Guindy TANSI Plug and Play

Amount

Installation charges for Pile Boring Equipments inclusive of transportation to site and special assembling the bored pile equipment employed for the works including setting up pile boring equipments with all accesaries and tools at each of the pile location based on the sequense of operation approved by the departmental engineers, in respect of the location and distance involved in movements of pile boring equipment for all sizes of piles and dismantaling for bored pile equipment etc.complete. The work should be carried out as per relevant : IS - 2911, IS - 786 and IS - 456 of latest version, standard specification, as per site condition and as directed by the TANSIDCO Engineers etc., complete.

Installation of Vertical Bored Cast in-situ Pile of 500 mm diameter in all types of soil. The rate excludes cost of concrete, reinforcement, binding wire, fabrication, welding charges, but includes cost of boring to the required depth with Bentonite solution with Temporary casing of required length, placing of reinforcement cage in borehole in correct position, including all tools & plants, shifting the plants and equipments from one point to another. Excavation of mud pits for circulation of Bentonite solution, closing the mud pits to the original level and mud removal etc., complete and as directed by the TANSIDCO Engineers.

Dismantling Reinforced Cement Concrete in pile using deploying machineries, clearing away and carefully stacking materials useful for reuse for any thickness of walls etc., complete.

Initial Load Test as per IS 2911 Part IV 1985 including cost of special single pile (250% of pile capacity), labour, reinforcement charges and all other incidental charges including excavation, shoring, strutting, dewatering as necessary, hire charges for jacks, measuring devices, structural frame work for platform kent ledges etc., as required and providing pilecap. The work should be carried out as per relevant : IS - 2911, IS - 786 and IS -456 of latest version, standard specification as per site condition and as directed by the TANSIDCO Engineers etc., complete.

Routine Load Test as per IS 2911 Part IV 1995 (150% of pile capacity including labour charges and all other material charges including hire charges for jacks, measuring devices, structural frame work for platform kent ledges etc., as required. The work should be carried out as per relevant : IS - 2911, IS - 786 and IS - 456 of latest version, standard specification as per site condition and as directed by the TANSIDCO Engineers etc., complete

Earth work excavation for foundation in all kinds of soils and subsoils to the required depth as may be directed except hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary, refilling the sides of foundation and basement with excavated earth in layers of 15cm thick well rammed, consolidated and depositing the surplus earth in places shown with an initial lead of 10 meters and clearing, levelling the site etc., complete. a. upto 2.00 depth below Ground level

Earth work excavation for foundation in Soft Disintegrated Rock, laterite, soft rock or kankar, not requiring blasting including shoring, strutting, bailing out water wherever necessary & all other incidental charges and depositing the surplus earth in places shown with clearing, levelling the site etc., complete.

Below GL from 2.00m to 3.00m depth

Below GL from 3.00m to 4.00m depth

Conveyance the Surplus Earth to the places shown by the Engineer incharge including unloading from lorries, spreading and leveling in places indicated as instructed by the Engineer incharge with a lead of 1 to 2 km etc., complete.

Providing Pre-construction Antitermite Treatment using chlorpynphos emulsifiable concentrate 20% with 1% concentration as per specifications etc., complete (The plinth area of the building at ground floor only shall be measured for payment)

Supplying and filling in foundation and basement with Crushed Stone Sand (M Sand) in layers, not exceeding 150mm thickness well rammed, watered and consolidated complying with relevant standared specification.

Supplying and filling in foundation and basement with Stone Dust and in layers, not exceeding 150mm thickness well rammed, watered and consolidated complying with relevant standard specification.

Plain Cement Concrete 1:5:10 (One of cement, five of M Sand and ten of coarse aggregate) using 40mm Gauge Hard Broken Stone Jelly for foundation and basement inclusive of dewatering if found necessary, shoring, strutting, side shuttering, ramming, curing and laid in layers not more than 15cm thick etc., complete complying with standard specification.

Ready Mixed Cement Concrete of M30 grade including pumping at all floors with minimum cement content of 400 kg per cubic meter of ordinary portland cement with 100mm slump using HRWRA Ad-mix, M Sand,12mm and 20mm gauge HB stone jelly for all RCC items of works excluding centering, shuttering and also cost of reinforcement grill in position but including laying, curing and finishing etc., complete and also fixing fixtures like fan clamps in the RCC floor / roof slab wherever necessary etc., complete complying with standard specifications and as directed by the departmental officers.

Below GL from 1.50m to 4.50m depth

For Foundation and Basement

For Ground Floor

For First Floor

For Second Floor

For Third Floor

For Terrace Floor

Plain Cement Concrete 1:2:4 (One of cement, two of M Sand and four of Aggregate) using 20mm gauge Hard Broken Granite Stone Jelly inclusive of dewatering if found necessary, shoring, strutting, side shuttering, ramming, curing and laid in layers not more than 15cm thick etc., complete complying with standard specification.

For Ground Floor

For First Floor

For Second Floor

For Third Floor

For Terrace Floor

Supplying, fabricating and placing Reinforcement Steel of high yeild strength ribbed bar of various diameter and grade confirming to IS1786 of reinforced concrete work. The work including decoiling, straightening, cutting, bending, fabricating and placing in position at all levels and floors including lead and lift according to drawings, specifications, etc complete. Supply and use of 18Gauge black annealed binding wire double fold to tie the bars in position, chairs pins, space bars, unauthorised laps which will not be measured separately neither for payment nor for reconsilation and providing precast cement / pvc cover blocks for main reinforcement to ensure specified cover and as directed. Steel and binding wire will be procured by the contractor at his own cost.

Supplying and erecting steel Shuttering including necessary supports for Plane Surfaces for reinforced cement concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps etc which requires only nominal strutting using mild steel sheets of size 90 x 60cm and 10 BG stiffened with welded mild steel angle of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size 10cm x 6.50cm spaced at about 75cm centre to centre or at suitable intervals etc., complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting Centering for sides and soffits including necessary supports and strutting upto 3.29m height for Plane Surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90 x 60cm and 10 BG stiffened with welded mild steel angle of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre to centre etc., complete complying with standard specification. (Payment for centering shall be given after the concrete is laid).

For Plane Surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams etc.

For Plane Surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing etc.

For Plane Surfaces such as vertical slab, side slab of boxing, vertical drops, facia, vertical wall etc.

Providing additional strutting to centering for all floors RCC slabs of Plane Surface of every additional 1m height or part thereof but not less than 30cm over an initial 3m height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.

Brick Work in Cement Mortar 1:5 (One of cement and five of M Sand) using second class bricks of size 9" x 4 1/2" x 3" including curing etc., complete complying with standard specification.

For Foundation and Basement

For Stilt Floor

For First Floor

For Second Floor

For Third Floor

For Fourth Floor

Brick Partition Wall 11.50cm thick using second class bricks of size 9" x 4 1/2" x 3" in Cement Mortar 1:3 (One of cement and three of M Sand) including fixing hoop iron reinforcement if found necessary, laying, finishing and curing etc., complete complying with standard specification and as directed by the SIDCO Engineers. (Hoop Iron Reinforcement will be measured and paid separately).

For Ground Floor

For First Floor

For Second Floor

For Third Floor

Special Ceiling Plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One of cement and three of M Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing etc., in all floors complying with standard specification and as directed by the SIDCO Engineers.

Plastering with Cement Mortar 1:5 (One of cement and five of M Sand) 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the SIDCO Engineers.

Paving the floor with AntiSkid Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm laid in all floors over 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One of cement and three of M Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg/ sqm etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Paving the floor with Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in all floors using Cement Mortar 1:3 (One of cement and three of M Sand) 20mm thick and the top pointed with the white cement mixed same colour pigments, acid washing, epoxy grout of laticrete base, hairline joints etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works).

Dadooing the Walls with Ceramic design Tiles of size 300mm x 200mm x 6mm of approved quality laid in all floors using Cement Mortar 1:2 (One of cement and two of M Sand) 10mm thick and pointing with white cement using 0.4 Kg / m² including adding suitable colour pigments to suit the colour of tiles including finishing the joints neatly and curing etc., complete complying with standard specifications. (The tiles should be got approved by the SIDCO Engineers before use on the work).

Finishing the floor with Plain Cement Concrete 1:2:4 (One of cement, two of M Sand and four of coarse aggregate) using 10mm & 12 mm gauge Hard Broken Granite Stone Jelly including finishing the top, rubbed smooth, threading, curing and finishing with machine power trailer etc., complete complying with standard specification and as directed.

For Ground Floor

For First Floor

For Second Floor

For Third Floor

Supplying and fixing in position of 35mm thick Solid Core Flush Door Shutters Single Leaf in all floors with TW ply on both sides and with TW lipping of size 35 x 12mm on all edges with necessary adhesives and C.P. Screws Alu. Butt Hinges (3 Nos. 125 x 30mm size) Alu. Aldrop 1 No. 300 x 16mm size, Alu. Tower Bolt 1 No. 300 x 12 mm size, Alu. Tower Bolt 1 No. 150 x 12mm size, 1 No. Ornamental Handle 150mm length, 1 No. Alu. Door Stopper with rubber bush shall be provided as directed by the SIDCO Engineers etc., complete.

Manufacturing, Supplying and fixing Mild Steel Single Leaf Door of size 1.20 x 2.10m using MS angles of size 40 x 40 x 6mm at 3.5 kg/m for the door outer frame, MS angles of size 25 x 25 x 3mm at 1.10 kg/m for the shutter outer frame and shutter made out of 14 gauge MS sheet on both sides including 3 Nos. of MS hold fast, 3 Nos. of 100mm MS butt hinges, 1 No. of 30cm MS long aldrop, 1 No. of 30cm MS tower bolt and 1 No. of 20cm MS tower bolt including painting two coats of ready mixed primer over a red oxide primer. The rate is inclusive of cost of all materials, fixing charges, welding charges with locking arrangements, transportation charges and all other incidental charges as directed by the SIDCO Engineers etc., complete.

Supplying and fixing wood polymer composite board solid door frame and 25mm thick shutter frame corners of extruded outer size 75mm X 50mm the inner core more rigid WPC composite with minimum shore hardness of 55 and bulk density 0.8 Grams per cubic centimeters. The frame shall be fixed to the wall using 10 X 100 mm long MS screw through the frame through the pvc fastener. Minimum three numbers of screw to be provided for each vertical member. The overall size of frame shall be with suitable rebate for housing shutter and shutter consist of 25mm polymer composite board single core exhaust with one side embo printing design. To avoid duplicate from the printing design shall have logo of the WPC board shall be bount aid proved by kept official. The shutter shall be provided with 3 Nos of 4” SS butt hinges, 2 Nos of 4” Stainless Steel handles, 3 Nos of 6” Stainless Steel tower bolts with required Stainless Steel screws including labour charges for fixing the shutter frame, shutter and furniture fittings in position and finished smooth with template etc., all complete in all respects complying with relevant standard specification and as directed by the departmental officers

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI Monogram (Manually Operated upto 8 sqm. Area) with ISI make of approved size and section using 18 GI sheet in all floors. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc complete and as directed by SIDCO Engineers.

Supplying and fixing Mild Steel Grills as per the design approved to doors, windows or ventilators using MS flats or square rods for inner and outer members including cost of steel & angles and labour for fixing in position etc., complete complying with standard specification and as directed by the SIDCO Engineers.

Painting the New Walls with two coats of approved interior Emulsion Paint of approved quality and shade in all floors in two coats over one coat of primer to give an even shade and two coats of POP Putty (600/50) including scaffolding, curing etc., complete. The rate including all materials for putty, primer, emulsion paint and all labour charges and as directed by the SIDCO Engineers (The quality and colour of the emulsion, putty and primer shall be got approved from the Executive Engineer before use on work).

Painting the New Walls with two coats of approved weather shield exterior Emulsion Paint in all floors in addition to one coat of approved primer cement paint over cement plastered wall surfaces etc., including cost of Emulsion paint, putty, brushes, watering, curing etc., all complete in all respects and as directed by the SIDCO Engineers (Paints and its shade shall be got approved from the Executive Engineer before using).

Weathering Course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the SIDCO Engineers. For Terrace Floor

Finishing the top of terrace floor over the weathering course with one course of anti / solar reflective water proof, heat proof, cool proof ceramic tiles of size 300 mm x 300 mm x 6mm thick of approved quality laid in cement mortar 1:3 (One of cement and three of M Sand) mixed with ABC plus powder (60 kg for 1000 sqft) and the top pointed with cement mortar 1:3 (One of cement and three of M Sand) mixed with ABC grout powder (20 kg for 1000 sqft) and zycosil oil (200 gm for 1000 sqft) compound including cost of all materials, labour for lifting to open terrace, laying, finishing and all other incidental charges etc., complete complying with standard specifications and as directed by the SIDCO Engineers.

Flooring with Brick Jelly Concrete 1:4:8 (One of cement, four of M Sand and eight of aggregate) using brick jelly of size 40mm including labour charges etc., complete complying with standard specification.

For Ground Floor

For First Floor

For Second Floor

For Third Floor

Supplying and fixing in position 160mm dia PVC Rain Water Down Fall Pipes of best approved finolex (or) equivalent with ISI monogram having a pressure of 4 Kg / Sq cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including neat finishing from open terrace to GL. The rate shall be inclusive of cast of removable cast iron gratings. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipeline in addition to those for more than 3.0m pipe length etc., complete complying with standard specification.

Plastering with Cement Mortar 1:3 (One of cement and three of M Sand) 20mm thick in all floors mixed with water proofing compound at 2% by weight of cement used, including centering, strutting, finishing and curing etc complete complying with standard specification.

Manufacturing, supplying and fixing of Stainless Steel Hand Rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm, thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges etc., complete complying with standard specification and as directed by the SIDCO Engineers.

Supplying and fixing in position Indian Water Closet (Oriya Type) of size 580 x 440mm Colour Glazed Earthernware of approved quality and brand with "P" or "S" Trap conforming to IS with Sand Cushion and forming flooring alround the closet using 40mm Broken Brick Jelly in Lime Concrete 1:2:5 (One of lime, two of M Sand and five of brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI Soil Pipes / PVC Pipes (including the cost of 100mm dia CI Pipe / PVC PIpes of 110mm dia OD for a length of 600mm) by dismantling Brick Masonry Wall / Reinforced Cement Concrete Roof / Floor Slab and making good the dismantled portion to the original conditon with leakages etc., complete complying with standard specification and as directed by the SIDCO Engineers. (The Water Closet should be got approved by the Executive Engineers before use on work).

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position best quality of approved make Colour Glazed Earthernware WASH HAND BASIN (without pedastal) of size 550 x 400mm with a pair of cast iron brackets including cost of 15mm diameters brass chromium plated pillar tap, 32mm diameter C.P Waste, 32mm diameter PVC Waste Pipe with rubber plug and chain, 15mm diameter gun metal wheel valve, 15mm diameter brass nipple, 15mm diameter nylon connectin etc., including fixing the wash hand basin in the wall in position with pair of C.I.Brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anti-corrosive paint including testing for leakage etc., complete complying with standard specifications and as directed by the SIDCO Engineers. (The wash hand basin and specials should be got approved by the SIDCO Engineers before use on work).

Supplying and fixing in position of best Indian Make White Lipped Mouth Porcelain Flat Back Urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI Pipe, 32mm dia Bell Mouth PVC connection and Waste Pipe, 15mm dia GI Pipe of required length, 15mm dia GM Wheel Valve, 15mm dia Brass Nipple 2 Nos., and fixing the Urinals in position with necessary TW Plugs, Clamps, Screws etc., including dismantling masonry and re-doing the same to the original condition etc., including painting the pipe with two coats of best quality approved Synthetic Enamel Paint over one coat of Red Oxide Primer and checked without any leakage etc., complete complying with standard specifications and as directed by the SIDCO Engineers. (The Urinal should be got approved by the Executive Engineer before use on work).

Providing two legged Scaffolding using 13-15cm dia blue gum posts or casurina post or best quality bamboo post of 31.50m overall length (30.50m height + 0.50m projection + 0.50m into the ground). The distance between the two rows being 2m and the spacing of posts being 2m in both rows with two horizontal posts with 0.50m overlap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc. in a complete form using coir and nails for the initial height of 3m and for providing scaffolding for every additional height of 2.50m for the total height of 30.50m for every 1 metre run.

Supplying and fixing Granite Slab (Jet Black) of size 18mm to 20mm thick with super fine polished machine cut edges in partition of size 500 x 1200mm between the urinals in all floors laid over a Cement Mortar 1:3 (One of cement and three of M Sand) 20mm thick, fixing the slab with required cement slurry, laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments including labour charges etc., complete complying with standard specification. (The granite slab and other material should be got approved by Executive Engineer before use on work).

Painting New Iron work with two coats of best approved first quality and colour of Synthetic Enamel Paint over the existing red oxide priming coat in all floors etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on work).

Providing and applying Water Proofing Agent over the open terrace in duct roof surface by cleaning & preparing the surface using cement slurry with CEBEX100 at 225gm and applying water proofing compound of crystalline capillary water proof cement brush bond tag with three coats to the exposed surface. The rate including the cost of materials, labour charges and all other tools & plants engaged etc., complete and as directed by the SIDCO Engineers.

Paving the floor with concrete anti-skid Industrial Steps tiles of (Required shape and design)- 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the anti-skid Industrial tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing 230mm wide PVC EXPANSION JOINT in the 20mm expansion gap provided in between decks over piers and in between deck and dirt wall over abutment as shown in the drawing including cost and conveyance of expansion joints including shalimar pad and joint sealant etc., complete

Providing wall cladding with 20mm granite stone with best approved quality fine polished Granite Stone Slabs of black, jet black,Ruby red ,Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

LT METERING PANELS (Detailed Specifications is enclosed in Annexure I of tender documents and it will be included in the agreement) LT METERING PANEL-(1, 2, 3, 4,5,6,7,8,9,10) Incomer: 400 A TP+N FUSE 1 set - RYB LED type indicating lamps 1 set - Control MCB with Neutral link. Bus bar: 1 set - 400A, 36kA, 415V, TPN Copper busbars, interconnections with colour coded heat shrinkable sleeves and SMC Busbar supports. Outgoings: 63A TPN FUSE - 11Nos 63A TPN 36kA MCCB with ON,OFF,TRIP - 11Nos METERING : 40-60A KWHR - 11Nos(Space provision for EB Meter)

LT METERING PANEL-(11, 12, 13, 14,15,16,17,18) Incomer: 400 A TP+N FUSE 1 set - RYB LED type indicating lamps 1 set - Control MCB with Neutral link. Bus bar: 1 set - 400A, 36kA, 415V, TPN Copper busbars, interconnections with colour coded heat shrinkable sleeves and SMC Busbar supports. Outgoings: 63A TPN FUSE - 11Nos 63A TPN 36kA MCCB with ON,OFF,TRIP - 11Nos METERING : 40-60A KWHR - 11Nos(Space provision for EB Meter)

LT METERING PANEL-19 CT Metering Panel supply of CT metering panel for 3 comporment panel type ( indoor ) copper busbar 25 x 10 tpn hylam sheet, 6mm 500 x 500 - 2 nos test terminal block riesin type current transformer 200 /5 class - 0.5 - 3 nos 40 x 10 bolt nut drill bit - 5 mm wire 2.5 sqmm, r-y-b -n each 12 mtrs 2.5 sqmm pin lugs - 30 nos 2.5 sqmm ring lugs - 30 nos, 4 sqmm pin lugs - 20 nos metering glass 40 mm insulator.

UTILITY PANEL Incomer: 2Nos. 400A,4P MCCB 36kA with E / M interlock (motorised MCCB). Metering for Incomer: 2 No. Multifunction meter (KWH+KW+A+V+F+MD with RS - 485 port, MODBUS)(96 x 96mm size) 2set - 400A ,5VA, CL 0.5, CT's for metering. 2 set - RYB LED type indicating lamps. 2 set - Control MCB with Neutral link. 2 set-ON,OFF,TRIP Bus bar:1 set - 400A, 4Wire, 36kA, 415V, TPN Copper busbars, interconnections with colour coded heat shrinkable sleeves and SMC Busbar supports. Outgoings: 2Nos. 125A TPN MCCB 36kA with ON,OFF,TRIP 2Nos. 100A TPN MCCB 36kA with ON,OFF,TRIP 6Nos. 63A TPN MCCB 36kA with ON,OFF,TRIP 1Nos. 32A TPN MCCB 36kA with ON,OFF,TRIP

COMMON LIGHTING PANEL Incomer: 1 Nos. 100A,TPN MCCB 36kA Metering for Incomer: 1 No. Multifunction meter (KWH+KW+A+V+F+MD with RS - 485 port, MODBUS)(96 x 96mm size) 1 set - 100A ,5VA, CL 0.5, CT's for metering. 1 set - RYB LED type indicating lamps. 1 set - Control MCB with Neutral link. 1 set - ON,OFF,TRIP Bus bar: 1 set - 100A, 4Wire, 36KA, 415V, TPN Copper busbars, interconnections with colour coded heat shrinkable sleeves and SMC Busbar supports. Outgoings: 20 Nos-40A TPN MCCB 36kA with ON,OFF,TRIP

COMMON POWER PANEL Incomer: 1 Nos. 100A,TPN MCCB 36kA Metering for Incomer: 1 No. Multifunction meter (KWH+KW+A+V+F+MD with RS - 485 port, MODBUS)(96 x 96mm size) 1 set - 100A ,5VA, CL 0.5, CT's for metering. 1 set - RYB LED type indicating lamps. 1 set - Control MCB with Neutral link. 1 set - ON,OFF,TRIP Bus bar: 1 set - 100A, 4Wire, 36KA, 415V, TPN Copper busbars, interconnections with colour coded heat shrinkable sleeves and SMC Busbar supports. Outgoings: 7 Nos-40A TPN MCCB 36kA with ON,OFF,TRIP 5 Nos - 40A DB MCB 10kA

LIFT PANEL Incomer: 1Nos. 125A,TPN MCCB 36kA Metering for Incomer: 1No. Multifunction meter (KWH+KW+A+V+F+MD with RS - 485 port, MODBUS)(96 x 96mm size) 1set - 125A ,5VA, CL 0.5, CT's for metering. 1set - RYB LED type indicating lamps. 1 set - Control MCB with Neutral link. 1 set-ON,OFF,TRIP Bus bar: 1 set - 125A, 4Wire, 36kA, 415V, TPN copper busbars, interconnections with colour coded heat shrinkable sleeves and SMC Busbar supports. Outgoings: 5Nos. 63A TPN MCCB 36kA with ON,OFF,TRIP

EMERGENCY UPS OUTGOING PANEL Incomer: 1 No. 32A,TP+2N MCCB 36kA Metering for Incomer: 1 No. Multifunction meter (KWH+KW+A+V+F+MD with RS - 485 port, MODBUS)(96 x 96mm size) 1 set - 32A ,5VA, CL 0.5, CT's for metering. 1 set - RYB LED type indicating lamps. 1 set - Control MCB with Neutral link. 1 set-ON,OFF,TRIP Bus bar: 1 set - 32A, 4Wire, 36KA, 415V, TP+2N Copper busbars, interconnections with colour coded heat shrinkable sleeves and SMC Busbar supports. Outgoings: 4 Nos. 25A TP+2N MCCB 36kA with ON,OFF,TRIP

400 A TPN FSU With Fuse Enclosure box for EB

DISTRIBUTION BOARDS Supply, installation, testing & Commissioning of the following Floor DB's to achieve the IK rating of 09 and all as per IEC61439-1&3, double door construction, powder coated with approved shade and partitions to segregate phases, 7segment if three phase incomer DB. Approved lockable covers with padlocking arrangement for each phase, recessed in wall or surface mounted with angle iron frame. All DBs shall have double type of the following description:

LIGHTING AND POWER DISTRIBUTION BOARD Supply and fixing of 7 segment 4 way 40A TPN MCB sheet steel distribution board (Higher end) with metal door cover surface type fitted with busbars and neutral links with sub incomer and single phase MCB outgoings . Seperate 4 way provision for accomodating one no. 4 pole incoming MCB and another seperate 4 way provision for accomodating one no. 4 pole RCCB/ELCB (totally 8 ways in one segment) SubIncomer: seperate provision for MCB / Isolators/RCCB/ELCB for sub incomers in 3 segments Outgoings: 3 x 4 ways in each segment, provision for MCB (totally 12 nos.) with lable holder and provison for taking up cable with the following on wall with earth connection. Incomer: 1No.Four Pole 40A 10kA MCB Sub Incomer : 3 Nos. 40A, 30mA, Double Pole RCCB/ELCB Outgoing : 12 Nos. Single Pole 6A to 32A,10kA MCB

LIGHTING AND POWER DISTRIBUTION BOARD Supply and fixing of 7 segment 6 way 40A TPN MCB sheet steel distribution board (Higher end) with metal door cover surface type fitted with busbars and neutral links with sub incomer and single phase MCB outgoings . Seperate 6 way provision for accomodating one no. 4 pole incoming MCB and another seperate 4 way provision for accomodating one no. 4 pole RCCB/ELCB (totally 8 ways in one segment) SubIncomer: seperate provision for MCB / Isolators/RCCB/ELCB for sub incomers in 3 segments Outgoings: 3 x 6 ways in each segment, provision for MCB (totally 18 nos.) with lable holder and provison for taking up cable with the following on wall with earth connection. Incomer: 1No.Four Pole 40A 10kA MCB Sub Incomer : 3 Nos. 40A, 30mA, Double Pole RCCB/ELCB Outgoing : 18 Nos. Single Pole 6A to 32A,10kA MCB

EMERG. LIGHTING DISTRIBUTION BOARD Supply and fixing of 7 segment 6 way 40A TPN MCB sheet steel distribution board (Higher end) with metal door cover surface type fitted with busbars and neutral links with sub incomer and single phase MCB outgoings . Seperate 6 way provision for accomodating one no. 4 pole incoming MCB and another seperate 4 way provision for accomodating one no. 4 pole RCCB/ELCB (totally 8 ways in one segment) SubIncomer: seperate provision for MCB / Isolators/RCCB/ELCB for sub incomers in 3 segments Outgoings: 3 x 6 ways in each segment, provision for MCB (totally 18 nos.) with lable holder and provison for taking up cable with the following on wall with earth connection. Incomer: 1No.Four Pole 25A 10kA MCB Sub Incomer : 3 Nos. 25A, 30mA, Double Pole RCCB/ELCB Outgoing : 18 Nos. Single Pole 6A to 32A,10kA MCB

EXTRA LOW VOLTAGE DISTRIBUTION BOARD Supply and fixing of 7 segment 4 way 40A TPN MCB sheet steel distribution board (Higher end) with metal door cover surface type fitted with busbars and neutral links with sub incomer and single phase MCB outgoings . Seperate 4 way provision for accomodating one no. 4 pole incoming MCB and another seperate 4 way provision for accomodating one no. 4 pole RCCB/ELCB (totally 8 ways in one segment) SubIncomer: seperate provision for MCB / Isolators/RCCB/ELCB for sub incomers in 3 segments Outgoings: 3 x 4 ways in each segment, provision for MCB (totally 18 nos.) with lable holder and provison for taking up cable with the following on wall with earth connection. Incomer: 1No.Four Pole 25A 10kA MCB Sub Incomer : 3 Nos. 25A, 30mA, Double Pole RCCB/ELCB Outgoing : 12 Nos. Single Pole 6A to 32A,10kA MCB

DB FOR MODULES - SMALL SHOP Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with wall with earth connection only. Higher End following : 8 way VTPN DB Incomer: 1No. 40A FP MCB 1 No. 40A, 100mA, FP RCCB/ELCB Outgoing : 4 Nos. 32A, TP MCB 12 Nos. 6A to 32A, SP MCB

DB FOR MODULES - BIG SHOP Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with wall with earth connection only. Higher End following : 8 way VTPN DB Incomer: 1No. 63A FP MCB 1 No. 63A, 100mA, FP RCCB/ELCB Outgoing : 4 Nos. 40A, TP MCB 12 Nos. 20A to 32A, SP MCB

PHE DB Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with wall with earth connection only. Higher End 8 way VTPN DB Incoming-63A 4P 10kA MCB - 1 No. 1 No. 63A, 100mA, FP RCCB/ELCB Outgoing:6A to 32A TP MCB - 6No`s 6A to 32A SP MCB - 6No`s

LIFT DB Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) on wall with earth connection only. (Higher End) 4 way VTPN MCB DB Incoming- 1No Four Pole 63A,10kA MCB, 1No Four Pole 63A 100mA RCCB/ELCB, Outgoing: 2Nos Triple Pole 32A,10kA MCB, 6Nos Single Pole 6A to 32A,10kA MCB.

Supply and fixing of 4P 32A MCB in suitable sheet steel enclosure with connected complete accessories.

Design, manufacture,warranty, transportation, supply, erection, testing and commissioning and integration of 10kVA size Conventional UPS with isloation transformer, Uninterrupted Power Supply (UPS), NUMERIC – HPI 10KVA (3Ph-3Ph) FMI(FLOOR MOUNTABLE WITH ISOLATION TRANSFORMER ) 240VDC Online Double Conversion UPS System & MS rack for housing the batteries along with interconnection cable & SNMP card. with 2yrs warrenty

Design, manufacture, transportation, supply, erection, testing and commissioning of Sealed Maintenance Free (VRLA) Battery Bank for15 kVA Uninterrupted Power Supply (UPS) 12V - 150Ah - 20 Nos Battery for 90 minutes Back up with 2 yrs warrenty

DIESEL GENERATOR SET: (200 kVA) (Detailed Specifications is enclosed in Annexure I of tender documents and it will be included in the agreement) Supply, installation, testing & commissioning of 200 KVA with AMF panel 3 phase, 415V (Prime & Standby) Silent (Acoustic proof) diesel generating set wit local isolating control with adapter box suitable for terminating Al / Cu. armoured XLPE cable. along with Auto Controller, day oil fuel tank DG set including vibration mounts, base frame, 2 set of hardware Batteries, Engine control panel with accessories first fill of lube oil residential silencer, flexible connection bellow / expansion joints, etc.. complete and with all associated equipment / work as per specifications.

6"mm dia MS Exhaust pipe complete with insulation as above, flange, hardware with suitable bends painting in approved color. The scope of works also include 2" thick Thermal insulation with Aluminium cladding

MS support for exhaust pipe, residential silencer and miscellaneous supports and frames etc

Supply and clamping of 4C x240 sq.mm. XLPE LTUG Al armoured cable on post /on wall/Tray with MS clamps

Supply and Laying of 4C x 240 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3.5C x95 sq.mm. XLPE LTUG Al armoured cable on post /on wall/Tray with MS clamps

Supply and clamping of 3.5C x50 sq.mm. XLPE LTUG Al armoured cable on post /on wall/Tray with MS clamps

Supply and clamping of 4x25 sq.mm. XLPE LTUG Al armoured cable on post /on wall/Tray with MS clamp

Supply and clamping of 4x16 sq.mm.XLPE LTUG Al armoured cable on post /on wall/Tray with MS clamps

Supply and clamping of 2Cx16 sq.mm. XLPE LTUG Al armoured cable on post /on wall/Tray with MS clamps

Supply and clamping of 4C x 6 sq.mm PVC Cu. Flexible cable on post /on wall/Tray with MS clamp

Supply and clamping of 1C x 6 sq.mm PVC Cu. Flexible cable

Supply and clamping of 3x2.5 sq.mm. XLPE LTUG Cu armoured cable on post /on wall/Tray with MS clamps

Supply and clamping of 3x1.5 sq.mm. XLPE LTUG Cu armoured cable on post /on wall/Tray with MS clamps

Supply and fixing of brass cable gland with termination for 4CX240sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland with termination for 3.5CX70sq.mm. XLPE armoured LTUG cable with earth connection

Supply and fixing of brass cable gland with termination for 3.5CX50sq.mm. XLPE armoured LTUG cable with earth connection

Supply and fixing of brass cable gland with termination for 4CX25sq.mm. XLPE armoured LTUG cable with earth connection

Supply and fixing of brass cable gland with termination for 4CX16sq.mm. XLPE armoured LTUG cable with earth connection

Supply and fixing of brass cable gland with termination for 2CX16sq.mm. XLPE armoured LTUG cable with earth connection

Earth pit excavation, electrode installation with common salt/ char coal/ bentonite for chemical earthing ( to achieve the required earth resistance value), inspection chamber with removable CI / RCC covers inclusive of all civil works. The distance between two earth electrodes should be 3000mm. While measuring the earth resistance, it should be possible to easily disconnect the bolts with hand tools. Earth pits permanent identification marks are to be provided both inside and out side. Dedicated earth pits electrodes connecting insulated conductors should be run UG conduits. All the welded joints should be coated with bitumen to avoid rusting. All the fasteners required like PVC pipes, bolts,nuts, locking serrated/ flat/spring washers are included in the scope. The vendor shall include the cost for equipment to earth pit with necessary civil works(Were as required). Supply and fixing of Copper Plate Earth Electrode – Copper Plate 600 X 600 X 3 mm Thick, Hot Dip Galvanized Pipe 40 mm NB 48 mm OD 3 Mtrs long, 25 X 3 mm Copper Strip 2 Runs ( 2850 mm ) suitable bolt, nut, washer ( SS ), Copper Clamp, Funnel ( with Assemble ) with Salt and Charcoal 50 Kg Each, 0.45 m X 0.45 m X 0.6 m Manhole Cover For DG Neutral earthing

HDGI Plate Earth Electrode – HDGI 600 X 600 X 6 mm Thick, Hot Dip Galvanized Pipe 40 mm NB 48 mm OD 3 Mtrs long, 25 X 3 mm HDGI Strip 2 Runs ( 2850 mm ) suitable bolt, nut, washer ( SS ), HDGI Clamp, Funnel ( with Assemble ) Salt and Charcoal 50 Kg Each, 0.45 m X 0.45 m X 0.6 m Manhole Cover

Supplying and laying 8 SWG Hard drawn CU wire including connection/ termination etc. as required.

Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth connection

Supply and run of 50mm x 6mm copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and run of 25mm x 6mm copper flat with necessary clamps / supports on wall / floor / ground for earth connection

1C 6Sq.mm Cu Flexible Cable (Green colour) with terminations on both the ends

Supply and fixing of Profile design Cable Ladder with horizontal & vertical bends, reducers, Tee's,Cross over, supports, brackets and other accessories as required confirming to IS/ IEC-61537.The cable Ladder shall be Pregalvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The cable ladder should be tested for safe working load with a span distance of 2.4 Mtr and the deflection should be within the limits as per the NEMA standard. The cable ladder shall be supplied in standard length of 2500 mm. The rung size shall be of 35x15mmm size & the space between the rungs shall be 300mm. The ladder trays shall include necessary Couplers.

750 x 100mm x height x 2mm thick Ladder tray

600 x 100mm height x 2mm thick Ladder tray

450 x 75mm height x 1.6mm thick Ladder tray

300 x 75mm height x 1.6mm Ladder tray

Supply and fixing of Profile design Perforated Cable tray with horizontal & vertical bends, reducers, Tee's, cross over , suitable supports and brackets and other accessories as required confirming to IS/IEC-61537. The Tray shall be galvanized for corrosion protection as per ISO 1461.The trays should be tested for a safe working load as per the standard with a span distance of 1.5 meters.The tray shall be supplied with the standard length of 3000 mm. The trays should have special hole for precise mounting & round hole for fixing supports at regular intervals .The trays shall include necessary couplers.

450mm wide x 75mm height x 1.6mm Perforated tray

300mm wide x 75mm height x 1.6mm Perforated tray

200mm wide x 50mm height x 1.6mm Perforated tray

100mm wide x 50mm height x 1.6mm Perforated tray

Supply and fixing of 1 no.6/16 A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Lower End

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gauge MS coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Lower End

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)

Supply & Installation Of 3 star 1.5 TR split type Air-Conditioner with 4 KVA capacity Automatic Voltage Stabilizer with time delay relay and with MS stand for fixing outdoor unit.

Supply and laying of 3/8" or 5/8" copper pipe (Extra beyond 3 metres supplied with AC unit)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 14SWG TC wire for Open MS conduit Light point ( 5 points / Coil) Lower End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open MS conduit Fan point with 2 Module fan step regulator( 5 points / Coil) Lower End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open MS conduit Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 Sq.mm. wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End

Power Wiring with 3R x 2.5 sq.mm. PVC insulated single core unsheathed copper conductor cable of 1100V grade on 25mm dia MS conduit on wall and ceiling / floor with MS accessories for lighting circuits.

Supply and fixing of 4' 18W to 20W LED Tube in suitable general purpose fitting with connection complete

Supply, fixing of 10W LED Aviation Light luminaires made of Die-cast aluminum housing with Red polycarbonate dome for better illumination, Integral driver, 302Nos.x 5mm LEDs incorporated, Ingress Protection : IP65, life of LED 50000 burning hours with surge protection and protection against short circuit

Supply, fixing of 10W LED Bulkhead Luminaire, Luminaire shall meet IP66 and IK09 protection with connection complete

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre required size of wall bracket GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Supply, fixing of surface LED downlighter compatible with system wattage not more than 12W and luminaire lumens not less than 1200 lumens with connection complete

Supply, fixing of LED highbay symmetric narrow beam luminaire with housing made of die-cast aluminium & rugged polycarbonate cover of system wattage consisting of 70W. The luminaire shall be with dedicated optics to provide precise light distribution of symmetric narrow beam angle (60 deg beam). The luminaire shall be designed to meet its specifications on performance & lifetime at a design ambient temperature of 45 deg C and operating temperature range 0-50° C. A specially designed heat management system to ensure luminous efficacy >=142 lm/ W for the system and ensure lumen depreciation upto 30% over 50k burning hours. The luminaire is designed to meet IP 65 and IK 08 classification and is compliant with relevant immunity, safety and performance and EMI standards. The system lumens shall not be less than 10000 lumens with 5700K CCT. The CRI shall be > 70. The luminaire shall be able operate from 120 - 270V AC, 50Hz with > 0.95 PF & THD <=10%. The LEDs shall be of SMD type (not COB type). The luminaire supplier shall submit the LM79 and LM80 report of the luminaire from the approved NABL accredited laboratory. The luminaire shall be with inbuilt surge protection of 4kV.

Supply & Installation of rubber mats as per CEIG requirement's (As per CEIG norms/panel dimensions length and width to be provided)(2x1)meter - 5 Nos

Supply & Installation of shock treatment chart in English and Local language. Shock treatment chart to be printed & framed with glass front size 300 x 600.

Supply & Installation of first aid kit with wall mounting iron stand.

Design, Supply, Testing at works, Transportation to site, Erection, Testing at site, and commissioning of the following LT Kiosk suitable for 415 Volts, 3 Phase, 4 wire system, fabricated from 14 SWG CRCA sheet steel enclosure, single fronted, free standing, front hinged, rear removable, extendable on both sides, dust & vermin proof, cubicle type, floor mounted, undrilled gland plates at top/bottom, the panel board bottom of height should be minimum 600mm from FFL. complete with internal wiring, '400A 4P MCCB Type Isolator with Outdoor type IP-65 Weather proof Enclosure

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 20 persons capacity passenger lift as per the following specifications.(Gearless lift without machine room) (Detailed Specifications is enclosed in Annexure I of Tender Documents and it will be Included in the Agreement)

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of Goods Lift (2500 Kgs) as per the following specifications (Machine room less) (Detailed Specifications is enclosed in Annexure I of Tender Documents and it will be Included in the Agreement)

TERRACE BOOSTER PUMP Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point to make 30 m water jet at the time of fire fighting emergency cicumstances, coupled with 11 KW / 15 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia.delivery size of 65 mm dia., including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 1555+ or Equivalent)

Supply, installation, testing and commissioning of CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING 100 NB

Manufacture, Supply and Delivery of DI D/F Slanted seat Swing Check Valve ( DI Non return valve). Body of ductile cast iron of Grade GGG 40 or equivalent grade and disc of ductile cast iron GGG 40 or equivalent grade with fully encapsulated EPDM rubber, where both faces can be used.Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270. (EP-P) it is a resi-coat powder approved for drinking water application, applied through fusion bonding process by dipping the shot-blasted casted components heated up to 200 deg C). Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538 80 NB

Supplying,installation,testing and commissioning of G.M GATE VALVES AS PER IS BS 5154 and related IS Specifications as per with factory finish necessary flanges, Hot Dip GI nut, bolts & washers, painting, etc. Complete as per the technical specification. 50 NB

Supply and installation of Cast Iron Y strainer (PN 10) with necessary flanges,gaskets,GI bolts,nut & washers with all complete. 100 NB

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the SIDCO Officers. Make: JINDAL / EQUIVALENT. (Detailed Specifications is enclosed in Annexure I of tender documents and it will be included in the agreement) 150 NB - 5.4 mm Thick - Class C

100 NB - 5.4 mm Thick - Class C

80 NB - Class C

50 NB - Class C

25 NB - Class C

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the SIDCO Officers.

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the SIDCO Officers. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the SIDCO Officers.

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the SIDCO Officers.

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the SIDCO Officers.

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary., etc., complete as per standard specification and as directed by the SIDCO Officers.

Supply, erection, testing and commissioning of Fire Fighting 4 Way Fire Brigade Inlet with necessary gun metal 63mm dia non return spring shutter arrangements, so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the SIDCO Officers.

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., complete as per standard specification and as directed by the SIDCO Officers. Make: KARTAR /EQUIVALENT.

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the SIDCO Officers. Make: H-GURU / ISI MAKE /EQUIVALENT.

Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers.

Supply and fixing of advanced model multi purpose ABC stored pressure type fire extinguisher, as per International Standard and specifications (IS:15683), Ready to use condition. ISI Marked, Capacity:6 kgs, complete as per standard specification and as directed by the SIDCO Officers. (Five years warranty)

Supply and fixing of CO2 type fire extinguisher, as per International Standard and specifications (IS:15683), Ready to use condition. ISI Marked, Capacity: 4.5 kgs, complete as per standard specification and as directed by the SIDCO Officers. (Five years warranty)

Supply, Erection, testing and commissioning of Analogue addressable micro Process - controlled Fire Alarm Control Panels with interfacing box, capable of being to the central monitoring System, to monitor and integrated the following quantity of accessories like detectors, MCP's/hooters/control modules, Fault Isolation Modules, hooters, response indicators, fire/fault indicators, audio-visual signals, central processing units, Fire Brigade Phone, complete with LCD display, zone indicating LEDs as per the detailed specification: complete with Battery backup for 48 hours in standby mode and 30 minutes in alarm condition. The system should be capable of detecting fire within 3secs as per UL 9th edition/FM/EN-54 approval with charger for each panel. Each loop should provide with minimum 250 detectors/ devices. Fire panel should be RS-485 communication port and integrate with other Fire panel and Repeater Panel Make: HONEYWELL / EQUIVALENT. 8 Loop Panel

Supply, Erection, testing and commissioning of Addressable analogue type Multisensory type smoke detectors with dual chamber, solid state design, indicating LED, mounting base, gland and MS base box(Red Colour) etc. as per detailed specification.Make: HONEYWELL / EQUIVALENT.

Supply, Erection, testing and commissioning of Hooter and strobe light with minimum 85 db audible and 3m for Audible annunciation and 75cd -110cd flashing at 1 Hz for visual indication.complete and as per technical specification. Make: HONEYWELL / EQUIVALENT.

Supply, Erection, testing and commissioning of control module for Hooter as per Tender specification Make: HONEYWELL / EQUIVALENT.

Supply, Erection, testing and commissioning of Hooter Power supply unit It shall be provided with all suitable mounting accessoreis for as per floor hooter counts.Make: HONEYWELL / EQUIVALENT.

Supply, Erection, testing and commissioning of Manual call points pull stations with double action type of approved make with NO/NC contacts slim type and projecting out from the surface of enclosure with glass suitable for addressable function(Resettable Type) with inbuilt module Make: HONEYWELL / EQUIVALENT.

Supply, Erection, testing and commissioning of Fault isolation module to electrically isolate different sections of detector loops with necessary back box Make: HONEYWELL / EQUIVALENT.

Supply, Erection, testing and commissioning of Fault isolation module to electrically isolate different sections of detector loops with necessary back box Make: HONEYWELL / EQUIVALENT.

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (RED colour)

Floor indentification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 150x600 - NONGLO

Providing the signage of " Fire Extinguisher " to be pasted above the every extinguisher. - NONGLO - Size shall be 175x250

Providing the signage of " Manual call point " to be pasted near the Manual call points. - NONGLO -Size shall be 175x250

Providing the signage of " Fire Hydrant & Hose Reel " to be pasted on doorof the every fire shaft at all floors. - NONGLO -Size shall be 150x200

Providing the signage of emergency Assembly Point Sign Board with MS Stand- A2(420X594)

Providing the sign boad of " EXIT SIGN RIGHT SIDE/ LEFT SIDE DIRECTION " with arraow to be placed at walking pathways by hanging on ceiling to direct occupants to outside the building in an emergency. The exit sign board will be auto glow photoluminiscent) type which will glow at dark. - AUTOGLO -Size shall be 150x600

Providing the sign boad of " EXIT SIGN DOUBLE SIDE DIRECTION " with arraow to be placed at walking pathways by hanging on ceiling to direct occupants to outside the building in an emergency. The exit sign board will be auto glow photoluminiscent) type which will glow at dark. - AUTOGLO-Size shall be 150x600

Providing the sign boad of " FIRE EXIT SIGN" with arraow to be placed at staircases by hanging on ceiling to direct occupants to outside the building in an emergency. The exit sign board will be auto glow photoluminiscent) type which will glow at dark. - AUTOGLO --Size shall be 150x600

PRIYA ENGINEERING PROJECTS PRIVATE LIMITED

P MANICKAM AND CO