Widening of Road From Basaveshwara Circle to Kodla Cross (Ch 650.00 to 1450.00 mtr) at Sedam Town in Sedam Taluka Kalaburagi Dist Under KKRDB Macro Infrastructure General For The year 2024-25 (Work Code KLB2411123747)

1 Construction of BT Road

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Prime Coat over WMM/WBM Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0....

Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.0 per cent by weigh...

Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...

Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and filler, t...

2 Construction of RCC Drain L/S and R/S

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Addendum I Additionalities for Formwork, Centering & Scaffolding For Add 35% Cement Concrete Drain Walls ….including Cost of all materials,labour,HOM,I & UL Curing With all lead and Lifts etc,Comple...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

3 Extension of Two Vent Box Culvert L/S and R/S at Ch 990m

suraface Excavation

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Appendix I Additionalities for Formwork, Centering & Scaffolding For Box Culvert Add 20% ….including Cost of all materials,labour,HOM,I & UL Curing With all lead and Lifts etc,Complete Asper Specifi...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Appendix I Additionalities for Formwork, Centering & Scaffolding For Box Culvert Add 20% ….including Cost of all materials,labour,HOM,I & UL Curing With all lead and Lifts etc,Complete Asper Specifi...

Supplying, Fitting and Placing un-coated TMT bar Reinforcement in sub-structure complete as per Drawing and Technical Specifications. All other type of structures

Drainage Spouts using 100 mm GI pipe Complete as per drawing and Technical specification

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the full width of the structure with s...

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, c/c spacing between vertical post n...

4 Construction of Divider

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Addendum I Additionalities for Formwork, Centering & Scaffolding For Add 5% Road medians, Traffic Separators, Dividers etcincluding Cost of all materials,labour,HOM,I & UL Curing With all lead and Lif...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal ...

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

5 Decoretive Street Light From Ch 650 to 1440 mtr

Decorative light pole : Fabricating,Supplying and errection of 10mtrs long hot dip Galvanized conical pole with BSEN 10025 grade S 355 JO steel plate for Shaft IS 2062 for the base plate with door ope...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130- 1984 and (Virgin) PVC insulation and sh...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross- 3 with Short circuit breaking c...

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.

Supplying and fixing HRC fuse units base on existing switch/panel board. 6 to 16Amps

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sqmm, ...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, 16Sqmm, 4Core, (11 GI Strips - 4 x 0.8 mm) ESCOMs SR 2023-24/Vol-6...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm Escoms 2023-24/Vol-6/Part-II/Sl.No.174/I...

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1

Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Escoms 2023-24/Vol-6/Part-II/It No.2...

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wit...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and

M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then

two coats of approved paint. 40...

Supplying and fixing of LED type panel board indicating lamp with required colour

suitable for 220v A.C. 50 Hz 12/24v D.C CSR 2023-24/PWD/Elec/Vol-6/Chapter-5/It No.5.38/Pg.No.19 of 105

Supplying, fixing and wiring electronic 10 to 40 Amps three phase 4 wire class-1 Accuracy Energy Meter. CSR 2023-24/PWD/Elec/Vol-6/Chapter-5/It No.5.35/Pg.No.19 of 105

Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter CSR 2023-24/PWD/Elec/Vol-6/Chapter-5/It No.5.29/Pg.No.19 of 105

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross- 3 with Short circuit breaking c...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross- 3 with Short circuit breaking c...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel

using necessary nuts, bolts and washers. 63Amps CSR 2023-24/PWD/Elec/Vol-6/Chapter-5/It No.5.7.3/Pg.No.14 of 105

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 15"x12"...

Supplying and fixing Microprocessor based Astronomical timer with using necessary bolts, nuts and washers etc. CSR 2023-24/PWD/Elec/Vol-6/Chapter-5/It No.5.48/Pg.No.21 of 105

GI Pipe as per IS-2509 PVC Pipe - 50mm Dia

Escoms 2023-24/Vol-6/Part-II/Sl.No.46/It No.48.05/Pg.No.38 of 81

Open Conduit System Supplying heavy gauge PVC conduit pipe 40mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plug...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Addendum I Additionalities for Formwork, Centering & Scaffolding For Add 8% For Isolated footing ….including Cost of all materials,labour,HOM,I & UL Curing With all lead and Lifts etc,Complete Asper...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40Amps ...

Construction of RCC Drain at Udgi Cross Bridge At L/S

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Addendum I Additionalities for Formwork, Centering & Scaffolding For Add 35% Cement Concrete Drain Walls ….including Cost of all materials,labour,HOM,I & UL Curing With all lead and Lifts etc,Comple...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...