Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹51.9 L
EMD Value
₹1.0 L
Closing Date
16 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Construction of Concrete Drain from VIP Gate to Outside of Compound till Raja Kaluve at ARDC, HAL DC.
9536
TENDER NOTICE/NCP/24/24-25/04
Works
Contract Section Civil-FMD-Bangalore
₹0
₹1.0 L
16 Sept 2024
29 Aug 2024
29 Aug 2024
16 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains, pipes, cables, ramp sides etc. in all kinds of soils (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m for all lifts, with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as directed by Engineer-incharge.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members,drains as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m for all lifts with all labour, tools & tackles, plant & machinery, hire & fuel charges etc.,all complete as directed by Engineer-incharge.
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and for all lifts, all complete as directed by Engineer-incharge.
Providing, mixing and laying in position cement concrete (1:4:8) derived from natural sources of required thickness using 40 mm down graded hard stone/granite aggregate in accordance with IS 456 in all works up to plinth level, including mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc but excluding the cost of shuttering, all complete as directed by the Engineer-in-Charge.
Centering and shuttering for Plain Cement Concrete, including strutting, propping etc and removal of form work for Foundations, footings, bases for columns, all complete as directed by the Engineer-in-Charge.
Providing and laying in position ready mixed or site batched M25 Grade Reinforced cement concrete work with minimum cement content of 330 kg/m3 design mix cement concrete for all works upto plinth level including necessary openings and packing if any for laying pipes, cables etc.; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including smooth finishing, pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering and reinforcement as per direction of the engineer-in-charge. Note: (i) Site design mix to be obtained from Govt. / NABL laboratory for site batching concrete. (ii) Small quantity is as approved by EIC in volumetric proportion.
Formwork (Centering and shuttering including strutting, propping etc, and removal of form) for the following RCC members which are defined as below, in fair finished by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge for the sub-items mentioned below. Note : Formwork material is contractor's own property and shall be removed after completion of work.
Foundations, footings, bases of columns,plinth drain,ramp concrete, pedestal,drains, etc. for mass concrete
Walls (any thickness) including drains, attached pilasters, butteresses, plinth, haunches and string courses e.t.c.
Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note : a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry.
Structural steel work riveted, bolted or welded in built up sections, trusses, ladders, chequered plates, staircases and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by the Engineer in charge.
Painting Steel surfaces of any description with two coats of synthetic enamel paint of approved colour,brand and manufacture to give an even shade, including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth etc., all complete as directed by the Engineer-in-Charge.
Demolishing of Plain cement concrete of any description and in any position, manually/ by mechanical means including breaking to pieces of any thickness or volume, if necessary and disposal of demolished/ rubbish/ unserviceable/ dismantled or waste material (Except saleable materials) upto a total lead of 10.00 kms for all lifts, all complete as per direction of Engineer-in-Charge.
Demolishing /Dismantling of stone rubble masonry built in Cement mortar manually/ by mechanical means including stacking of serviceable material at required designated place and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
Demolition of reinforced cement concrete work of any description and in any position manually/ by mechanical means using pneumatic tools, breaking to pieces of any thickness or volume, if necessary stockpiling and stacking servicable and unservicable materials seperately at designated locations and disposal of demolished/ rubbish/ unserviceable/ dismantled or waste material (Except saleable materials) by mechanical transport outside HAL upto a total lead of 1 kms for all lifts, including cutting reinforcement bars, all complete as directed by the Engineer-in-Charge.
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
Rupees Forty Four Lakh One Thousand One Hundred Forty Eight and Sixty Two Paise Only
Approximate Amount Put to Tender
Rupees Seven Lakh Ninety Two Thousand Two Hundred Six and Seventy Five Paise Only
Rupees Fifty One Lakh Ninety Three Thousand Three Hundred Fifty Five and Thirty Seven Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN24.pdf
TENDER_DOCUMENT • 2.36 MB
45PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
45PQ.pdf
TENDER_DOCUMENT • 0.21 MB
45TenderDawing.pdf
TENDER_DOCUMENT • 0.17 MB
45PBF.xlsm
TENDER_DOCUMENT • 0.03 MB
45ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
45Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
45TB.pdf
TENDER_DOCUMENT • 2.58 MB
45PB.pdf
TENDER_DOCUMENT • 0.30 MB
45Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
Amendment.pdf
TENDER_DOCUMENT • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .