REPAIRS TO JOINERY, FLOOR, PLINTH PROTECTION, PLUMBING AND SANITARY FITTINGS AND MISC B/R WKS AT ILP-II AND ALBERT EKKA ENCLAVE UNDER GE PANAGARH

Amount

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sq. m each complete all as specified and directed by Engineer-in-Charge

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq.m and n.exc 2 sq. m each complete all as specified and directed by Engineer-in-Charge

Taking down chowkhat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame ) each complete all as specified and directed

Taking down chowkhat or frame with shutters exe 1.50 Sqm and not 4 sqm (without taking of shutter from frame) each complete all as specified and directed

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed by Engr - in - Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification, drawing complete all as specified and directed by Engr-in-Charge.

M&L for chowkhat 2nd class hard wood and frames wrought , framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-In-Charge.

S&F 35mm thick 2nd class hardwood, factory made plain framed, panelled shutters (two panel), with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-In-Charge.

S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-In-Charge .

S&F 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed by Engr-In-Charge .

Supply and fix Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed. complete all as specified and directed.

All as per item No 11.00 mentioned here-in-above but with out glazing bars complete all as specified and directed.

M&L for framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Supply and Fix,steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed.

M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.

M&L for painting on new wooden based surfaces of any description not other wise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-In-Charge .

M&L for preparation of old painted of wood and wooden base materials surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No 17.00 mentioned here in above but on steel surfaces complete all as specified and directed

S&F butt hinges 100mm, medium weight, stainless steel all as specified and directed complete all as specified and directed

S&F butt hinges 100mm size medium weight mild steel cold rolled complete all as specified and directed

S&F butt hinges 75mm size medium weight mild steel cold rolled complete all as specified and directed

S&F 125mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed

S&F 100mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed

S&F 200mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S&F 150mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S&F mild steel sliding door bolts 300mm long, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and two on staple plate and fixed complete all as specified and directed by Engr-In-Charge .

S&F mild steel ordinary rat tail rod pattern spring 300mm including roller and roller plate on wooden/steel choukhat including welding, riveting etc complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down Shutters of any description exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F factory made wire gauzed PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of wire gauzed. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly as per specification ,drawing complete all as specified and directed by Engr-in-Charge. (Note : Hinges, Glass or wire cloth in panels shall be measured separately).

S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and directed.

S&F Powder coating Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F for Powder Coating Anodised aluminium door shutters (minimum thickness of powder coating 50 miron) aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

S&F for Anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No). hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed

M&L for pre-laminted 9mm thick particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber framework or fixed in ceiling complete all as specified and directed.

S&F in repairs, door closer aluminium body, hydraulically regulated, designation No.2, universal type, suitable for door shutters and weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F in repair brass mortice lock vertical type 100mm 4 lever fixed in aluminium door complete all as specified and directed.

S&F in repairs, floor door stopper over all length of cover plate 140mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and directed.

S&F 150 mm aluminium handle cast type, anodised, complete all as specified and directed

S&F150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F in repair 2nd class small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n.exc 200 cu. cm each all as specified and directed by Engr-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed

S&F for 3 mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .

S&F for 3mm thick plain fibre glass ordinary quality & glazing with adhesive n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-In-Charge .

S&F in repair stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed.

S&F 0.50 mm thick Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and jointed with silicon sealant metal adhesive as specified and as directed.

S&F PUF (Polyurethane Foam) insulated sandwich panels with suitably designed from structural design and safety point of view, sandwich panels in between galvanised steel sheet of 0.50mm thick prepainted both side (minimum) fixed to roof with nut bolt or screws and jointed with silicon selant metal adhesive all as specified and directed. (Note : Silicon sealant metal adhesive will be paid separately).

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Chajja, fixed with self tapping screws as specified and as directed.

Supply only silicon selant metal adhesive complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F mild steel as in post, trusses, purlin, crane rail and joist, channel angle or tee sections including all necessary cutting welding etc complete conforming to FE 410 W( Gde-E-250) quality A all as specified and directed.

