ANNUAL MAINTENANCE WORK OF NCC DTE BLDGS AND NCC OFFICERS MESS UNDER GE CHENNAI

Amount

Supply only liquid water proofing compound conforming to IS: 2645-2003 all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, kerbs, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

M&L for precast RCC (1:1½:3) type A-1 using 20mm graded aggregate as in manhole covers, landings etc. with plain faces set in cement mortar (1:4) complete all as specified and directed.

M&L for brick work straight or curved on plan exceeding 6 metre mean radius using old size fly ash bricks built in cement mortar (1:6) all as specified and directed.

M&L for brick work in half brick thick walls straight or curved on plan to any radius using old size fly ash bricks built in cement mortar (1:4) all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings exc 1.5sqm and n exc 4 sqm each

S&F aluminium powder coated designer curtain rods (draw berms rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws including taking down the existing curtain rod of any description complete all as specified and directed.

S&F aluminium powder coated designer brackets for curtain rod suitable for aluminium powder coated designer curtain rod all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples including taking out old damaged wire mesh with beading etc. complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodized aluminium frame for doors, windows, partitions, ventilators etc. with one or more rebates including joining cleats for fixing complete all as specified and directed.

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) side hung/ sliding window of aluminium section for frame work not less than 0.55 Kg/ RM including necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beads, screws, rollers, inter locking handles, 01 No. aluminium peg stay 150mm long, 02 No. hinges B-2 100mm long for sliding window complete all as specified and directed. Note: Glass panes and wire mesh will be measured and paid for separately.

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter of aluminium section for frame work not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, stainless steel butt hinges 03 Nos. 100mm long and Partly glazed with 4mm thick tinted glass and partly with 12mm thick pre-laminated sheet including anodised aluminium snap beads, screws etc. complete all as specified and directed. Note: Sheet glass and pre-laminated sheet will be measured and paid for separately.

S&F aluminium anodised powder coated (minimum thickness of powder coating 50 micron) window security grills with frame 6mm thick 75mm aperture fixed with joining cleats or riveted to panel of window frame complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F in repairs aluminium (Die cast) body door closer hydraulically regulated, designate No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering/ chajja, fixed with self tapping screws as per manufacturer’s instructions complete all as specified and directed.

S&F rolled mild steel roof trusses (framed), trussed purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L providing Gypsum board false ceiling using 9mm thick Gypsum board tiles of size 60cm x 60cm with aluminium laminate finish on one side and vinyl laminate finish on other side, fixed with screw on galvanised iron snap grid frame work using 'T' and angle sections made out of 0.50mm thick PGI sheet, class V bent to shape required as in main member, secondary members, perimeter angle section including provision of GI wire suspender of size not less than 4mm dia fixed to roof members @ 1200mm c/c both ways complete all as specified and directed. Note: The quoted unit rate shall be deemed to include the cost of taking down and re-fixing of the electrical fittings such as ceiling fan, light fittings etc. and safe custody of same till re-fixing complete.

S&F pre-laminated particle board 9mm thick, interior grade pre-laminated on both sides with decorative choice laminations and fixed to timber frame work with screws complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.

Material and labour for coloured Vitrified Ceramic tiles of grade B-I (a),10 mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 sqm, laid in floors of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

All as per Item No. 21.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles of approved colour and pattern exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles of approved colour and pattern exc. 0.11 Sqm but not exc. 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

All as per Item No. 24.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick backing in cement mortar (1:3) complete.

M & L glazed coloured ceramic tiles in vertical surfaces of size 300x200x7 / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match floor tile over a backing coat in Cement Mortar 1:3, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed by the Engineer-in-Charge.

M&L plain cement concrete as roof padding, type B0, 1:2:4 (12.5 mm graded aggregate), 40mm average thick mixed with PIDI PROOF LW at the rate of 200ml per bag of cement.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: Liquid water proofing compound (PIDI PROOF LW) shall be measured and paid for separately.

M&L rendering 10mm thick in cement mortar (1:3) as on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer including over and including application of 2 to 3mm thick wall care putty complete all as specified and directed.

M&L preparation of new surface and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for applying one coat of white wash to ceiling including preparation of old decorated surfaces complete all as specified and directed.

M&L for compete removal of existing treatment with electric operated blade, washing, rubbing down and stopping of distempered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer including applying wall care putty of 2 to 3 mm thick on old surfaces all as directed and specified.

M&L for complete removal of existing treatment with electric operated blade, washing, rubbing down and stopping of distempered surfaces of wall and applying one coat of oil bound distemper complete all as directed and specified.

M&L for complete removal of existing treatment and washing with water and bleaching powder solution, and applying two or more coats of 100% Premium acrylic amulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old decorated plastered surfaces complete.

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares exc. 0.50 Sqm in each pane complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

All as per item No. 43.00 above but 20mm bore.

All as per item No. 43.00 above but 25mm bore.

S&F 3mm thick PVC sheet, laminated plain coloured, marbled mosaic or marbled finish, laid with approved rubber based adhesive in floors complete all as specified and directed.

S&F in repairs PVC (SWR) single socketed in any length with rubber ring joints laid in trenches or in floors of 110 mm dia internal bore complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) bend any radius all as specified and directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including joining with solvent cement 100mm dia of outlet complete all as specified and directed.

S&F in repair 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

S&F PVC low level flushing cistern 10 ltr with complete accessories such as PVC flush pipe, over flow pipe etc. fixed in repairs complete all as specified and directed.

S&F in repairs PTMT grating round 140mm dia all as specified and directed. Make: Prayag Cat No. 114 or equivalent from other makes specified in particular specifications.

S&F in repairs health faucet (hand shower with 1 M flexible tube with wall hook, chromium plated as per Cat No 563 of Jaguar or equivalent of HR, Johnson/Parryware all as specified and as directed by the Engineeer in charge.

S&F in repairs overhead shower 180mm dia round shape single flow (ABS body chromium plated with grey face plate) with rubit cleaning system with and including shower arm casted 190mm long light body round shape with flange complete all as specified and directed. Make: Jaquar Cat No. OHS-1759 (shower) and SHA-477 (Arm) or equivalent from other makes specified in particular specifications.

S&F in repairs for 15 mm bore pillar tap chromium plated long neck with aerator fancy type with crutch handle screwed down high pressure with long screwed shanks and fly nuts srewed for iron pipes or for brass ferrule as per catalouge No.CON-021 of JAQUAR fixed in repairs all as specified and directed.

S&F in repairs corner glass shelf 300mm, matt finished, chromium plated (MCH/ Colour CP) with bracket as per Cat No. ACN-1173 of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F for 15 mm bore bib taps fancy type,chromium plated screwed down for pipes or brass ferrule fixed as in repairs all as specified and directed.

S&F 20mm dia tubular towel rail 'D' type 60cm long brass chromium plated fixed in repairs complete all as specified and directed.

S & F in repairs Stainless steel plate rack of size 24X36X10 inch fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface all as specified and directed by GE . Make PRAYAG or equivalent

S & F in repairs Vitreous china bowl urinal flat back, size of 465x355x265 mm white(minimum), with grating and union for discharge pipe and waste pipe) complete all as specified and directed.

S&F Vitreous chain wash basin of size 600 x 450mm of Make Parryware Cube model Cat No-C844E including waste coupling, waste pipe and brackets etc all as specified and directed by engr in charge

S&F Vitreous china wash down water closet, pedestal pattern, white including white coloured PVC seat cover (excluding fixing bolts flushing cistern and flush pipe) and fixed in repairs all as specified and directed.

S&F Vitreous china wash basin white flat back size 550x400mm including CI brackets and 32mm waste coupling and waste pipe, etc., complete fixed in repairs all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 1000 litres complete including dismantling existing tank of any description.

Supply and fix plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device fixed in repairs complete all as specified and directed.

S&F in repair 600mm x 450mm bevelled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

Cutting down vegetation growths like plants/ trees of girth n. exc 15cm from roof tops/ sides, external walls of bldgs, chajjas, wall juctions at junction of rain water/ CI waste water pipe junctions including removal of roots and taking out carefully possible quality of concrete in roofs embedded in walls/ slab surfaces making good affected locations and applying TUFALO chemical (herbal medicine or Glyphosate Herbicide/equivalent) to arrest further growth and making good the distrubed surfaces with PCC (1:2:4) type B-1 or CM 1:2 all as specified and directed by the Engr-in-Charge. Note : The unit rate quoted shall be deemed to include the cost of scaffoloding/ staging etc.,

