Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹34.9 LAccepted-AOC | 1 | Accepted-AOC Being lowest and reasonable | |
| 2 | 2₹37.6 L+₹1.4 L (3.90%)Rejected-Finance A BLOCK FLAT NO 301 SPECTRA METRO HEIGHTS NAGOLE HYDERABAD RANGA REDDY TELANGANA 500 068 | HYDERABAD | RANGA REDDY | TELANGANA | 500068 | 2 | Rejected-Finance Not being the lowest bidder | |
| 3 | 3₹37.6 L+₹1.4 L (3.90%)Rejected-Finance | 3 | Rejected-Finance Not being the lowest bidder | |
| 4 | 4₹39.8 L+₹3.6 L (10.0%)Rejected-Finance | 4 | Rejected-Finance Not being the lowest bidder | |
| 5 | 5₹40.7 L+₹4.5 L (12.5%)Rejected-Finance H NO 8 7 66 PLOT NO 76 VENTURE 2 HASTINAPURAM CENTRAL HYDERABAD 500 079 | HYDERABAD | HYDERABAD | TELANGANA | 500079 | 5 | Rejected-Finance Not being the lowest bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
19 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I) R AND D RCI, HYDERABAD
GE(I) RND RCI, MILITARY ENGINEER SERVICES, VIGNYANAKANCHA, RCI, HYDERABAD
COMPREHENSIVE REPAIRS INCLUDING REPLACEMENT OF FITTNGS AND FIXTURES IN ELSEC CPDC DSC UNDER GE I RND RCI HYDERABAD
2022_MES_544406_1
8730
Open Tender
Civil Works
Item Rate
300 days
GE(I) R AND D RCI
MES enlisted Class D category a i Un enlisted Meeting enlistment criteria of D class in MES and having no recovery pending. For further details ref NIT.
8 documents required · 8 mandatory
₹500
Yes
GE(I) R AND D RCI, HYDERABAD
₹88,000
Yes
10 Oct 2022
22 Aug 2022
21 Sept 2022
22 Aug 2022
19 Sept 2022
5 Sept 2022
Amount
Demolition of PCC in ground floors and paving's not exceeding 15cm thickness (below or above ground level) complete including disposal of debris off the premises all as directed by Engineer in Charge.
M&L, PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.
M&L, 50mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L, 60mm thick, M-35 Grade, machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 complete all as specified and directed
Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.
Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each complete all as directed.
Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.
S&F 1.25mm thick Pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs. hinges, lock strike plate, etc., complete, as specified
S&F 1.25mm thick Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs. hinges, lock strike plate, etc., complete, as specified
S&F, second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints etc., complete all as specified and directed.
S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.
S&F, 30mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc., complete all as specified and directed. Note: Sizes of members of shutters as specified in SSR Part I.
M&L in repairs, 12mm thick prelaminated particle board, exterior grade, one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framework complete all as specified and as directed.
M&L in repairs, 18mm thick prelaminated particle board, exterior grade, one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framework complete all as specified and as directed.
S&F in repairs, 19/20mm dia mild steel powder coated curtain rod, including suitable matching fancy type brackets on both ends including 8No curtain rings with hooks for each opening, complete all as specified and directed.
S&F, mild steel clamps, hold fasts and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.
S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.
S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F in repairs, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
S&F, 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
S&F in repairs, 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
S&F, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.
S&F in repairs, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.
S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.
S&F in repairs, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.
S&F in repairs, 100mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.
S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F in repairs, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F in repairs, aluminium anodized hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repairs, aluminium (Die cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kg complete all as specified and as directed.
S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples complete all as specified and as directed.
Re-arranging the existing aluminium grid work /Armstrong grid by strengthening the member and refixing in ceiling by drilling/cutting slab and hanging with mild steel rods / GI suspended wire after taking down of existing ceiling boards/tiles and refixing after carrying out repairs complete all as directed
S&F in repairs, mineral fibre acoustical suspended ceiling system with Mina Tuff (Micro look) edge tiles with silhouette exposed grid. The tiles hold have humidity resistance (RH) of 99%, NRC upto 0.6, light reflectance 88%, Thermal conductivity K=0.052-0.057 w/m K, colour white, fire performance Class-I (BS476 Part 6 & 7) in module size of 600 x 600 x 16mm with bio black coating on the face of the tile, impact resistant and suitable for green building application, with recycled content of 63%, Tile shall be laid on Silhouette profile grid system with 15mm white/black colour and with a web height of 38mm and having load carrying capacity of minimum 11.68 Kgs/Sqm, Silhouette, Main runner and Cross tees to have mitred ends and Birds mouth notches to provided mitred cruciform junction complete all as specified and directed. Make: Armstrong, Saint Gobain
S&F in repairs, Fine Fissured RH99 Armstrong ceiling tile of size 600 x 600 x 12/16mm thick as per approved pattern complete all as directed.
S&F in repairs, push pull or manual type steel rolling shutter, 1.25mm thick laths without ball bearing including top hood cover, anchoring rod, hasp and one shop coat of primer and erected in position as indicated complete and making good the disturbed surfaces etc., complete all as specified and directed.
S&F in repairs, gear operated type steel rolling shutter with bevel gear box and crank handle, 1.25mm thick laths without ball bearing including top hood cover, anchoring rod, hasp and one shop coat of primer and erected in position as indicated complete and making good the disturbed surfaces etc., complete all as specified and directed.
S&F, Ball bearing for rolling shutters complete all as specified and directed.
