm nominal dia of wire and average width of aperture 140mm and required accessories all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.

All as per item No 58 hereinbefore but area exceeding 2.00 Sqm each all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Taking down GI tubing 15mm bore medium grade and connections, all as specified and directed.

Taking down GI tubing 20mm bore medium grade and connections, complete all as specified and directed.

Supply, laying and testing steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified of size 15 mm bore.

Supply, laying and testing steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified of size 20 mm bore.

Vitreous China wash down water closet pan (pedestal pattern), white with P or S trap including flushing pipe, seat and PVC seat cover (white), closed pattern with flat bottom and cover brass chromium plated hinging device, including connection to drain and to flushing pipe, antisyhonage pipe etc and fixed in repairs all as specified and as directed

PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed in repairs complete all as specified and directed.

Vitreous China Urinal, Half stall type,white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including flush pipe, grating and union for discharge pipe, and fixed in repairs complete all as specified and directed

Pillar tap, 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs all as specified and directed.

Long body bib tap fancy type Chormium plated fixed to 15mm dia in repairs,complete all as specified and as directed. Make :- Cat No. CON-107KN of Jaquar or equivalent

Stop valves 15mm fancy type, chromium plated with long shank and cup concealed type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed

Chroumium plated fancy type 2in1 bib tap fixed with existing pipe including fixed in repair all as speicified and as directed Make : Cat No. KUP- 35041PM of Jaquar or equivalent

Stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated ,15mm bore including fixed in repair all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Over head shower rose 200 mm X 200 mm square shape single flow with shower arm square 450 mm long and fixed in repairs complete all as specified and as directed.

Health faucet with 8mm dia, 1m long flexible tube and wall hook with back flow preventer complete fixed in repairs all as specified and directed.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long and fixed in repairs all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed.

Rendering 15mm thick over concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement on stone wall /PCC Block / Brick work and above chajjas all as specified and as directed.

Rendering 10mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces including water proofing liquid finished even and smooth without using extra cement all as specified and directed

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and directed

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distember washable over a coat of primer complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of Exterior Emulsion paint (Anti Fungal) white or tinted over a coat of primer as approved by GE complete all as specified and directed.

Complete removal of existing treatment of wall surfaces and applying two coats of Oil Bound Distemper washable over a coat of primer, over one coat of white wall care putty 2-3 mm thick in two layers including sanding and preparation of surfaces to a true, even and smooth complete all as specified and directed. Note:- Putty will be measured and paid separately

Preparing the old surface of wall and applying two coats of Ace Apex ultima paint (Anti Fungal) of equivalent in shalimar paints / Berger paint as approved by GE complete all as specified and directed.

Repairs to existing steel rolling shutters , ball bearing, spring including Top Cover, anchoring rod, hasp and staple, erected in position as indicated complete push pull or manual type and rewelding , rops, stoppers, Oiling , greasing , easying etc including necessary replacement of profile, if required guide channel and confirming to smooth function of Rolling Shutters complete all as specified and as directed

Preparation of old treated wall surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and as directed.

Preparation of old treated ceiling surfaces, cornices etc by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying One coat of white wash complete all as specified and directed.

Preparation of old plastered surfaces of walls including washing rubbing down and stopping of distempered / painted surface and applying One coat of distemper Oil emulsion washable on old surfaces on walls including filling and making surface smooth making good chipped off surfaces as required complete all as specified and directed.

Complete removal of existing treatment of wall surfaces and applying two coats of Oil Bound Distemper washable over a coat of primer, over one coat of wall care putty 2-3mm thick in two layers including sanding and preparation of surfaces to a true, even and smooth complete all as specified and directed. Note: Putty will be measured and paid separately.

Wall care putty on wall average thickness 2-3mm in two layers complete all specified and directed.

Preparation of old painted wooden surfaces and wood based materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old painted steel surfaces and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Removing old lime wash (if any), hacking for key, raking out joints of old brick work and scrubbing down with water etc to receive plaster, complete all as specified and as directed.

Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface, in ceiling of chajjas/ roof projection, etc finished even and smooth without using extra cement all as specified and directed

Rendering 15mm thick in two layers on stone masonry surfaces or surface other than fair face of brick work in cement mortar 1:4, finished even and smooth without using extra cement), including mixed with liquid water proofing compound complete all as specified and directed. Note: 1. Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings.

Rendering 15mm thick in two layers on fair face of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement), including mixed with liquid water proofing compound complete all as specified and directed. Note: 1. Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings.

Providing cement concrete type B1 (1:2:4) using 20mm graded stone aggregate in roof kerbs or mud stops, over chajjas as padding, rounded or chamfered on edges including demolition of cement concrete in any position complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (conpany Depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new surfaces all as specified and directed.

Preparation of new plastered surfaces of ceiling and applying two coats of Exterior Emulsion Paint ( Anti Fungal) white or tinted over a coat of primer complete all as specified and as directed. Note :1. Rates shall be quoted with required scafolding for a height upto 10 meter buildings.

Preparation/removal of old treatment of plastered/ stone/brick wall surfaces and applying two coats of Exterior Emulsion Paint ( Anti Fungal) white or tinted complete all as specified and as directed. Note :1. Rates shall be quoted with required scafolding for a height upto 10 meter buildings.

Preparation of old treated/ untreated wall surfaces and applying one coat of Exterior Emulsion Paint ( Anti Fungal) white or tinted complete all as specified and as directed. Note:1. Rates shall be quoted with required scafolding for a height upto 10 meter buildings.

French polish to Old wooden surfaces of any description, any width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till achieving a finished surface complete.

VVM CONSTRUCTIONS

GMS Builders

GUNASEKARAN AND CO

RMR ENGINEERING CONTRACTORS PRIVATE LIMITED

AR Mohamed Yakub and Co