S&F wind ties for roof including securing bolts, flat iron fillets(for securing weather boarding with screw bolts and nuts) including all necessary drilling or riveting etc and similar work conforming to Fe 410-O or Fe-310-O including painted with one soap coat of zinc cromate primer paint (including preparation of surfaces at contractor's workshop before fabrication) complete all as specified and directed

Dismantling wall and ceiling board of any description complete all as specified and directed.

S&F anodised aluminium snap grid frame work size of grid 605 x 605 mm for false ceiling complete all as specified and directed

S&F 6mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as specified and directed.

S&F hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness (above or below ground level) and removing rubbish off from site complete all as specified and directed.

M&L for providing 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in flooring complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in floor for levelling course complete all as specified and directed by Engineer-in-Charge.

M&L for 1st quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.06 sqm but n. exc 0.11 sqm of approved colour as in floors etc set and joined in neat cement slurry over and including 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic Coloured tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for 1st quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.11 sqm but n.exc 0.18 sqm of approved colour as in floors etc set and joined in neat cement slurry and pointed in white of coloured cement over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for 1st quality joints free non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.11 sqm but n.exc 0.18 sqm of approved colour as in skirting and set and joined in neat cement slurry and pointed in white of coloured cement to match over and including 10 mm thick in cement mortar (1:4) rendering complete all as specified and directed by Engineer-in-Charge

M&L for 10mm thick Vitrified Ceramic light shade tiles (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over and including 20mm cement screed base of CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed bed 10mm thick in cement mortar (1:4) and jointed with grey slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 300x300x 25mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving tc including the setting and jointing in neat cement paste and slurry 0.3 kg/Sqm over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth protection and path/paving complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. Complete all as specified and directed by Engr-in-Charge

Taking down rain water pipes (any size or pattern) , including all fittings and removal off the site complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.

All as per item No 78.00 mentioned here-in-above but 75 mm bore complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed

S&F in repair Drizzle Anti Cockroach trap 6x6 Inch Square Stainless steel with chrome finish/cockroach jali for kitchen/drain strainer for bathroom complete all as specified and directed

S&F in repairs water closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.

S&F Vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device all as specified and directed.

S&F in repairs 10 Litre capacity PVC valveless, syphonicaction type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge.

S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of for unions complete all as specified and directed.

S&F in repair PVC connection 15 mm size PTMT nuts of length length 600 mm complete all as specified and directed

Supply & fix vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specified and directed.

S&F Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia for wash basin and sink 01 mtr long complete all as specified and directed

S&F in repair soap dish vitreous china white size 160x160x90mm approx all as directed by Engineer -in-Charge

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern etc complete all as specified and directed

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms complete all as specified and directed

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) suitable urinal . (Minimum weight 32mm45gms/40mm-60 gms complete all as specified and directed

S&F CP tubular towel rail 20mm dia D type 60cm between two flanges complete all as specified and directed by Engineer -in-Charge.

Taking up or down 15mm dia bore steel tubing and connection including cleaning for refixing or remove to store complete all as specified and directed.

S& F 15 mm dia bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and directed.

All as per item No 101.00 mentioned here-in-above but fixing only complete all as specified and directed.

Taking up or down 20 mm dia bore steel tubing and connection including cleaning for refixing or remove to store complete all as specified and directed.

S& F GI 20 mm dia bore steel tubing medium grade galvanised with all fittings & connection complete all as specified and directed.

All as per item No 104.00 mentioned here-in-above but fixing only complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles and removing rubbish from site complete all as specified and directed

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete, all as specified and as directed.

M&L for brick work using old size bricks (except Bricks) straight or curved on plan exceeding 6.00 Meter mean radius, built in cement mortar (1:6) complete all as specified and directed

M&L for brick work with fly ash bricks straight or curve on plan to any radius in half bricks thick walls, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc incl raking out joints, hecking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed

M&L for rendering 15 mm thick with WPC on external surfaces of brick work in cement mortar (1:4) including finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured and paid separately)

Supply only Liquid water proofing compound complete all as specified and directed

M/S BHATTACHARJEE ENTERPRISE