Supply of Machinery/Tools for various Parks at Pul Pehladpur Ward No. 179 in Central Zone

Brush Cutter Engine: SINGLE CYLINDER, 2 STROKE, AIRCOOLED ONLY ENGINE DISPLACEMENT: 40.2CC Power Output: 2Kw/2.7HP Max Output shaft speed at cutting attachment: Should be minimum 9000 RPM CARBURETOR: Diaphragm with compensator technology. Fuel Tank Capacity: Minimum 600 ml. WEIGHT( Dry,without cutting attachment & deflector): Should not be more than 7.5 Kg CLUTCH: Centrifugal Type, Clutch Shoe Support base & lining Metal Only. MULTI FUNCTION HANDLE: Should have Acceleration ,ON/off Switch at right handle. BRUSHCUTTER HARNESS: Should be double shoulder harness only. ANTI VIBRATION SYSTEM: Must have 4- point aniti vibration system. Vibration Level in m/s2 at right handle : Should not be more than 2.5 m/s2 Sound Pressure Level Db(A): Should not be more than 105 dB(A) Drive shaft design: Must have drive shaft ends square design type only. Certification : Must have valid EN Certificaton

Petrol Operated Pole Prunner Engine : Single Cylinder, 2 Stroke, Air cooled Only Displacement: Should be between 25-30 CC POWER OUTPUT : Should be minimum 1.2 HP Weight (Dry without cutting attachment & fuel ): Should not be more than 7.5 Kg Fuel tank capacity (ml): Should be minimum 400ml Chain oil capcity (ml): Must have minimum 200 ml. Clutch : Clutch shoe linining should be metal only. Guide bar length : Minimum 30cm Guide bar And Chain : Should have same manufacture only . Chain Type : Every drive link need groove & small oil holes for better Lubrication. Saw chain pitch should be 1/4" OR 3/8Picco only and drive link thickness must have 1.1 mm or 1,3 mm. Max.output shaft speed (RPM): Should be minimum 8000 RPM at chain sprocket. Equipment total Length with guide bar and chain ( cm ) : Should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - Extended. Sound Pressure Level (Db/A): Should not be more than 95 Db(A) Vibration Measurement m/s2 at control handle - Extended Poistion : Should not be more than 5.5 m/s2 Certification : Must have TUV certification with test standard EN ISO 11680.

Hedge Trimmer Engine: 2- Stroke - Single Cylinder Air cooled. ENGINE DISPLACEMENT: Should be between 20-25 CC Power Output: Should be minimunm 1 HP FUEL TANK CAPACITY: Minimum 400 ml WEIGHT: Should not be more than 6.0 KG CLUTCH: Clutch Linning should be metal only. HANDLE: Must have Rotating multi-function handle ANTI VIBRATION SYSTEM: Must have spring loaded technology for Anti Vibration System Design: Should have Double sided blade with tooth spacing minimum 35mm Bar Length: Minimum 600 mm Blade: Should have Chrome Plated -Anti Corrsion. Stroke Rate ( l/min): Minimum 3000 Vibration Level m/s2 at Right Handle: Should not be more than 3.5 m/s2. Sound pressure level (dB..(A)): Should not be more than 95 Certification: Should have TUV with EN ISO 10517:2009

Lopper Anvil Tree Branch Lopper lade Material - High Carbon steel with Hard Surface Treatment, Overall Length - Not less than 914 mm Handle Material - Similar Materil as per requirement, Weight - 1.5 kg., Cutting Dia - Not Less Than 38mm