REPAIR TO FENCING, DRAIN, PATH AND HARDSTANDING AT CARIAPPA OFFRS ENCLAVE, KV COMPLEX, MH, MDC, ECHS, CDU, CIB, GE OFFICE COMPLEX, BSO AND ADJACENT AREA IN AOR OF AGE B/R I UNDER GE PANAGARH

Amount

Demolition for brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed

M&L for brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed

M&L for extra for forming fair finish drain channel upto 30 cm inner grith in cement concrete using extra cement complete all as specified and directed

M&L for extra for forming fair finish drain channel inner girth exc 30 cm but not exc 45 cm in girth in cement concrete using extra cement complete all as specified and directed

M&L for cement concrete type B-2, 1:2:4 (using 40 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed

Demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

M&L for cement concrete type C-1 1:3:6 (using 20mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges complete all as specified and directed

M&L for PCC in foundation filling and mass concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed

Dismantling post (Wood/Steel or RCC) any section including taking out embedded portion and making good disturbed portion complete all as specified and directed

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire,etc, flat iron fillets ( for securing wire mesh etc.) top section fixed including all necessary drilling,bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F framed work as in doors or E35 gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 290 Gde-E-165 complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4 )and finish smooth & even with using extra cement complete all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

Dismantling fencing wire mesh any type complete all as apecified and directed by Engr-in-Charge

S&F galvanised iron wire using hot dip technology electrogalvanised coating chain link fencing wire mesh of size 75mm X 75mm having minimum dia of wire 3 mm conforming to IS 2712-2003 having a tensile strength of 400 to 500 MPa. The mesh wire and line wire of the fabric shall be manufactured from ISI marked (Make- TATA wireon) galvanized steel conforming to IS-280:2006 (4th Rivision). The kunckled ends should be atleast 50% of the size of square mesh. The wires used in fencing should be long lasting and resistance to corrosion and testing criteria fulfill the requirement as per IS 1161:1998 complete all as specified and directed.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long complete all as specified and directed

M&L for 100 mm thick cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub bases complete all as specified and directed

M&L for 50 mm thick cement concrete type B1, for PCC (1:2:4) (using 20 mm graded stone aggregate) used as in sub base, sub floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed

M&L for 25 mm thick chequered pre-polished coloured cement concrete tiles of approved size,set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M/S PROVAS GHOSH (BID ID -3071308)

M/S TILKU ENTERPRISE (BID ID -3071284)

S.P.S. SUPPLIERS (BID ID -3071343)

M/S BHATTACHARJEE ENTERPRISE (BID ID -3071331)

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3071352)

S.D.ENTERPRISE (BID ID -3071613)

N B CONSTRUCTION (BID ID -3071362)

SANJAY KUMAR SUPAN (BID ID -3071580)