Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹12.9 L
EMD Value
₹25,738
Closing Date
1 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE, SVPND, APWD, Sri Vijaya Puram
EE, SVPND, APWD, Sri Vijaya Puram
Repair and renovation of Directorate of Industries Roofing sheet and minor repairs at Conference hall toilet of DOI at Industries Complex, Middle Point under SVPND, APWD, Sri Vijaya Puram
2026_APWD_25962_1
NIT No. 94/EE/SVPND/2026-27
Open Tender
Civil Works - Buildings
Percentage
90 days
Sri Vijaya Puram
Please refer tender documents
7 documents required · 7 mandatory
₹0
₹25,738
16 Nov 2026
16 Nov 2026
2 Dec 2026
16 Nov 2026
1 Dec 2026
18 Nov 2026
16 Nov 2026 - 30 Nov 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: | |||||
| 1.1 | Asbestos Cement sheet | 516.4 | sqm | 109.05 | ₹56,313.42 |
| 2 | Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand of Tata blue scope Steel/Everest Industries Limited, JSW Steel Limited, Jindal India Limited or or equivalent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.50%), total coated thickness with aluminium zinc coating 150 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws (Xylan) of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 516.4 | Sqm | 1,035.75 | ₹5,34,861.3 |
| 3Providing and fixing Pre-Painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Blue Scope stee, Everest industries Ltd, JSW Steel Ltd, Jindal Steel Ltd or equivalent make roofing accessories 0.50 mm (+0.50%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete | |||||
| 3.1 | Ridges Plain (500-600mm) | 112.4 | metre | 551.8 | ₹62,022.32 |
| 3.2 | Gutter (600mm over all girth) | 68.3 | metre | 1,331.2 | ₹90,920.96 |
| 4 | Extra for providing and fixing wind ties of 40x6mm flat aluminium section | 151 | metre | 260.7 | ₹39,365.7 |
| 5 | Providing and fixing in position eaves or facia board with 19mm thick WPC board of approved manufacturer and 30cm wide including nailing etc complete as per the direction of Engineer-in-charge. | 128.2 | metre | 1,036 | ₹1,32,815.2 |
| 6 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). | 184.7 | kg | 1,152.87 | ₹2,12,935.09 |
| 7 | Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer- in-charge. | 23 | each | 116.32 | ₹2,675.36 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.05 MB
TenderDocNIT94.pdf
Tender Documents • 1.18 MB
Instructions-to-bidders.pdf
Other Documents • 0.33 MB
BOQ_27493.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .