Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹32.2 LAdmitted-Finance | -37.33% | ₹32.2 L | L1 | Admitted-Finance |
| 2 | L2₹33.9 L+₹1.7 L (5.20%)Admitted-Finance | -34.95% | ₹33.9 L+₹1.7 L (5.20%) | L2 | Admitted-Finance |
| 3 | L3₹34.4 L+₹2.2 L (6.75%)Admitted-Finance | -32.95% | ₹34.4 L+₹2.2 L (6.75%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s. BAJRANG LAL AGARWAL L3 | RAM SWAROOP NIRWAN CONTRACTOR L2 | M/s TANMAY TRADERS L1 |
|---|---|---|---|---|---|---|
| .01PART- B (Item Rate Basis) | ||||||
| 1.00 | Repair of pannel board for submersible pump installed at various JPD premises including changing/repairing of Capacitor/Voltmeter/ammeter/relay/indicating lamps for start and run position/ any part to make pannel board in working condition complete in all respect as per directions of Engineer in Charge. The job also includes warranty of pannel board upto maturity of SD work including frieght charges of parts with mechanics upto shop required if repairing of panel board attended again within warranty preiod 1.0 HP to 3.0 HP (Single phase) | 100 | Each | 614 ₹61,400 | 250 ₹25,000 | 200 ₹20,000 Lowest |
| 2.00 | P&F of 4 nos HSFG nuts and bolts of 3" size as per IS specification along with washer and heavy duty rubber seal for jointing of GI pipes of 32/50mm dia for submersible pump i/c all labour, transortation, T&P complete as per direction of E/I. | 200 | Each | 47 ₹9,400 | 10 ₹2,000 Lowest | 10 ₹2,000 Lowest |
| 3.00 | P&F Steel nipples with nuts and bolts for jointing/extending 40mm OD HDPE Pipe including all T&P labour etc as per directions of Engineer in Charge for all lead and lift | 20 | Each | 165 ₹3,300 | 50 ₹1,000 | 10 ₹200 Lowest |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
3 Jul 2026, 3:00 pmClosed
SE CIVIL JVVNL
SE CIVIL JVVNL OPH, RAM MANDIR BANI PARK JAIPUR
Various civil works for repairing, deepening and maintenance of Bore wells with submersible pump at various places under XEN(O and M) DDI, DDII, Dudu, Vatika Sambhar (2026-27)
2026_JVVNL_571333_1
E-NIT 02/2026-27
Open Tender
Civil Works
Percentage
365 days
Dudu
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
A O(JCC)JVVNL,Jaipur Through NEFT/RTGS/IMPS/UPI
₹96,000
Yes
10 Jul 2026
26 Jun 2026
6 Jul 2026
26 Jun 2026
3 Jul 2026
26 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.001 | PART-A (Bldg.) | - | - | - | - |
| 1 | 2.7.1/PHED
Deepening of existing tube well by DTH system beyond existing depth upto 100 mtr. and above in all type of rocks including flushing of tube well and obtaining sand free water. Nominal bore 150 mm dia. | 300 | mtr | 927 | ₹2,78,100 |
| 2 | 2.24.1/PHED
Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. 32 mm dia. | 1,000 | mtr | 419 | ₹4,19,000 |
| 3 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc for holding the riser pipe assembly of submersible pump set. (2.22) | 50 | No. | 727 | ₹36,350 |
| 4 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. 200 mm dia. (2.23.3) | 30 | No. | 1,030 | ₹30,900 |
| 5 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.
(A) 3 core 4.0 Sq.mm. (P 2.19.1) | 2,000 | Rmt | 211 | ₹4,22,000 |
| 5.01 | (B) 3 core 6.0 Sq.mm. (P 2.19.2) | 400 | Rmt | 314 | ₹1,25,600 |
| 6 | Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. Above 2.0 KW. (2.14.2/PHED) | 40 | KW | 12,896 | ₹5,15,840 |
| 7 | Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. Up to 5.5 KW (7.5 HP) & head above 120 mtr.. (2.15.2/PHED) | 22 | KW | 9,988 | ₹2,19,736 |
| 8 | SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .For single phase submersible / Monoblock pump 2.0 HP to 3.0 HP (DOL starter). (21.13.1.2) | 60 | nos | 5,406 | ₹3,24,360 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.90 MB
Tendernotice_2.pdf
PDF • 2.51 MB
BOQ_1016551.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .