Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-Finance | L1 | Accepted-Finance Lowest and reasonable bid | |
| 2 | L2₹3.2 L+₹7,054.50 (2.24%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid |
Tender Value
₹5.8 L
EMD Value
₹11,560
Closing Date
18 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) SURANUSSI
MIL STN SURANUSSI
SPL REPAIR TO DSC GUARD POST NO 09 (SAINIK GATE) OF 223 ABOD AT SURANUSSI UNDER AGE(I) SURANUSSI
2024_MES_643340_1
AGE(I)S-34/2023-24
Open Tender
Civil Works
Item Rate
180 days
SURANUSSI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) SURANUSSI
₹11,560
Yes
30 Mar 2024
20 Feb 2024
25 Mar 2024
20 Feb 2024
18 Mar 2024
12 Mar 2024
Amount
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed
Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) and sunken portion complete all as specified and directed.
Dismantling wall and Ceiling boards any thickness, including cover fillets complete all as specified and as directed
Dismantling, mild steel work of any description not otherwise provided for
Dismantling posts or struts (wood, steel or R.C.C.) Posts embedded in Concrete, brick work, masonry, etc any section, including taking out embedded portion and making good complete all as specified and as directed
Dismantling plain or corrugated asbestos sheet in roof covering including ridges complete all as specified and as directed.
Supply & fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with J type hooks complete all as specified and as directed.
Supply & fixing pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with J type hooks complete all as specified and as directed
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.
Taking down chowkhats or frames exceeding 1.5 sqm and not exc 4 Sqm each (without taking off shutters form the frames) and removing from site complete all as specified and directed.
All as per ser item No 10.00 above but area exc 1.50 Sqm but n.exc 4.00 Sqm
Material and Labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and as directed
Material and labour for 15mm thick in cement mortar 1:6 on brick work or concrete surface finished even and smooth without using extra cement complete all specified and directed
Material and labour for 15mm thick in cement mortar 1:4 on fair faces of brick/concrete work finished even & smooth without using extra cement complete all as specified and directed.
Material and labour for preparing new surfaces of walls and applying two coats oil bound distemper over a coat of primer complete all as specified.
Material and labour for preparing new surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified.
Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in benching to drains coping, Hold fast, roof kerbs or mud stops, rounded or chamfered on edges of wheel track including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material and labour for 20-25 mm thick machine cut kota stone slab 550mm x 550mm of minimum size flooring over and incl 20mm thick screed bed in cement mortar 1:4, roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust including brushing neat cement slurry @ 3 kg/sqm with pigments to match the shade of slab including cutting, rubbing and mirror / granite finish polishing complete all as specified and directed.
Material and Labour for Non skid coloured ceramic tiles (premium quality) 7 to 8mm thick square/ rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 20mm thick cement screed bed in cement mortar 1:4 complete all as specified and directed.
Material and Labour for Glazed ceramic coloured tiles of premium quality of size 450mmx300mmx7mm thick as on vertical surfaces such as dado/skirting etc laid over and including 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointing in white cement with pigment to match, complete all as specified and directed.
Material and labour for 25mm thick cement concrete 1:2:4 type B-0 using 12.50mm graded stone aggregate as in flooring finished even and fair to receive the top layer complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6 type C-2 graded stone aggregate as in flooring, plinth protection, pavements, path finishing, the surface even and smooth without using extra cement complete all as specified.
Material and labour for 12mm thick perforated particle boards tiles for insulation and acoustics purpose 60cm x 60cm in size fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed.
Material and labour for GI powder coated snap grid frame work for false ceiling, size of grid 605mm x 605mm complete size of members as specified in Para 10.38 of SSR 2009 (Part-I) including suspenders of 6 mm GI wire for fastening of frame work @ 1.20m c/c in either direction complete all as specified.
Supply fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165)
Material and labour for 35 mm thick IInd class HW , factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
Supply and fixing 35mm thick 2nd class hard wood glazed or skeleton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitred beads for securing glass etc size of member all as per clause 8.24 Para (a) of Section 8, SSR-2009 (Part-I), complete all as specified and directed.
Supply and fixing framed work as Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. also fastening conforming to GdeFe 290 (Gde E-165)
Suppy and fixing PVC solid door frame of size 50mmx47mm with a wall thickness of 5mm made out of extruded 5mm thick rigid PVC foam sheet, mitre cut at two corners and joined with two Nos of 150mm long brackets of 15mmx15mm MS square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm MS square tube of 19 gauge, EPDM rubber gasket, and weather seal to be provided through out the frame. The doorframe shall be fixed to the wall using 65/100mm long MS screws through the frame using PVC fasteners. A minimum of four Nos of screws to be provided for each vertical member and minimum of two nos of screws for each horizontal member complete as per Manufacturer’s specification and drawing and as directed.
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site all as specified in clause 8.34.2.1 of SSR Part-I as directed.
Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed and skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf -01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note: Wire gauge/glass shall be measured and paid for separately.
All as per ser item No 32.00 above but with Gauged shutter
Supply and fixing Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Supply and fixing galvanized mild steel wire cloth 0.45 to 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks, complete all as specified and as directed.
Supply and fixing helical door spring 300mm size with steel roller and roller plate complete all as specified and directed.
Supply and fixing 300mm long mild steel sliding door bolt with bolt stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate complete, all as specified and directed.
Supply and fixing mild steel barrel tower bolts 200mm long stove enameled black with bright bolt and fixed, complete all as specified and directed.
Supply and fixing mild steel pressed handles oval type, stove enameled black 150 mm size, complete all as specified and directed.
Supply and fixing mild steel cold rolled butt hinges medium weight of 100 mm size zinc chrome complete all as specified.
Preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material and labour for preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
Supply and fixing in replacement 20 mm dia harrison rails mild steel with decorative finish , with fixing brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM)
Supplying and fixing Rotational moulded polythene water storage tank 500 litre capacity (Cylindrical vertical with closed top) hoisted in position including dismantling of existing tanks, complete all as specified and directed incl PVC float valve 20mm size specified in SSR Pt-1
Taking down GI tubing and connections with all fittings 15 mm bore
All as per ser item 46.00 above but 20mm bore
Supply & fixing 15mm dia bore GI tubing, galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, including cutting through walls floors etc.
Supply & fixing 20mm dia bore GI tubing, galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reducer etc and fixed to wall, ceiling or laid in floor with new fittings, including cutting through walls floors etc.
Supply and fixing PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Supply and fixing in repair 15mm Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
Supply and fixing in repair 15mm size Stop valves, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
Supply and fixing in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.
Material and labour for preparing surfaces of old walls and applying one coats oil bound distemper.
Material and labour for preparation of old plastered surfaces of any description not otherwise described and applying two coats of cement base painting camouflaging pattern over a coat of primer on walls including preparation and cleaning the old surface etc complete all as specified and directed
Supply and fix in repairs for vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck) chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed.
Supply and fix in repairs PVC waste pipe of standard pattern not less than 75cm long 32 mm/40mm dia for WHB/steel sink waste coupling or suitable size complete all as directed.
Supply and fix in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified
Supply and fix in repairs 100 dia PTMT grating doom (min wt 25 gms) complete all as specified
Supply and fix in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , of size 580mm X 440mm complete all as specified.
Supply and fix in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve and handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed.
Material and labour for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 100mm thick as in sub base of flooring complete all as specified and directed.
Material and labour for 200X200X25mm thick chequered cement concrete tiles coloured with grey cement and pigment as in floor etc over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Material and labour for Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates as in, copings, finishing side to path, including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed by Engineer - in - Charge .
Taking down carefully copper/ aluminium point wiring (light/ fan/bell/ socket or power point) complete inclusive of all fittings such as switches, ceiling roses, pendants, regulators, sockets, fittings etc. removing materials from site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed.
Material and Labour for Concealed point wiring complete with 1.5 Sq.mm (nominal area) FR PVC insulated multi stranded copper conductor in and including heavy duty PVC conduit (wall thickness 1.6 mm) including fittings & accessories, with MS concealed terminal boxes with 3mm thick laminated bakelite ( Hylum/Anchor) sheet top cover for mounting switch, socket etc for one light/fan/bell point controlled by one switch and regulator with PVC cable copper conductor including 1.5 Sqmm solid copper conductor with green FR PVC insulation earth common earth dolly, complete all as specified.
All as per ser item 66.00 above but for 3 pin socket out let 5 Amps on same board complete all as specified and directed.
All as per ser item 66.00 above but for 3 pin socket out let 5 Amps on independent board complete all as specified and directed.
Supply and fixing switch piano flush type 5 Amp single pole one way complete all as specified and directed.
Supply and fixing socket outlet 5 pin 5 Amps flush type multi purpose complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing ceiling rose surface bakelite 65 x 50mm three terminals complete all as specified and directed.
Supply and Fixing fan regulator electronic step type and making connection all as specified and directed.
Supply and fixing ceiling fan complete with blade, down rod and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
Supply and fixing sheet steel enclosure with double door, detachable gland plates flush/surface mounting for MCB’s fitted with bus bar, earth bar and neutral link 4 ways SPN 240 V all as specified and directed.
Supply and fixing Isolator SPN 240V, 40 Amp all as specified and directed.
Supply and fixing Isolator SP 6 to 40 Amps 240 Volts all as specified and directed.
Material and Labour for earthing with galvanized iron earth plate electrode 600mm x 600mm, 6mm thick buried directly in ground vertically in a earth pit not less than 2.25mtr below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth wire 4mm dia by means of GI bolts, nuts, check nuts and washers (earth plate covered with alternate layers of charcoal dust and common salt 15cm thick), GI earth wire protected by GI pipe light grade 15 mm dia upto switch board and connected to main switch board including provision of GI pipe 20 mm dia light grade watering pipe with funnel and wire mesh, all as shown in Electrical Plate No. 3 of SSR Part-I, including PCC chamber (1:3:6) using 20mm graded stone aggregate and CI cover and frame including all necessary excavation and earth work and taking out old earthing complete all as specified and directed.
AAY KAY Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .