REPAIR/MAINT/REPLACEMENT OF INTERNAL ELECTRIFICATION WITH FITTING FIXTURE, GEYSER, CEILING FAN, EXHAUST FAN, WALL FAN, VOLTAGE STABILIZER INCLUDING BUILDING SECURITY LIGHTS FITTING IN THE AREA OF BASE HOSP, SOI AND PD AUDITIORIUM UNDER GE E/M LUCKNOW

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, bell push, light fitting etc for taking credit and making good disturbed surfaces of walls, floors,etc complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC(FRLS)insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC (FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per Item No 2 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per Item No 2 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 2 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 sqmm and green colour earth cable of size 2.50 sqmm.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn into and including suitable size surface conduit/casing caping, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per Item No 6 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per Item No 6 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 6 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 sqmm and green colour earth cable of size 2.50 sqmm.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn into existing conduit, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per Item No 10 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per Item No 10 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 10 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

M & L for Point wiring complete with 1.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through existing rigid non metalic PVC conduit and conduit accesseries concealed in walls/ceiling, electrogalvanised pressed steel modular metal flush box 1/2 module to 8 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer along with white cover plate with plate up to 6 module for housing modular switches, and sockets 1.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly complete all as specified and as directed. (Note :- Modular frame and plates will paid seprately)

All as per Item No 14 above but for one 5 Amp socket outlet point on an independent board.

All as per Item No 14 above but for one 5 Amp socket outlet point on the same board with other switch.

All as per Item No 14 above but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed.

S & F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in1, 3 pin 5 and16 Amp, 230 volts complete all as specified and directed.

S&F socket outlet flush type multipurpose 2 in 1, 5 pin 6Amp, 230 volts complete all as specified and directed.

S&F fan regulator electronic,step up socket type,230 volt,125 W and conection complete all as specified and directed.

S&F modular switches 1 way 6A,1 module, complete all as specified and directed.

S&F modular switches 1 way 16A,1 module, complete all as specified and directed.

S&F modular 6 A sockets-5 pin 2 module complete all as specified and directed.

S&F modular 6A/16A sockets-3/5 pin combine 2 module, complete all as specified and directed.

S&F Modular white cover plate with frame 8 module, complete all as specified and directed.

S&F Modular white cover plate with frame 6 module, complete all as specified and directed.

S&F Modular white cover plate with frame 4 module, complete all as specified and directed.

S&F Modular white cover plate with frame 3 module, complete all as specified and directed.

S&F Modular white cover plate with frame 2 module, complete all as specified and directed.

Supply and fix modular type blanking plates, one moudle complete all as specified and directed.

Supply & fix modular fan regulator 120/100 W, 2 Module for ceiling fan fixed, in board and connecting as directed, after dismantling and removing unserviceable regulator, complete all as specified and directed.

S&F ceiling rose surface bakelite three terminal complete all as specified and directed.

Supply and fixing in replacement wall/surface mounting luminaires (Mirror Light) integrated LED Batten (2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements complete all as specified and directed.

Supply and Fixing in replacement wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

Supply and Fixing in replacement wall/surface mounting luminaires integrated LED Batten 20/22 W, warm yellow 3000/4000 K, 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

S&F in replacement LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories, complete all as specified and directed.

S & F in replacement of GI pipe light grade, 32 mm bore, 1.20 mtr long bend in required shape, MS clamp 40x3mm thick duly painted with two coats of synthetic enemal paint fixed on wall including bolts and nuts complete all as specified and directed.

S&F in replacement 30 W flood light LED fitting Warm/day cool as required, IP 65 protection with high power LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts and bolt complete all as specified and directed.

S&F in replacement of surface type round LED 12W downlighter complete all as specified and directed.

S&F in replacement of surface type square LED 12W downlighter complete all as specified and directed.

S&F in replacement of recess type square LED 12W downlighter 6500/4000K complete all as specified and directed.

Supply and fixing in replacement LED lamp 7/9 watt, complete all as specified and directed.

Supply and fixing in replacement of Recess LED llight fittings of size 2X2 36 watt LED made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture including cutting and making false ceiling of any pattern/mtrl proper fixing of light in falce ceiling , electrical connection up to 15 feet height of various ward and department complete all as specified and directed.

Supply and fixing in replacement of Recess LED llight fittings of size 2X2 20 watt LED made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture including cutting and making false ceiling of any pattern/mtrl proper fixing of light in falce ceiling , electrical connection up to 15 feet height of various ward and department complete all as specified and directed.

S&F in replacement of environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstron/Grid ceiling LED 1x4 box type LED 30W rectanguler size L-1200x W-300mm x70mm metal body complete all as specified and directed.

S&F in replacement LED 4 pin 18 watts 4 Pin , suitable for light fittings witn electric connection complete all as specified and directed.

Supply and fixing in replacement FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as specified and directed.

Supply and fixing in replacement FTL with ultra bright crystal LED tubelight, 18 W ,6000 K with high efficency, with neccessary electrical connection including disconnection old elecronic ballast if any complete all as specified and directed.

S & F in replacement integrated LED type Post top lantern with high power 25/30 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and including neceesary electrical connection complete all as specified and directed.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. Note :- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. Note :- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn into existing conduit complete all as specified and directed. Note :- One unit length shall measured as two run of main wire and one run of earth wire.

Supply and fixing in replacement for 1.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

Supply and fixing in replacement for 2.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

Supply and fixing in replacement for 4 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

S & F three core PVC insulated FRLSH sheathed cable with 1.5 sqmm stranded copper conductor complete all as specified and directed.

S&F in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 10 sqmm aluminiuam conductor complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in replacement MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in replacement MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F in replacement of sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with including one single pole MCB 20 Amps complete all as specified and directed.

S&F in replacement double door VTPN 4 way double door suitable for 4 pole MCCB 63-125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed. (Note: MCCB & MCB to be measured and paid seprately)

S&F in replacement MCCB 63-125 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and directed.

Supply and fix in replacement wall mounting fans 400 mm (white) string controlled oscillating type including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and directed.

S&F in replacement modular switches 1 way 6/10A,1 module, complete all as specified and directed.

S&F in replacement modular switches 1 way 16A,1 module, complete all as specified and directed.

S&F in replacement modular 6 A sockets-2/3 pin combine 2 module, complete all as specified and directed.

S&F in replacement modular 6A/16A sockets-2/3 pin combine 2 module, complete all as specified and directed.

S&F in replacement fan step regulator modular 100/120W, 2 module, complete all as specified and directed.

S&F in replacement modular white cover plate with frame, 2 module, complete all as specified and directed.

S&F in replacement modular white cover plate with frame, 3 module, complete all as specified and directed.

S&F in replacement modular white cover plate with frame, 4 module, complete all as specified and directed.

S&F in replacement modular white cover plate with frame, 6 module, complete all as specified and directed.

Supply and fixing PVC casing and caping, 20mm wide complete all as specified and as directed.

S & F in replacement of switch piano flush button single pole one way 5/6 Amp 240 volt complete all as specified and as directed.

S & F in replacement of switch piano flush button single pole one way 15/16 Amp 240 volt complete all as specified and as directed.

S&F in replacement of socket outlet flush type multipurpose 2 in 1, 3 pin 5/6 and 15/16 Amp, 230 volts complete all as specified and as directed.

S&F in replacement of unservicable socket outlet flush type multipurpose 2 in 1, 6pin 5 .Amp, 230 volts complete all as specified and as directed.

S&F in replacement of switch socket outlet combination flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and as directed.

S&F in replacement call bell AC single pole 240 volt ding dong type, complete all as specified and as directed.

S&F in replacement high range up to 40 mtr , cordless call bell with wireless remote including batteries complete all as specified and as directed.

S&F in replacement angle/batten type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement PVC gang box fitted with and including piano type switch 5 A and socket 5 A, 230 Volts complete with pvc gitties and screws complete all as specified and as directed.

S&F in replacement PVC gang box fitted with and including piano type switch 15 A and socket 15 A, 230 Volts complete with pvc gitties and screws complete all as specified and as directed.

M&L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .

Overhauling, repairing, reassembling, refixing, re-installation of water heaters / Geysers to their original position, making all necessary water & electric connections and testing complete all as specified and directed. Note :- (i) Labour for assembling of all old/ serviceable and new parts to make the geyser in serviceable conditionshall include in this items. (ii) Parts renewed shall be measured and paid spearately.

Supply only element 1.5 KW (ISI marked) suitable for geyser of 25 litres capacity, horizontal or vertical type any make complete all as specified and as directed.

Supply only heating element 2 KW (ISI marked) suitable for geyser of 50 litres capacity, horizontal or vertical type any make complete all as specified and as directed.

Supply only thermostat, minimum 300 mm long, suitable for any make & type of geyser 25 / 50 litres capacity horizontal or vertical type complete all as specified and as directed.

Supply only indicating lamp for geysers of any type make & capacity complete all as specified and as directed.

M&L for painting old surfaces of geysers of 25 litres capacity of any make with one coat of paint of approved shade or tint after necessary preparation to surfaces and writing of MES Nos as approved size of letter complete all as specified and as directed.