Dismantling of sheets in roof coverings (corrugated, semi corrugated etc.,) any material including ridges complete all as directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as directed.
S&F, Roof trusses (framed), trussed, purlins, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe 410W (Grade E-250) quality 'A' complete all as specified and directed.
S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet / trapezoidal steel sheet 0.50mm base metal thickness of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws and EPDM washers complete all as specified and directed.
S&F, Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws and EPDM washers complete all as specified and directed.
M&L, preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.
M&L, 30mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring, finishing the surface even and smooth using extra cement including necessary formwork complete all as specified and directed.
M&L, light coloured vitrified tiles in floors of size 600 x 600 x 9 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.
M&L, 9 to 10mm thick light coloured vitrified tiles in skirting of size 600 x 100mm, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.
M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 400 x 400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed. Note: Shade, design/pattern of tiles shall be as approved by GE
M&L, coloured glazed ceramic tiles of size 300 x 450mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE
Demolition of stone slabs, tiles, cement concrete tiles/paver blocks of any description or thickness in floors, laid and bedded in any mortar including disposal of debris off the premises complete all as directed.
M&L, 18 to 20mm thick, approved machine cut, coloured Granite, factory polished, edges rounded in steps, cooking platform and the like laid over and including screed bed or bedding layer 20mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.
M&L, 12 to 18mm thick machine cut coloured granite, factory polished, in wall lining, (veneering to wall) over 10mm thick backing coat in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed
S&F, 3mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.
S&F, 4mm thick sheet glass, plain, ordinary quality and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.
S&F in repairs, vitreous china wash hand basin white 550 x 400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size complete all as directed
S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete including fixing to floor with bolts, including provision of plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
S&F in repairs, 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed.
S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.
S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs, 125mm size chromium plated shower rose with or without swivel joint complete all as specified and directed.
S&F in repairs, chromium plated Hand Shower (Health Faucet) with 8mm Dia 1.2meter long flexible tube and wall hook complete all as specified and directed. Make: Jaquar CAT No 573 or techno commercially equivalent in Hindware or Parryware
S&F in repairs, chromium plated towel rail 20mm dia, 'D' type, 600mm long, premium quality all as directed.
S&F in repairs, chromium plated towel ring complete all as specified and directed.
S&F in repairs, plastic water closet seat cover, white, closed pattern with recessed bottom and cover aluminized hinging device complete all as specified and directed.
S&F in repairs, PTMT grating round of size 125mm (minimum weight 40g) complete all as specified and directed.
S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.
S&F in repairs, 32mm dia PVC flexible waste pipe with fittings of suitable length as per site requirement for WHB/Sink or urinal complete all as specified and directed.
S&F in repairs, 32mm dia brass chromium plated waste coupling fittings for wash hand basin etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
S&F in repairs, glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.
S&F in repairs, stainless steel kitchen sink with drainage board, 1mm thick with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repairs, stainless steel sink 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make for item No 74 & 74: BLUESTAR /NIRALI /ANJALI /JAYNA /DIAMOND
S&F in repairs, 15mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or concealed in walls and making good, ducts/ceilings or laid in floors complete all as specified and directed.
All as per item No 76 above but 20mm bore of pipe.
S&F in repairs, 500litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.
All as per item No 78 above but 750litres capacity.
All as per item No 78 above but 1000litres capacity.
All as per item No 78 above but 2000litres capacity.
S&F, Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed. Make: Vista Levlor / AMAR / MAC / MARC
Taking down existing horizontal/vertical, Venetian blinds in any position including aluminium metallic slot rail and all fittings and refiing the same in its original position after cleaning, repairing, replacement of damaged nylon rope, thread, operating chord, rear wheel, locking wheel, replacement of blinds with same colour and quality where necessary, thronging of blinds, strips and ensuring free functioning of blinds complete all as directed.
Complete removal of existing treatment from external surfaces of walls thoroughly by machine grinding, scrapping, rubbing/wire brushing and watering with jet etc., filling cracks, holes and dents and applying two coats of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality, over a coat of primer all as per manufacturer's instruction complete all as specified and as directed.
M&L, preparing old plastered surfaces of walls, ceilings, cornices, soffits of slabs and chajjas fins and facias etc., filling cracks, holes and dents and applying one coat of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality all as per manufacturer's instruction complete all as specified and directed.
M&L, preparation of old plastered surfaces of walls, ceilings including cornices, pilasters etc., and applying one coat of distemper oil emulsion complete all as specified and directed.
Complete removal of existing treatment from internal surfaces of walls thoroughly by machine grinding and applying one coat of water proof wall care putty, 1mm thick (average) including rubbing/grinding with sand paper and making smooth and even surface and applying two coats of distemper oil emulsion, white or tinted over a coat of alkali resistant primer complete all as specified and as directed.
M&L, preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
Repairs to aluminium door shutters not exceeding 2Sqm in area, easing of aluminum door by adjusting floor spring / door closer, locking device, tower bolts, hinges, oiling /greasing in hinges and floor spring and making fully functional including replacement of hardware where required complete all as directed.
Repairs to aluminium window shutters not exceeding 1.5Sqm in area by removing and refixing in the same position by adjusting rollers, bends in tracks, hinges, handles, tower bolts, oiling /greasing in hinges and making fully functional including replacement of hardware where required complete all as directed.
SM CONSTRUCTIONS
Richcon Engineers
Indu Electricals
M/s ANUSHA ENTERPRISES
SHAH ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .