Maintenance and up - keeping of Polling booths for 19-Latambarcem constituency in view of Zilla Panchayat Election 2025 ( Booth No. 12 to 22)

Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Laying manglore roofing tiles, ridges, valleys etc. complete on roofs over existing battens rafters etc. (Tiles to be issued by the department).

Renewing wooden beams not exceeding 4.00 in length in roofs including making good the holes in walls & painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 meters. Lead :

Second class matti wood beams

Renewing wooden battens in roofs including making good the holes in walls & painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 meter lead :

Supply of mangalore tiles including loading, unloading and transportation complete.

Repairs to plaster in patches of 2.5 sq.m. and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead.

With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section including powder coating with pure polyester powder of shade of required colour on the aluminium section

Plain glass

Providing and fixing fly proof galvanized M.S. wire gauge of I.S. gauge designation 140 g. with wire of dia. 0.56 mm to windows and clerestory windows including 62 x 19 mm beading of second class Indian wood .

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary

Glass panes 3mm thick

Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer- in – charge

Above 1 Sq.m area

Wood Finish Foam Core FRP (Fiber Reinforced Polymer) Door Shutter

Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system, with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) along with printed matt having wooden textures, used along with UV Resistant resin to give the clear wooden texture on the door. The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam) The shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) Technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2008 certified factory.

Accessories:

i) S. S. Hinges 4” - 3 No

ii) S. S. Latch - 1 No

iii) Tower Bolt 5” - 2 Nos

iv) Handle 5” - 2 Nos

FRP (Fiber Reinforced Polymer) Frames with Wood Finish

Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company.

Specified Cross Section : a) 3” x 2”

Providing & fixing ms. Sliding door bolts bright finished or and black enamelled with nuts and screws etc. complete

Providing and fixing M.S. tower bolts (barrel type) with necessary screws etc. complete

Providing and fixing M.S. handles with necessary screws etc. complete.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).

15 mm outer dia CPVC pipe

Providing and fixing brass bib cock (heavy) of approved quality :

15 mm nominal bore

Providing and supplying plastic bucket of 15 lits capacity for polling station .

Providing supplying plastic mug for polling station .

Cleaning the floors of the Polling station by the deploying sweepers as per the directed by R.O.

Cleaning the floors of Waiting room of Polling station by deploying sweepers as per the directed by R.O

Deployment of wet sweepers for cleaning of toilets in foul condition i.e. removal of chokes in the WC and wash basins, cleaning the toilet floors tiles and walls with necessary consumables. rate is inclusive of transportation of wet sweeper to various locations within the constituency were booth is located, transporting water wherever the booths do not have PWD water supply etc. complete. The cleaning has to be carried on 2 days. First time atleast 03 days prior to election and second time on the previous day of election & any other work as directded by the Engineer- in - Charge.

Marking the road with white paint indicating restricted area line/patta of six inches width around the polling booths .

Supplying and placing on rent single piece rotational moulded polythene water tank,having ISI mark and confirming to IS 12701 - 1996, at the site including transportation, carriage etc. as per the Direction of Engineer - In charge. ( tanks to be placed at 9.00 am on the previous day of the election and removed from the site after election process is over ) 500 litre capacity

Providing and fixing at various polling station / different location a temporary ramp made out of 18 mm thick marine ply supported over the frame work of jungle wood of specified size at required intervals including providing 4mm thick and 3/4'' wide top strips of plywood for providing slipway as per the direction of Engineer -in-charge complete .

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

Hiring of vehicle (without A.C.) for inspection of various Polling station as and when the need arises to inspect the progress of work. The vehicle should be at the disposal of the Engineer- in - Charge.

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Providing and fixing 12.5 lts. High level C.I. flushing cistern of approved make with in tegral fittings such as ball valve, ball lever G. I. Chain and pull complete.