Supply only of PVC connection 15 mm dia with 2 Nos brass coupling, nuts from geyser inlet / outlet, 40 cm length suitable for 15 mm bore GI pipe complete all as specified and as directed.

Painting of exhaust fan 300 to 450 mm sweep AC 230 volts single phase complete with synthetic enamelled white/grey/matching paint by spraying one coat including filling of cavities after cleaning all dust and marking SM/MES NO with black enamelled paint, complete all as specified and as directed.

S&F in replacement ceiling fan 1200mm sweep, BEE star rated, copper wound, AC single phase, 230/240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and as directed.

Supply & fixing in replacement exhaust fan 300 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and as directed.

Supply & fixing in replacement exhaust fan 380 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified and as directed.

M&L in replacement Fresh air ventilator fan 230Volt, 50Hz, single phase AC supply, 250mm sweep with PVC louvers complete with PVC body and PVC blades and with and including provision of 3 core 1.5 Sq.mm flexible cable from ceiling rose to ventilating fan including writing MES number on fresh air ventilator fan motor using synthetic enamel paint of approved tint, complete all as specified and as directed.

Taking down and transporting to work shop for Rewinding for Rewinding of wall fan 450mm sweep AC 230 volts single phase with super enamelled copper wire of appropriate size including packing insulating material, soldering, varnishing, assembling and testing including transportation charges to and fro from contractor's workshop complete all as specified and as directed.

S&F in replacement chromium plated stop cock with brass spindle & with crutch or butterfly handle screwed down high pressure suitable for 15 mm bore GI tubing complete all as specified and as directed.

S&F in replacement Bib taps, cast copper alloy with crutch handle, screwed for 15 mm bore dia. Iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in replacement non-return valve, gun metal, suitable for 15 mm bore GI tubing complete all as specified and as directed.

S&F in replacement pressure releasing valve ISI marked as per sample ( 15 mm) complete all as specified and as directed.

Supply only copper tank verticle type suitable for 25 ltr Geyser complete all as specified and as directed.

Supply only copper tank verticle type suitable for 50 ltr Geyser complete all as specified and as directed.

S&F in replacement, installation testing and commissioning of storage type water heater 25 ltrs capacity , 5 Star rated , vertical mounting type complete made out of CRCA outer body, copper storage tank, heating element,thermostat,thermal cut out, glass wool etc. complete including making necessary electrical connections with suitable size copper multistranded cable complete all as specified and as directed.

S&F in replacement condenser/capacitor suitable for 230 volts single phase ceiling fan 1200mm /1400 sweep of any make and quality of capacity 2.5/3.15MFD, complete all as specified and as directed.

S&F in replacement Voltage stabilizer for automatic operation single phase intelligent Time Delay System, Compatible with Regular & Inverter ACs, Wall Mounting Cabinet Design, Energy efficient design, smart Digital Display, Built In Thermal Overload Protection Low & High Voltage Cut-off Protection, Latest IC Technology of capicit 05kVA, complete all as specified and as directed.

Disconnecting of ceiling fans / exhaust fan of any size from ceiling rose/connector for cleaning,servicing /oiling and greasing of fan by using appropriate grade of oil/grease and replacing defective parts such as bush bearing , split pin rubber bush, capacitor etc and rehanging the same after proper cleaning and making connection with ceiling fan/connector with flexible wire of size 23/0076 copper conductor multi stranded complete all as specified and as directed. (Note :- Parts/component will measuared and paid separtely under respective item of the schedules).

Rewinding of ceiling fan / exhaust fan of any size ,AC 230 volts single phase with super enamelled copper winding wire of appropriate/existing gauge/size including packing, insulating material soldering varnishing, assembling and testing including transportation charges to and fro from contractor's workshop complete all as specified and as directed.

Supply only bearing of ceiling fans for ceiling fans of 1200/1400mm sweep to suit for different makes of fans of approved quality including necessary greasing, complete all as specified and as directed.

Supply only bushes gun metal suitable for ceiling fans 1200/1400mm sweep complete all as specified and as directed.

Painting of ceiling fan 1200/1400mm sweep AC 230 volts single phase complete in situ or at contractor workshop with synthetic enamelled white/matching paint by spraying one cost including filling of cavities after cleaning all dust and marking SM/MES NO with black enamelled paint, complete all as specified and as directed.

NEXT POWER ENTERPRISES

M/S S.B. Singh and Sons

Shree Kanth Technologies

Ajanta Associates

M/S SHIVA CONSTRUCTION

OMVIN ENTERPRISES LLP

M/S AMARJIT SINGH