Repair to sunken floor, sanitary fittings ,floor, dado, plaster, cleaning of service tank, internal water supply and certain B/R nature repairs to otm /md accn at CQA (V) and DAD complex under GE (S) Ahmednagar

Amount

DismantIing floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviciable tiles to store and rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tile 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 set & jointed in neat cement slurry with tile adhesive as per manufacturer's instructions and pointed in coloured cement to match the tiles complete all as specified & directed. Note - Colour and pattern of tiles shall be approved by GE.

Digital porcelain wall tiles of size exceeding 0.18 Sqm but not exceeding 0.38 Sqm (size of tiles as approved by Engr-in - charge) laid over and including 15 mm thick rendering in CM 1:6 even and fair to receive tiles, set and jointed in neat cement slurry with tile adhesive as per manufacturer's instructions and pointed in coloured cement to match the tiles complete all as specified and directed. Note - Colour and pattern of tiles shall be approved by GE.

Light colour square vitrified ceramic tiles 10 mm thick, polished, area of each tiles exc 0.36 Sqm but n. exc 0.42 Sqm as in floors laid over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry with tile adhesive as per manufacturer's instructions and pointed in coloured cement to match the tiles complete all as specified and directed. Note - Colour and pattern of tiles shall be approved by Engineer-in-Charge.

All as per item No. 04 here-in-before but on verticle surfaces such as skirting/dado laid over 10 mm thick rendering in CM 1:4 on brick or concrete surfaces. Note - Colour and pattern of tiles shall be approved by Engineer-in-Charge.

Glazed ceramic coloured (plain or printed) tiles 6 to 7 mm thick of area exc 0.11 Sqm but nexc 0.18 Sqm thick laid over and including 10 mm thick rendering in CM 1:4 on vertical surfaces such as in skiting / dado with set and jointed in neat cement slurry & tile adhesive as per manufacturer's instructions complete all as specified and directed. Note - Colour and pattern of tiles shall be approved by GE.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

75 mm thick PCC 1:4:8, type D2, using 40 mm graded stone aggregate as in sub-base complete all as specified and directed.

Paving tiles of size 30 cm x 30 cm x 10 mm of approved pattern laid over and including 15 mm thick cement screed I n CM (1:6) including filling of joints with Dr fixit joint sealent compound as per manufacture's instructions complete all as specified and directed.

Precast cement concrete interlocking tiles (glossy finish/ rubber mat finish) of 60 mm thick ,hydraulically pressed cemented tiles of grey colour with pigments,(glossy finish/ rubber mat finish) factory made, M-35 grade as in floor laid over & including 25 mm thick sand cusion and including filling of interstices with fine sand complete all as specified and as directed by Engineer-in-charge. Note Size, shape & pattern of tiles shall be as approved by GE

Cement concrete 1:3:6, type C1, using 20 mm graded aggregate as in side locking of interlocking paver blocks complete all as specified and directed.

Cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate, 75 mm thick as in plinth protection including finishing the surface fair and even laid in alternate bays system, length of each bay n exc 1.5 mtr, including forming 12mm wide and 50 mm deep joint, filled with mastic filling to the full depth comprising mixture of one part heated blown bitumen of 85/25 penetration and two parts sand by (volume) complete all as specified and directed

Machine cut kota stone flooring 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer CM 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror/ granite finish polishing including removing dust complete all as specified and directed.

All as per ser item no. 13 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site including10 mm thick backing coat in CM (1:4) complete all as directed.

Providing, cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Demolition of brickwork or stone/boulder masonry, built in Cement mortar/ Cement lime mortar including all quoins, arches, pillars,etc complete all as specified and directed.

Precast cement concrete block masonry with solid block of PCC (1:5:8) using 20 mm stone aggregate, exc. 10 CM in width in CM (1:6) complete all as specified and directed.

All as per srl item No. 17 here-in-before but except PCC blocks complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

15 mm thick rendering in CM 1:4 on stone masonary surfaces or other than fair faces of brick surface/ concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface finished even and smooth with sagol finish without using extra cement complete all as specified and directed.

5 mm thick plastering in CM 1:4 on fair faces of brick or concrete surface finished even and smooth with sagol finish without using extra cement, as in ceilings, complete all as specified and directed.

Preperation of new plastered surfaces of walls and applying of two coat of cement base paint over a coat of primer complete all as specified and directed.

Preperation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer complete all as specified and directed.

Preperation of new plastered surfaces of ceilings and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer complete all as specified and directed.

Complete removal of existing treatment from old decorated plastered surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces of walls applying two coats of acrylic emulsion exterior grade paint (Apex or equivalent in Nerolac) over a coat of alkali primer.(As approved by GE.

Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) on curved surfaces over metal frame work and reinforced including G.I. wire mesh for any sunk or raised moulding etc. as per design approved by Engineer-in-charge, complete all as specified and directed.

Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) on flat surfaces over metal frame work and reinforced including G.I. wire mesh for any sunk or raised moulding etc. as per design approved by Engineer-in-charge, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

Single piece coloured granite of any type , 20 mm thick (table rubbed and polished) as in steps,jambs, pillars,window cill,cooking platform,wash basin plateform and like laid over and including 15 mm thick screed bed in CM 1:4 set in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed by GE.

Precast cement concrete 1:2:4, type B1 using 20 mm graded aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain faces including necessary form work complete all as specified and directed.

Disconnecting existing PVC tanks, exc 250 and not exc 500 Ltrs capacity, setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt etc from mounts circulating pipe etc. complete all as specified and directed.

All as per serial item no. 33 here-in-before but PVC tanks of capacity exc 500 and not exceeding 1000 Ltrs .

All as per serial item no. 33 here-in-before but PVC tanks of capacity exc 1000 and not exceeding 2000 Ltrs .

Cover for PVC water tank including lid for any capacity of tanks fixing with necessary device fixed in repairs, complete all as specified and directed.

Ball valves, 15 mm bore, high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, minium weight 142 gms, fixed in repairs complete all as specified and directed.

Ball valves, 20 mm bore, high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, minium weight 210 gm, fixed in repairs,complete all as specified and directed.

Ball valves, 25 mm bore, high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, minium weight 455 gms, fixed in repairs, complete all as specified and directed.

Gun metal globe or gate valves 15 mm bore with iron wheel head, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

All as per serial item no. 40 here-in-before but 20 mm bore

Stop valves 15 mm bore, cast copper alloy, chromium plated, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

Stop valves 20 mm bore, cast copper alloy, chromium plated, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

Bib tap 15 mm bore , cast copper alloy, chromium plated, with crutch butter handle, screwed down screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Bib tap 15 mm bore,fancy type, chromium plated, screwed down screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.

Pillar tap 15 mm bore, chromium plated, screwed down high pressure, with or without lettered `Hot' or Cold with long screwed shanks and fly-nuts, screwed for iron pipe ,fixed in repairs complete all as specified and directed.

Pillar tap 15 mm bore, fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe ,fixed in repairs complete all as specified and directed.

Self-closing taps, 15 mm bore, cast copper alloy, chro-mium plated,screwed for iron pipe and fixed in repairs, complete all as specified and directed.

500 litres capacity rotational moulded polythene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position as in repairs, including connecting to inlet and outlet pipes complete all as specified and as directed by GE.

1000 litres capacity rotational moulded polythene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position as in repairs, including connecting to inlet and outlet pipes complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

15 mm dia tubes medium grade galvanised Iron, ISI marked, complete with all fittings as required and fixed to walls and ceilings or laid in floors complete all as specified and directed.

20 mm dia tubes medium grade galvanised Iron, ISI marked, complete with all fittings as required and fixed to walls and ceilings or laid in floors complete all as specified and directed.

25 mm dia tubes medium grade galvanised Iron, ISI marked, complete with all fittings as required and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Fixing only 15 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and directed.(Serviceable pipe retreived from taking down shall be refixed under this item)

Fixing only 20 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and directed.(Serviceable pipe retreived from taking down shall be refixed under this item)

Fixing only 25 mm bore old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as specified and directed.(Serviceable pipe retreived from taking down shall be refixed under this item)

Towel rail 600 mm long of chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats, as in repairs complete all as specified and directed.

Towel ring of chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats, as in repairs complete all as specified and directed.

Cockroch trap of 125 mm dia chromium plated with or without waste hole, fixed in repairs complete all as specified and directed.

Glass corner shelf fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 gms) fixed in position where directed, complete all as specified and directed.

Urinal spreader of chromium plated for fixing with 15 mm bore pipe, fixed in position, fixed in repairs complete all as specified and directed.

PVC connection 15 mm size with PTMT nuts, 600 mm long, fixed in position as in repairs complete all as specified and directed.

10 Ltrs capacity PVC flushing cistern, syphonic action type, high/low including ball valve, bracket inlet, PVC pipe, PVC connection 600 mm long etc, fixed in repairs, complete all as specified and directed .

Water closets, Vitreous China, Orissa Pattern, size 580 x 440 mm, White integral foot rest incl `P' or `S' trap & connections to flushing pipe, anti syphonage pipe etc complete all as specified fixed in repairs complete all as specified and directed.

Special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade 1:3:6 filling, floor area of WC upto 1.5 Sqm etc. complete all as specified and directed by Engineer-in-Charge. Note- The rates incl for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm all as specified and directed

Vitreous china wash down water closet pan ( padestal pattern) any colour P or 'S' trap with and including plastic seat cover including 10 litre capacity chinaware flushing cister fitted with EWC complete with connections, fixed in repairs complete all as specified and directed.

Vitreous China wash hand basin White oval type of approved design and size including cutting and setting in granite stone with necessary fitting and adhesive, including waste coupling and waste & vent pipe and suitable brackets if required but excluding taps fixed in repairs complete all as specified and directed.

Vitreous China wash hand basin White 580 x 450 mm size flat back including cutting for and pinning in ends of brackets, including waste coupling and waste & vent pipe and brackets but excluding taps, fixed in repairs complete all as specified and directed.

Vitreous china urinal, half stall type white (excluding flushing cistern,flush pipe) including pair of brackets , PVC waste & vent pipe and connections fixed in repairs complete all as specified and directed.

75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repairs, complete all as specified and directed.

110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls as in repairs complete all as specified and directed.

75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, flaid in trenches/floors, as in repairs, complete all as specified and directed.

110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors, as in repairs complete all as specified and directed.

PVC (SWR) bends 75 mm bore with access door fixed in position complete all as specified and directed.

PVC (SWR) bends 110 mm bore with access door fixed in positin complete all as specified and directed.

75 mm bore PVC (SWR) floor trap plain with gratings including jointing with solvent cement , fixed in position as in repairs complete all as specified and directed..

Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory, with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe ,overall size 915 mm x 460mm, bowl size 410 mm x 330 mm x 160 mm including down take pipe and CP coupling , fixed in repairs, complete all as specified and directed.

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) exc 1.50 sqm & n.exc 4.00 sqm each and removing from site and making good disturbed surface of walls in cement mortar 1:3 complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutters from the frames) n.exc 1.50 sqm each and removing from site all as spd and directed and making good disturbed surfaces of wall in CM 1:3 complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm and refixing in the same opening all as directed.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete, size of frame 105 mm x 60 mm complete all as specified and directed.

Second class hardwood , 35 mm thick,factory made , plain framed , panelled shutters (two panels ) with panel of 9 mm thick BWP plywood bonded with high quality phenol formal dehyde synthetic resin adhesive confirming to IS-710, the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401 complete all as specified & directed.

Second class hard wood , 35 mm thick, gauged & skeleton shutters, factory made open rebated and prepared to receive glass, gauge etc (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc., size of members of shutter shall be as specified in SSR 1991 Part-I, Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified & directed.

Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 150 of SSR part-II 2004. Make: Rajshree / Sintex

Factory made solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing on page 146 of SSR pt II 2004 complete all as specified and directed. Make: Rajshree / Sintex

Factory made steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed.

Factory made steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay complete without glazing bar with & including fixing flat iron for securing wire mesh complete all as specified and directed.

Mild steel framed guard bars conforming to Fe-290-0 or Fe-330-0 welded to steel ventilators & window complete all as specified & directed.

Mild steel butt hinges 100 mm long medium weight cold rolled, ISI marked, fixed complete all as specified and directed.

300 mm long rat tail helical door spring including roller and roller plate , fixed in repairs complete all as specified and directed.

Aluminum anodised barrel tower bolt 150 mm long of extruded aluminium section, fixed complete all as specified and directed.

Aluminum handle 125 mm long fabricated type, anodised, fixed complete all as specified and directed.

Galvanised mild steel wire cloth 0.56 mm nomonal dia of wire & avg width of aperature 1.18 mm & fixed with wooden beads / tinned tacks or galvanised wire staples & fixed to steel / wooden frame work, as in repairs complete all as specified & directed.

Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.4 mm and fixed to steel doors and widows with necessary 12mm iron flats with welding and including dismantling of old wire cloth, fixed in repairs, complete all as specified and directed by Engr in Charge. (Rates are inclusive of welding and supply of flats wherever required)

Hacking out old broken glass (any thickness size quality or description), from wooden/steel frames stone concrete or brick surrounds glazed putty or fixed with beads including punching or drilling out old glazing pines/spring clips complete all as specified and directed.

Sheet glass 3 mm thick, plain, ordinary quality & glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed.

Frosted or figured glass, pin headed type 3 mm thick & glazing with oil putty in square n.exc 0.50 sqm in each pane of metal frame complete all as specified & directed.

Dismantling of boarding any description, fixed in any position with nails complete all as specified and directed.

PVC sheet of 5 mm thick, of approved size and pattern as in wall panelling including all necessay fitting and drilling opreation as required including refitting electrical fittings/accessories after adjustment of electric points as per requirement of level etc. complete all as directed.

18/19mm thick prelaminated particle board interior grade , prelaminated one side with decorative choice lamination & other side balancing with lamination,fixed wih screws to timber frame work or as in pelmets etc, as in repairs complete all as specified and directed.

Continuous (Piano) hinges, mild steel, bright finish or electro galvanized of 30 mm width of flaps (when opened) complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

Aluminium (die cast body) door closer hydraulically regulated universal type , suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg , fixed in repairs, complete all as specified and directed.

Aluminium (Die cast body) door closer hydraulically regulated universal type , suitable for door shutters of 701 to 850 mm in width and of weight betwwen 36 to 60 kg, fixed in repairs, complete all as specified and directed.

Aluminum anodized powder coated frame for doors / windows / ventilators using suitable sections including joining cleats etc, and fixed to walls / floors with mild steel chromium plated screws using 1st class hard wood plugs complete all as specified and directed. Make :- Hindalco / Jindal

Anodised aliminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.

Aluminium anodised powder coated window/door 3 track sliding shutters, without sash bar, aluminium section weighing 0.55 kg/m (Minimum) including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws etc complete to be fixed with 5.5 mm eatched glass and netlon wire mesh including 4 mm PVC sheet at bottom portion, complete all as specified and directed.

Dismantling of wall & ceiling bords (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary fixing/ repair /replacement of existing electrical fittings at site complete all as specified and directed.

Hangers made out of 6 mm dia GI wire (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed.

Gypsum Board 12 mm thick as in ceilings fixed with screws as per manufacturers instructions in incl all fitings etc. complete all as specified and directed.

m/s shivam tools and equipment

Priyadeep Construction

MS. A.S. CONSTRUCTION

Chandrama Construction

PRADIPKUMAR POPATRAO THUBE

AMAR CONSTRUCTION

S.k ENTERPRISES

G. K. Engineering And Fabricators

OM SAI ASSOCIATES

M/s. Sagar Traders

M/s AG PATHAN