GE/863/EWS-T-81 of 2019-20

Amount

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof walls etc with grade of zinc coating 275 complete all as specified and directed.

Ditto as per above item but except sheet

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc complete all as specified and directed.

M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed

M&L for one coats synthetic enamelled paint incl preparation of old steel surfaces of any description over 10cm width or girth complete all as specifed and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and webof 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F Providing and fixing 6 to 8 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified.

M & L 4 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in partitions/ shutters, ceiling etc complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

Refixing in the same opening shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Refixing in the same opening shutters of any description exceeding 1. Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq Cm complete all as specified and directed.

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sq Cm in section complete all as specified and directed.

S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought, bull nosed splayed chamfered or rounded on one edge or face sectional area xceeding 13 and not exceeding 25 Sq. cm complete all as specified and directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, in repairs complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repairs of aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm complete all as specified and directed.

S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm complete all as specified and directed.

S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs complete all as specified and directed.

S&F4 lever Mortice lock Brass vertical type size 100 mm complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21, in repairs complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised in repairs complete all as specified and directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality all as specified and directed .

S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F 20 mm dia., Aluminium alloy anodised curtain rails with brackets fixed in repair complete all as specified and directed.

S&F in repair Harrision rail,mild steel,chromium plated with fixing brackets,stops,rolled etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed

Demolition of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar complete all as specified and directed.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M &L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed.

M & L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing /footpath complete all as specified and directed.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth w/o using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles/granite/ kota complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Detto as per above item but use as skirting, dado and pillar.

S & F Chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M/L rendering 10mm thick in cement plaster 1:4 on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite complete all as specified and directed.

Demolition of stone /boulder, built in cement mortar including all quoins, arches, pillars, etc., but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Demolition of block masonry, built in cement mortar including all quoins, arches, pillars, etc., but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 complete all as specified and directed.

M&L for walling of random rubble stone masonry uncourced well bonded bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M/L precast PCC 1:3:6 type C1 using 20mm graded stone agg as bonder stones set in cement mortar 1:6 complete all as specified and as directed

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed complete all as specified and directed.

M & L rendering 15mm thick on fair faces of concrete work in CM 1:6 incl finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15mm thick on fair faces of concrete work in CM 1:4 incl finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on stone masonary surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed.

Material & labour for white washing three coats on walls incl preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint complete all as specified and directed.

M&L preparation of old painted surface of wall and applying one coat of oil bound distember complete all as specified and directed.

M&L preparation of old painted surface of ceiling and applying one coat of oil bound distember complete all as specified and directed.

M/L preparation of old surface of wall plastered including cornices and pillasters etc and applying one coat of cement base paint on wall complete all as specified and directed.

M/L preparation of old surface of wall plastered including cornices and pillasters etc and applying one coat of white wash on wall complete all as specified and directed.

M/L preparation of old surface of wall plastered including cornices and pillasters etc and applying one coat of white wash on ceiling complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Plain/ Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20mm graded aggregate) as in beam, cantilever,lintel over 1.5 m span complete all as specified and directed.

Precast cement concrete 1:3:6, type C1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

Form work rough finished surfaces of concrete to sides and soffits of beams , lintel and similar items complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified.

Dismantaling water tanks and removing to store exc 500 but n. exc 1000 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position inc 20mm bore PVC float valve all as specified and directedin SSR Pt I complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm dia complete all as specified and directed.

Ditto as per item above but 20 mm dia complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed.

S & F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S &F in repairs of brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F Towel Rail 600 mm long of PTMT fixedwith and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) complete all as specified and directed.

S & F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F for PVC Connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete all as specified and directed.

M&L PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F grating doom 100 mm size of PTMT (min weight 25 grms) complete all as specified and directed.

S&F 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kg f per Cm Cm Square fixed to walls, ceilings or in floors etc complete all as specified and directed.

S & F 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation in hard/ dense soil and getting out complete all as specified and directed.

Demolition and breaking up drain pipes , 100 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description & any position and not otherwise specifically provided for complete all as specified and directed.

M&L Concrete bed to drain pipe 100mm dia incl. packing under and haunching against the sides of pipe PCC 1:4:8 type D2 complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed.

Returning filling in including spreading, levelling , watering and well ramming n exc. 25 cm in layers (Soil) complete all as specified and directed.

Removal of excavated surplus (soils) at a distance exc. 1.5 Km but n. exc 5.0 Km complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down unserviceable main switches, DBs / changeover switch alongwith Teak wood boards etc and making good the disturbed surfaces of wall / floors to match the existing surface complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified for the following:-

One light point / Fan/ bell point controlled by one switch

One socket 3 Pin 5A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size

One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size

One socket 3 Pin 15A pin socket oulet 15Amps on indepndent board with cables 4 Sqmm size

S&F switch piano flush type single pole one way 5/6 Amps.

S&F lamp holder Angle / batton type insulated body with back plate and to be fixed on PVC bock. Including dismantling old one.

S&F socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one.

S&F of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed by Engr-in-Charge including dismantling old one.

S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type including old one.

S&F ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one complete all as specified and directed.

S/F LED integrated batten tube light fittings 20W 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed. Make Cat Part No:LTTB4F20WLED/W of C&S or equivalent in Philips/Bajaj/Crompton Greavves/Wipro.

M&L DB SPN sheet metal enclosure single door suitable for mounting MCB 240 Volts with busbar 8 way including dismantling old one complete all as specified and directed.

S&F MCB SPN 230 Volts 40 Amps i.e. rupturing cap 10 KA, 'B' series complete all as specified and directed.

S&F MCB SP 230 Volts 6- 32 Amps i.e. rupturing cap 10 KA, 'B' series complete all as specified and directed.

S&F LED Street light fitting 45 watt with pressure die cast aluminium having high powered LED as light source IP 65 mounted on suitable GI pipe bracket & clamps and making electric connections complete all as specified and directed.

S&F LED lamp 9W system lumen (NOM) 600 with all accessories complete all as specified and directed. Make: CG Cat part No:- LSW-9W-CDL-BC

Material & labour for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I 2009 connected to main switch board all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 15 mm dia of light grade, for protection of earth lead complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart incl 4 mm suspension wire, one twin core cable flat of size 10 Sqmm complete all as specified and directed.

S&F Submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required 2x 4 Sqmm and 1x2.5sqmm earth wire complete all as specified and directed.

S&F bulk head luminous LED type 10W ultra modern with LEDs on light source and opal diffuser complete all as specified and directed.

M & L for House service bracket (hook type) complete with 3.0 mtr long G.I pipe 40mm dia Med grade, two nos 90 degree bends, MS hook and stay or guy complete all as specified and directed.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 18693.00

Kusan Enterprises

M/S J.S.ENTERPRISES

M/S Shamsher Negi Dewa