TTPS Operation Circle MPM II ACPRenewing the worn out motor pulley, V belt, pipe line, air duct painting the inner outer of the blower and commissioning the blower A B at air washer Unit -V model No.13 etc.,

Amount

Charges for transportation of the Taper lock pulley with bush of motor (pulley size 265 TLB bush 3535) from TTPS to workshop at town, enlarging the bore from pilot bore and also providing the keyway in the Taper lock bushes as per the sample, and return back to TTPS for fixing in the shaft of the Air washer blower motor A & B and renewing the 'V' belt of the blower & commissioning the blower A & B. (The rates including T&P hire charges,key & consumables etc.) [Pulley supply by the Board]

Contractor scope material ‘V' Belt size SPC 7500 [make: Pix/Fenner/ecodrive]

Charges for Fabrication the new air duct size (250mm X 500mm) 11 mtr length each Unit by 0.63mtr thick GI Sheet and renewing in the Unit IV & V 'O' mtr Feed pump shift operator room. (The rates including T&P hire charges & consumables etc.)

Contractor scope material 0.63 mm GI sheet [9.9 x 16.5 nos sheet = 163kg]

Charges for 1 No. Air grill fabrication by 1mm thick GI Sheet at workshop end and fixing in the newly erected of air duct of the Unit IV & V 'O' mtr Feed pump shift operator room. (The rates including material of GI sheet & consumables etc.)

Contractor scope material 1 mm thick GI sheet

Charges for fabrication and erection of 80/65 M.S. Pipe both inlet water line total length 45 mtr after dismantling the damaged existing pipe line and rerouting the pipeline including welding of flanges, fixing of bends etc., at water collecting tank of Unit V Air Washer and scrap materials are devoulted to stores as per the direction of Engineer-in-charge. (The rates including T & P hire charges, welding rods & consumables etc.)

Contractor scope material Ø65 mm Flanges

Contractor scope material Ø65 mm pipe

Contractor scope material Ø65 mm bend

Contractor scope material Ø65 mm Valve

Contractor scope material Float Valve with Adopter

Charges for 2 Coat of enamel painting of the centrifugal blowers A & B in Air washer system Unit IV and newly erected air duct and pipe line. (The rates including paints, consumables etc.)

MENAKA CONSTRUCTION ENGINEERS