REPAIR TO FLOORING ROOFING JOINERY PLUMBING MASONRY MISC WORKS AT 515 ABW UNDER AGE B/R (CENTRAL) OF GE (SOUTH) BANGALORE

Amount

Removing Existing water proofing treatment, including bedding concrete etc complete, cleaning the surfaces with wire brushes, removing dust, foreign material ,scrubbing down with water and rubbish off the same beyond the Defence land complete all as specified and as directed.

M&L 40 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate), as in roof/floor including finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM 1:4 on roof surfaces mixed with WPC @ 3% of total wt of cement finished even and smooth without using extra cement complete all as specified and as directed. Note: WP compound will be measured and paid seperately.

Supply only integral water proofing compound.

Material and labour for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) for filleting and benching, slightly rounded or chamfered on edges complete all as specified and as directed.

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017, 3mm thick and weighing not less than 3.50 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified and as directed.

S & F of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of 20 mm dia GI pipe complete all as specified and as directed.

S&F of 25 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 25 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 25 mm dia female/male brass threaded adapter complete all as specified and as directed.

S&F of 25 mm dia CPVC Union complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 500 ltr and n.exc 1000 ltr tanks, setting aside (or lowering if required) for repairs, cleaning etc, and hoisting if required reconnecting and re-fixing in position complete all as specified

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed including dismantling and removing to store in position all as specified

S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) fixed in repairs complete all as specified and as directed.

Dismantling asbestos cement (corrugated/semi corrugated etc) sheets in roof coverings complete all as specified and as directed.

Dismantling rafter/timber scantling 40 cms and over in sections in any position complete all as specified and as directed.

All as per item No 17 above but in fillet, rails, posts rafters, purlins etc under 40 sqcm in section, fixed in any position complete all as specified and as directed.

S&F mild steel rolled section of grade Fe 410 (Gde E-250) quality A as in main and cross beams hip and jack rafters; purlins where connected to common rafter and running rails ; and similar works fixed with and incl. angle cleats or other connecting plates complete all as specified and as directed.

S&F rolled mild steel section of grade Fe 410 (Gde E-250) quality A as in framed roof trusses, framed gate incl pintle hinges etc. and similar works fixed with and incl. angle cleats or other connecting plates complete all as specified and as directed.

M&L preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S & F 0.50 mm thick pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet of an having.colour on exterior side tensile strength of 550MPA as in roof covering/cladding to walls fied with self tapping screws as specied and conforming complete all as specified and as directed.

All as per item No. 22 above but plain sheet as in ridges complete all as specified and as directed.

Cutting chases brick/stone wall , pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.

S & F of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified and as directed.

S & F of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of 20 mm dia GI pipe complete all as specified and as directed.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed.

S&F of 20 mm dia CPVC Union complete all as specified and as directed.

Cleaning of air lock in GI/CPVC/UPVC pipe 15/20 mm and making the water supply available upto water taps including taking down and refixing of pipes attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings upto 2nd floor of bldgs complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings upto2nd floor of bldgs complete all as specified and as directed.

Excavation in trenches n. exc 1.50 m wide and n.exc 1.5 m deep and taking out in fdn in soft/ loose soil.

Demolition concrete in ground floors and pavings n exc 15cm thickness (below or above ground level).

S&F in repair PVC (SWR) 160 mm 4KGF/scm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings upto 5th floor of bldgs complete all as specified and as directed.

Demolition of Reinforced precast cement concrete manhole cover slab of any description and in any position including and segregation of reinforcement etc complete all as specified and as directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation concrete complete all as specified and as directed.

M&L cement concrete 1:2:4 type B 2 (using 20mm graded coarse aggregate) as surface channels and drains complete all as specified and as directed.

M&L for returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm of hard/dense soil complete all as specified and as directed.

M&L for removal of excavated material exc 250m but n exc 500m and depositing where directed complete all as specified and as directed.

M&L Pre cast RCC (1:2:4) type B1 using 20 mm graded aggregate for cover slab for man holes and set in cement mortar (1:4) complete all as specified and as directed.

M&L for mildsteel deformed ,TMT bars 6 to 8 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F in repair PVC bends any radius 75mm dia

S&F in repair PVC bends any radius 75 mm dia with access door

S&F in repair PVC (SWR) 75 mm branch piece,double (double Y) equal or unequal complete all as specified and as directed.

Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 Sqcm but n.exc 400 Sqcm complete all as specified and as dircted.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 upto 5th floor of bldgs complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces such as wall finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for applying two coats of oil emulsion distemper on newly plastered surfaces incl on wall preparing the surfaces and applying one coat of alkali resistant priming paint complete all as specified and as directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm etc complete upto 5th floor of bldgs complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm but n. exc 2.00 Sqm upto 5th floor of bldgs.

Cutting holes in brick walls built in cement mortar exc half brick wall but n exc one brick wall for incerting hold fast and securing bolts etc and making good dismenteled portion in cement mortar 1 : 3 or cement concrete 1 :2 :3 type B1 as required upto 5th floor of bldgs complete all as specified and as directed.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought frame rebated on the solid, rounded or chamfered put together with glue pinned at joints upto 5th floor of bldgs complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides upto 5th floor of bldgs complete all as specified and as directed.

S&F 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered upto 5th floor of bldgs complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete upto 5th floor of bldgs complete all as specified and as directed.

S&F stainless steel 100 mm butt hinges for doors complete upto 5th floor of bldgs complete all as specified and as directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete upto 5th floor of bldgs complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete upto 5th floor of bldgs complete all as specified and as directed.

S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete upto 5th floor of bldgs complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete upto 5th floor of bldgs complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, upto 5th floor of bldgs complete all as specified and as directed.(Cost of hold fast included in the unit rate of this item.)

M &L factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame wedded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutter as per specification and drawing upto 5th floor of bldgs complete all as specified and as directed.

S&F stainless steel 75 mm butt hinges for doors complete upto 5th floor of bldgs all as specified.

S&F 100 mm size extruded aluminium alloy handles fabricated type with plate anodized upto 5th floor of bldgscomplete all as specified and as directed.

S&F 100 mm long aluminium anodized barrel tower bolts of extruded section upto 5th floor of bldgs complete all as specified and as directed.

Taking down of shutter n.exc 1.0 sqm upto 5th floor of bldgs.

S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc, but divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, any number sto squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples.upto 5th floor of bldgs complete all as specified and as directed.

S&F sheet glass ordinary quality 4mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs stainless steel 75 mm butt hinges for doors complete upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs 75 mm size extruded aluminium alloy handles fabricated type with plate anodized complete upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs 75 mm long aluminium anodized barrel tower bolts of extruded section complete upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs steel windows with side hung shutters including projecting type hinges with steel handle of size 100mm, and steel peg stay, complete with glazing bars, dovetailed or welded complete upto 5th floor of bldgs complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete upto 5th floor of bldgs complete all as specified and as directed.

Repairs to existing steel window / Ventilator hinges by means of replacing the old hinge with box type and welded to steel shutter and frame , easing the shutter,refixing the shutter and making good the suface finish to match extg wall surface complete upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zincchrome primer upto 5th floor of bldgs complete all as specified and as directed.

S&F Powder coated aluminium frame for doors, windows vetilators with one of more rebates incl joining cleat for fixing etc, with powder coating complete all as specified and as directed.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminium spap beading, screws etc,complete all as specified and as directed.

S&F 3 mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 3 mm thick sheet glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F 12 mm thick prelaminate Particle board , interior grade, preliminated both side with decorative choice lamination fixed with al clips for door/patition complete all as specified and as directed.

S&F in repairs Stainless Steel mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm fixed with tinned tacks or galvanized wire staples upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs 4.0 mm thick figured glass, pin head type and glazing with oil putty in square exc 0.5 sqm in each pane upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm upto 5th floor of bldgs complete all as specified and as directed.

S&F Mild steel 2 levers mortice lock, vertical type, size 100mm upto 5th floor of bldgs complete all as specified and as directed.

S&F aluminium (Die cast body) door closer hydraulically requlated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight 61 to 80 Kg and fixed complete all as specified and as directed.

S&F in repairs fancy type brass bracket for curtain rods with screw 25 mm dia including wooden plugs upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs fancy type brass bracket for curtain rods with screws for wall corners 25 mm dia including wooden plugs upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs fancy type aluminium powder coated curtain rods 25 mm dia upto 5th floor of bldgs complete all as specified and as directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including vitreous china 110mm 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including CI/PVC/Vitreous china 'P' or 'S' trap , 110 mm dia PVC(SWR) WC connector and 75 mm dia pipe required length for Nahani trap along with grating and testing manholes as specified by filling with water upto 5th floor of bldgs complete all as specifed and as directed.

S&F in repair vitreous china washdown down water closet set incl internal fittings complete of size 710x390x790mm snow white colour washdown water closet pan & trap (One peace) with soft close seat cover with mild steel chromium plated or aluminium hinginng device incl all joints incl connection to drain pipe complete all as specified and as directed. Make:- Cera (Cruiser) or equivalent in Hindware/Paryware/Jaguar/Kohlar.

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete upto 5th floor of bldgs all as specifed and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short bend etc. complete upto 5th floor of bldgs complete all as specified and as directed.

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type and Pedstal type WC upto 5th floor of bldgs complete all as specified and as directed.

Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs PVC internal fittings (ie syphon) for low/high level flushing cistern upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size , 45 cm long with PTMT adopter,check nuts and washer on both sides for cold water upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water upto 5th floor of bldgs complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets upto 5th floor of bldgs complete all as specified and as directed.

S&F in repair 32 mm dia PVC waste pipe for WHB upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 405mm x 355mm x 178mm (minimum), including PVC waste pipe 40 mm dia upto 5th floor of bldgs all complete all as specified and as directed.

S&F in repairs sink made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 405mm x 355mm x 178mm (minimum), including PVC waste pipe 40 mm dia upto 5th floor of bldgs complete all as specified and as directed.

S&F in repair 40 mm dia PVC waste pipe for SS Kitchen sink upto 5th floor of bldgs complete all as specified and as directed.

M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe upto 5th floor of bldgs complete all as specified and as directed.

S&F 15 mm bore diameter brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with overhead shower with bend pipe upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs stop valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed both ends for iron/CPVC pipes or for unions upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, upto 5th floor of bldgs complete all as specified and as directed.

Petty repairs to leaking bib cock, pillar cocks, Stop cock, angle valve of any description by changing the jumper valve, washers etc and making functional, ensuring proper water supply upto 5th floor of bldgs complete all as specified and as directed.

S&F in repair brass spindle for pillar taps, stop valves, bib taps, angle valves, concealed stop cocks & wall mixer cock for 15mm by changing jumper valves, washers etc upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs shower rose 15mm of brass chromium plated 125 mm dia round with shower arm of 190mm Long Light Body upto 5th floor of bldgs complete all as specified and as directed.

S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs Glass corner shelf including CP railing, radius 250 mm upto 5th floor of bldgs complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 600 mm long complete all as specified and as directed.

S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe upto 5th floor of bldgs complete all as specified and as directed.

S&F 20 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms) upto 5th floor of bldgs complete all as specified and as directed.

S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank upto 5th floor of bldgs complete all as specified and as directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement including taking down plaster, including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparing of newly plastered surfaces and applying three coats of white wash on ceilings upto 5th floor of bldgs complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises upto 5th floor of bldgs complete all as specified and as directed.

M & L for applying two coats of Oil bound distemper on newly plastered surfaces incl preparing the surfaces and applying one coat of alkali resistant priming paint upto 5th floor of bldgs complete all as specified and as directed.

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in sub base of floors complete all as specifed and as directed.

S&F colour glazed ceramic tiles in vertical surfaces area of each tile exc 0.06 sqm and not exc 0.12 sqm set over 10mm thick tendering on fair faces of brickwork or concrete surfaces as backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match compler all as specifed and as directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white washing including cleaning of splashes of white wash on floor/objects etc upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparation of old distempered surfaces of ceilng and applying one coat of oil bound distemper all as including cleaning splashes of distmeper on floor/objects etc upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and cornices and applying one coat of white wash upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces of walls and cornices and applying two coat of white wash upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of Oil emulsion distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparation of old distempered surfaces of walls and applying two coat of Oil bound distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings upto 5th floor of bldgs complete all as specified and as directed.

M&L for complete removal of existing treatment by wire brushing, rubbing down with water of old painted surfaces of walls and applying two coats of oil bound distemper over acoat primer over 3 mm thick birla wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, upto 5th floor of bldgs complete all as specified and as directed.

M&L preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint upto 5th floor of bldgs complete all as specified and as directed.

M&L preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint upto 5th floor of bldgs complete all as specified and as directed.

M&L for preparation of new surface finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Use of all scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures complete all as specified and as directed (Note :- Any floor of bldg up to 5th floor)

M&L preparation of old decorated surfaces of walls externally and applying one coat of cement based paint including filling cracks / holes with wall care putty complete all as specified and as directed

M&L complete removal of existing treatment and applying two coat of cement base paint over a coat of primer upto 5th floor of bldgs complete all as specified and as directed

SREE CONSTRUCTIONS

Suresh painters