Construction of Ayurvedic Dispensary Building with Quarter at Village Demul

Amount

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering including pumping or bailing out of water wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD.specification of 1990 (One thousand Nine hundred Ninety) Volume-I.

Providing and laying cement concrete 1:5:10 [One cement isto Five sand isto Ten graded crushed hard stone aggregate 40 (Forty) millimeters nominal size] mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, as per H.P.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all iincidential charges.

Random rubble masonry( uncoursed brought to course) with hard stone of approved quality in foundation and plith including levelling up with cement concrete ( 1:6:12( One cement : six sand : 12 graded stone aggregate 20mm ( Twenty millimetre nominal size) in cement mortar 1:6 (One cement : Six sand ) as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden / steel battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all iincidential charges in:

Columns, Pillars, Posts and struts. Square, rectangular or polygonal in plan.

Beams, cantilevers, girders and lintels. Sides and soffits of beams, beam hunching cantilevers, bressumers and lintels in all depths and in all heights from floor.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Upto 20 cm thickness

Edges of slabs and breaks in floors and walls:-under 20 cm(twenty centimeter) wide.

Providing and laying cement concrete 1:2:4 [ One cement isto two sand isto four graded crushed hard stone aggregate 20 (Twenty) millimeters nominal size] and curing complete, excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. specification (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges in:

Columns, pillars posts and struts upto floor two level.

Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel ,

Providing Tor Steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete up to all floor levels/all heights as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges

Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: etc. all complete as per the direction of Engineer-in- charge.Cement mortar 1:6 (1 cement : 6 coarse sand) as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing wood work in frames of doors,windows,clerestory windows and other frames wrought,framed and fixed in position with 2nd class deodar wood as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing panelled glazed or panelled and glazed shutters 40 mm (Fourty milimetres) thick in 2nd class deodar wood for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position. 2nd class deodar wood. as per H.P.PWD. Specification 1990 volume- I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing in wall lining falt pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. completeas per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 2nd class teak wood lipping/ moulded/Cover Square edge cover beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle boardas per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges..

Providing and fixing 19 (Nineteen) millimeters thick commercial board water proof shutters for cup board with hard wood edging on exposed surface, including fixing with nickel plated piano hinges with screws complete as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of hutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing sal ballies in posts purlins, refters, post plates etc. including cost of iron nails and spikes required and applying wood preservative on all unexposed surface. as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 19 (Nineteen) millimeters thick commercial board water proof shutters for cup board with hard wood edging on exposed surface, including fixing with nickel plated piano hinges with screws complete as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing black polythene sheet 0.80 micron below mud roofing on above ceiling as per technical specification received from the Chief Architect HPPWD shimla as per Dwg No 45 Job Nos 7927 as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing mud filling above the ceiling as per local/drawing specifiation as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 2mm thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. completeas per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

roviding and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and Fixed to openings /wooden frames with rawl plugs screws etc. M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and fixing 0.60mm (zero point sixty millimeter) thick pre-painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified poly ster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5microns over 5 microns primer coating including fixing with pre-painted iron Jor L hooks, bolts and nuts 6mm ( six milimeter) dia metre with pre-painted limpet and rubber washers complete with all accessories.as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges .

Providing and fixing ridges or hips 60 cm (sixty centimeter) overall with 0.60mm (zero point sixty milimeter) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five)microns primer coating + back coat of polyster of 5(five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm (six milimeter) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required. as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges .

Providing and laying 1st quality Ceramic Galzed Floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Providing and laying rectified Ceramic Floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality onforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. as per HP.PWD specification 1990(One thousand Nine hundred Ninety) volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting:-Ready mixed paint brushing wood primer pink including carriage of materials in all leads and lifts.

Painting two coats (excluding priming coat)on new wood and wood based surfaces,with ready mixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:-With white paint as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing to wall ceiling floor galvanised mild steel tubes (Medium grade), tube fittings and clamps including making good the wall ceiling and floor including carriage of materials within all leads and lifts. 20mm(twenty milimeter) nominal bore.as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

15mm(fifteen milimeter) nominal bore.

Making connection of galvanized steel distribution branch with galvanized mild steel main line 20 mm to 40 mm (twenty milimeter to forty milimeter) nominal bore by providing and fixing tees including cutting and threading the pipes complete including carriage of materials within all leads and lifts. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing chamber 600mm x 600mmx750mm inside size for fire hydrants with C.I. surface box 350mmx 550mm top and 165 mm deep (inside) with changed lid and RCC top slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 100mm thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete :-With 200mm. Precast cement concrete block Masonry wall with solid concrete block of cement concrete 1:3:6 (1cement :3 sand : 6 graded stone aggregate 20mm down gauge) in cement mortar as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orissa Pattern long pattern as per pattern No.20042. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan)ISI marked inclding jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. 150 mm (one hundred fifty milimeter) dia.as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 10.00 ltr(ten point zero zero liter)capacity PVC low level duel flusushing system cistern CERA catlogue No.2603 or equivalent with a pair of brackets with fittings such as lead valve, less syphon, 15mm(fifteen milimeter) nominal size PVC ball valve with polythene float, PVC handle, union and coupling for connection with inlet, outlet and overflow pipes 40mm(forty milimeter) dia PVC flush bend with cistern and closet and over flow pipe to be paid for separately) as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing Flat back type of size 430mm x 260 mm x 350mm. ( Four three zero milimter into two six zero into three five zero milimeter) vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings . as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location of site through all modes of transportation in all leads and lifts, including all iincidential charges.

Providing and fixing 610x510x200mm(six hundred ten into four hundred ten into two hundred milimeter) stainless steel kitchen sink of approved standard ISI make with drain board and CP waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing pipes on wall face PVC Finolex type-B spigot socket, waste and ventilating pipes of working pressure not less than 4.5kg/sqm (four point five kilogramme per square meter) including coller and filling the joints with approved adhesive with required No. of PVC Finolex clamps complete including carriage of materials within all leads and lifts. 110 (One hundred ten) millimeters nominal size. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

150 millimeters nominal size.

110 Millimeters nominal size.

90 Millimeters nominal size.

75 millimeters nominal size.

Providing and fixing PVC Finolex single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

150 millimeters nominal size.

110 Millimeters nominal size.

90 Millimeters nominal size.

75 millimeters nominal size.

Providing and fixing PVC door bends of any degree with oval access door insertion rubber washer 3 (Three) millimeters thick, bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

150 millimeters nominal size.

110 Millimeters nominal size.

90 Millimeters nominal size.

75 millimeters nominal size.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

150 millimeters nominal size.

110 Millimeters nominal size.

90 Millimeters nominal size.

75 millimeters nominal size.

Peroviding and fixing PVC collars ISI marked including fixing with approved adhesive etc. ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

150 millimeters nominal size.

110 Millimeters nominal size.

90 Millimeters nominal size.

75 millimeters nominal size.

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

150 millimeters nominal size.

110 Millimeters nominal size.

90 Millimeters nominal size.

75 millimeters nominal size.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

150 millimeters nominal size.

110 Millimeters nominal size.

90 Millimeters nominal size.

75 millimeters nominal size.

Providing and fixing C.P. Brass waste for wash basin or sink 40 mm Dia (heavy duty ISI marked IS: 8931 & 8934) including carriage of materials within all leads and lifts. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 40 mm(Forty milimeter) dia M.I. Union for wash basin or sink including carriage of materials within all leads and lifts. as per direction of Engineer-in-Charge.as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing 600mm x 450 mm (six hundred into four hundred fifty milimeter) bevelled edge mirror of superior glass mounted on 6mm (six milimeter) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washer including carriage of materials within all leads and lifts. as per direction of Engineer-in-Charge.as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing C.P. brass towel rail ISI marked IS: 8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws:-600mmx20mm(six hundred into twenty milimeter) including carriage of materials within all leads and lifts. as per direction of Engineer-in-Charge.as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing C.P. brass toilet paper holder including carriage of materials within all leads and lifts. as per direction of Engineer-in-Charge.as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts. as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing CP brass bib tap (heavy duty ISI marked IS:8931 and 8934) of jaguar with capstan head 15mm(fifteen milimeter)diaincluding carriage of materials within all leads and lifts.

Providing and fixing PTMT gratting Sqauare hole to approved quality and colour 150 m nominal dia as per HP.PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Constructing manhole with reinforced cement concrete top slab 1:2:4(One cement: Two sand: Four graded hard stone aggregate 20 (Twenty) millimeters nominal size),foundation concrete 1:4:8(One cement isto Four sand isto Eight graded hard stone aggregate 40(Forty)millimeters nominal size inside plastering 15(Fifteen)millimeters thick with cement mortar 1:3(One cement isto Three sand)finished within a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded hard stone aggregate 20 (Twenty) millimeters nominal size) finished smooth complete including curing and testing - With 300 mm thick walls SR masonry coursed with hard stoes of approved quality in cement mortar 1:3 ( 1 cement: 3 sand )

NAMGIAL DORJE