GE863/EWS-T-42 OF 2022-23

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete, all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete etc, complete, all as specified and directed.

M &L for pre-cast cement concrete type C1 (1:3:6) using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:6), complete, all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel or drain or benching in manhole etc complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 finished even and smooth (without using extra cement), complete, all as specified and directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete, all as specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil, complete, all as specified and directed.

M&L for removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point, complete, all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

S&F 0.63 mm thick galvanized corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof, walls etc with grade of zinc coating 275, complete, all as specified and directed.

ditto as per item No 10 but except sheet.

Dismantling of wrought iron or mild steel work any description and fixed in any position, complete, all as specified and directed.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W, grade 250, Quality A, including cleats,distance pieces etc, complete, all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer,complete, all as specified and directed.

M & L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coats of synthetic enamel paint (ordinary tint)., complete, all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet, complete, all as specified and directed.

M & L 4 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc,complete, all as specified and directed.

M & L for Second class hard wood as in plain fillets, square, rectangular, traingular in section wrought secured with nailsor brads of sectional area exc 3 Sq cm & not exc 6 Sq cm, complete, all as specified and directed.

Dismantling timber scantlings under 40 sq.cm in section, in any positions as in framed work but in fillets, rails, posts, rafters, purlins, etc, complete, all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 & n .exc 25 sq complete all as specified and directed.cm complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in framed work or Framed work complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames). including removing from site, complete, all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames) including removing from site, complete, all as specified and directed.

S&F 1.25 mm thick pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete, all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C1 filling of pressed steel frame and hold fast block etc, complete, all as specified and directed.

S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete, all as specified and directed.

S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009), complete, all as specified and directed.

S & F galvanised mild steel wire cloth , 0.56 mm nominal dia of wire and average width of aperature 1.18 mm, complete, all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete, all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing, complete, all as specified and directed.

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section etc, complete, all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt 12 mm dia incl minimum of 6 bolts annd nuts of extruded sections or cast-aluminium alloy and fixed, complete, all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises, complete, all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course, complete, all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed cement to match complete all as specified and as directed

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced), complete, all as specified and directed.

M &L for 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate finishing surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M & L for providing, cement concrete cast in situ 1:2:4 , type B1 (Using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including form work, complete, all as specified and directed.

Demolition of PCC block/ Stone masonary built in cement mortar including all quions, arches,pillars etc but precast concrete block walling, complete, all as specified and directed

M & L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement), complete, all as specified and directed.

M&L for rendering 15 mm thick on stone masonary surfaces in CM 1:4 finishing even and smooth using extra cement, complete, all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for coping, parapaet, thrust block and other similar items complete all as specified and directed.

M&L for Preparation of new wall surface, and applying three coat of White wash, complete, all as specififed and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete, all as specified and directed.

Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition, complete, all as specified and directed.

M&L for Precast cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed.

Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to store, complete, all as specified and directed.

Supply and fix new rotational moulded polyethylene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top ,with screwable lid) , double layered ,ISI MARKED , hoisted and fixed in position at any height, including 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) & reconnetcing/refixing of pipes inlet , out let and air pipe, complete, all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete, all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete, all as specified and directed.

S & F 15 mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

S & F 20 mm bore tubes 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

Refixing old steel tubing and connection 15 mm bore in new or old position in wall, ceiling and floor etc, complete, all as specified and directed.

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc, complete, all as specified and directed.

S&F in replacement of 15 mm dia stop cock of copper alloy screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union complete all as specified and directed.

S & F in replacement of 15mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete, all as specified and directed.

S & F in replacement of 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe, complete, all as specified and directed.

S&F in replacement of 15 mm dia brass CP mixer for mixing hot and cold water, screwed down for iron pipe and fixed, complete, all as specified and directed.

S&F in replacement of Towel Rail 600 mm long of PTMT fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms), complete, all as specified and directed.

S & F in replacement of Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long, complete, all as specified and directed.

S & F in replacement of PVC connections 15mm size with PTMT nuts of length 450 mm, complete, all as specified and directed.

S & F in replacement of Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

Supply and fixing vitreous china (white) first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet , complete including fixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable, complete, all as specified and directed

Supply and fix, Vitreous China wash down water closet EWC (pedestal pattern), standard size , white (including fixing bolts, flushing cistern and flush pipe), plastic seat and cover white, closed pattern with flat bottom, mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, fixed as in repairs, and removal of old from site, complete, all as specified and directed.

S&F in replacement of PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

M & L PVC (SWR) floor trap 75 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in replacement of PTMT grating, doom 100 mm size(min wt 25 gms), complete, all as specified and directed.

S&F 32 mm dia low density polythene (LDPE) of pressure rating @ 6 kgf per Sq cm fixed to walls, ceilings or flooraetc, complete, all as specified and directed.

S&F 50 mm dia low density polythene (LDPE) of pressure rating @ 6 kgf per Sq cm fixed to walls, ceilings or flooraetc, complete, all as specified and directed.

Demolition of and breaking up drain pipes (salt glazed ware) 100mm/150 mm dia set in cement mortar, complete, all as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded stone aggregate) as in bed of drain for 100mm bore pipe incl packing under and completely surrounding pipes with concrete after they are laid in and tested complete all as specified and directed.

S & F PVC (SWR ), pipes of 110 mm dia single socketed , in any length with rubber ring joints , laid in trenches or in floor complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) including fitting such as switches, ceiling roses,pendents, regulators, sockets, gang box, hylem sheets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc, complete, all as specified and directed.

M&L for wiring with single core PVC insulated FRLSH and unsheathed 1100 Volts grade cable with multistranded copper conductor of size 1.5 Sqmm nominal area of cable for continous earthing in and including PVC casing and caping with accessories having ISI marked fixed to wall surface/ceiling including provision of PVC box of appropiate size for fixing switches, sockets etc, complete, all as specified and directed for the followings :-

For one light point, Fan/exhaust fan & call bell point controlled by one single pole switch

For one 3 pin socket outlet 5 Amps on the same board with other switches with cable of size 1.5 Sqmm

For 3 pin socket outlet 5 Amps inpendent with cable 1.5 Sqmm size.

For one 3 pin socket outlet 15 Amps independent with copper cables of 2.5 Sqmm size.

S&F in replacement of switch piano, flush type single pole, one way, 5 Amps, 240 Volts, complete, all as specified and directed.

S&F in replacement of socket outlet, 3 pin 5 Amps, complete, all as specified and diretced.

S&F in replacement of switch piano, flush type single pole, one way, 15 Amps, 240 Volt, complete, all as specified and directed.

S&F in replacement of socket outlet, 3 pin 15 Amps, complete, all as specified and diretced.

S&F in replacement of ceiling rose, 3 phase polycarbonate isolated body including junction round PVC cover plate with brass screw/nuts, complete, all as specified and directed.

S&F in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheating of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm dia MS suspension wire, one twin core cable flat or circular of size 16 Sqmm 2 core, complete, all as specified and directed.

M&L for earthing complete with galvabized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground/earth pit not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including using galvanized iron wire of 4 mm thick as earthing lead by means on bolts nuts, check nuts and washers of galvanized iron or steel earth plate surrounded by alternate layers packed with char coal dust and common salt 15 cm thick and 15 cm wide all around bottom and top and watering pipe 20 mm bore of GI light grade with funnel wire mesh and 40 mm dia GI protection pipe medium grade as shown in elctrical plate No 3 of SSR Part -I and connected to earthing test point and including testing on completion, all as specified and directed. Note :- Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5 m from pit cover will be meaured separately.

S&F in replacement of factory made epoxy polyster powder coated distribution board double door, SPN 8 way fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP -65 protection) fixed flush to wall and standard 100 Amps DIN rail earth bar and cable ties for cable management, complete, all as specified and conforming to IS 8623. Note : Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate.

S&F in replacement of MCB SPN 40 Amps, 10 KA , 230 Volts, 50 Hz complete, all as specified and directed.

S&F in replacement of MCB SP 6-32 Amps, 10 KA , 230 Volts, 50 Hz complete, all as specified and directed.

S&F in replacement of retrofit wall mounted 4 ft long LED T8 tube light of 20 Watt with extruded aluminium/PC body and PC diffuser complete with inbuilt driver including Blue coloured end caps, Pre wired for LED tube, complete, all as specified and directed. Make : Havells, C&S, wipro, philip, Bajaj.

S&F in replacement of Integrated wall mounted LED bulk Head of 10 watt luminare comprises of pressure die cast housing, Acrylic diffuser & frame, IP 65 protection & in 6000 K temperature including connecting up with flexible copper conductor cable including PVC conducting from ceiling rose to terminal block and testing complete, all as specified and directed. Make : Havells, C&S , Philips, wipro, CG, Bajaj.

S&F surface & wall mounted retrofit LED mirror light 2 feet 10 Watt with all accessories all as specified and directed. Make : C&S, CG, Philips, Havells.

M&L in replacement of Lamp holder PVC/Polycarbonate type with back plate, complete all as specified and directed.

S&F in replacement of LED lamp/bulb 9 watt system lumen with all accessories, complete, all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 30835.00 for old Materials as per Schedule of Credit.

R B TRADERS