M&L for APP modified prefabricated polymeric membrane, 3mm thick of weight not less than 3.6Kg/Sqm reinforced with non woven polyester matt, black finished on cold sticker and torch application of membrane with 10cm over lap after necessary preparation of roof surface including water proofing treatment consisting of the following all as specified:- (i) 10 mm thick rendering with CM 1:4 on roof slab with WPC. (ii) One coat of bitumen primer @ 0.40 Kg/Sqm. (iii) One coat of bonding material of blown type bitumen of grade 85/25 heated with working temperature of 180 degree Cent and applied @ 1.20 Kg /Sqm of the surface area. (iv) A layer of APP modified polymeric membrane of specified thickness and weight. (v) Top most layer of surface finished with one coat of heat resisting aluminium paint @ 0.10 ltr/Sqm

Demolition of brick masonary built in cement mortar including all quions, arches, pillars etc but including ashlars facings, dressed stone work and precast concrete articles all as specified and directed.

Dismantling of asbestos cement (corrugated or semi corrugated etc.) sheets in roof covering all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc. or insulation boards/ slabs, blankets; of any thickness including cover fillets complete all as specified and directed.

Demolition of Concrete of any description incl any type of roof any description and in any position not otherwise specifically provided for rincluding removal of debris out side MD lands.

Dismantling of un-framed structural steel work of any description not otherwise specifically provided for complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cabel of 1100V grade drawn through new non metallic rigid PVC conduit including accessories, concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing the switchs, sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly all as specified and directed :-

One light point controlled by one switch.

One fan point controlled by one switch through regulator.

One 3 pin socket outlet, 5amps on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5amps on independent board controlled by one switch.

One light point controlled by two No. 2-way switches.

One bell/ buzzer point controlled by one bell push.

All as per item No 75 Above but with 2.5 sqmm cable size (two run and one run for earthing ) for one 15 amps switch socket outlet

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multistranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new PVC casing capping, ISI marked, with accessories fixed on wall/ floor and fixed on ceiling/ roof etc, including new pressed steel terminal boxes 1.6mm thick, concealed in walls covered with 3mm thick plastic laminated sheet cover for housing the switch sockets, outlets, fan regulator etc. fixed with cadmium plated screws including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc. including taking down existing point wiring complete all as specified and directed for :-

One light point controlled by one switch.

One fan point controlled by one switch through regulator.

One 3 pin socket outlet, 5amps on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5amps on independent board controlled by one switch.

One bell/ buzzer point controlled by one bell push.

All as per item No. 77 Above but with 2.5 sqmm cable size (two run and one run for earthing ) for one 15 amps switch socket outlet complete all as specified and directed.

S& F for modular metal flush box 2 module complete all as specified and directed by Engr-in-Charge

S& F for modular metal flush box 4 module complete all as specified and directed by Engr-in-Charge

S& F for modular metal flush box 6 module complete all as specified and directed by Engr-in-Charge

S& F for modular cover plate with frame 2 module complete all as specified and directed by Engr-in-Charge

S& F for modular cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge

S& F for modular cover plate with frame 6 module complete all as specified and directed by Engr-in-Charge

S&F modular switches suitable for type AC 240V, 6 amps 1 module and including taking down of old damaged/ unserviceable switches complete all as specified and directed.

S&F modular sockets suitable for type AC 240V, 6 amps 2 module and including taking down of old damaged/ unserviceable sockets complete all as specified and directed.

S&F modular switches two way suitable for type AC 240V, 6 amps 1 module and including taking down of old damaged/ unserviceable switches complete all as specified and directed.

S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F modular power sockets suitable for type AC 240V, 16 amps 2 module and including taking down of old damaged/ unserviceable socket complete all as specified and directed.

S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed by Engr-in-Charge

S&F modular bell switch suitable for type AC 240V, 16 amps and including taking down of old damaged/ unserviceable switches complete all as specified and directed.

S&F call bell of multi music type A/C 230 volts and including taking down of old damaged/ unserviceable bell complete all as specified and directed.

S&F ceiling rose, polycarbonate, isolated body with 2 to 3 terminals and including taking down of old damaged/ unserviceable ceiling rose complete all as specified and directed.

Taking down the existing fan after disconneting the supply and rewinding of ceiling fan with suitable gauge of enamelled copper winding wire including insulating with suitable class of insulating varnish , servicing of fan by replacing wornout bearing and bushes including painting of fan and blades with two coats of synthetic enamel paint and writing MES numbers, re fixing the fan , conneting with their cord flexible cable from ceiling rose to fan and testing complete all as specified and directed.

Taking down the existing fan after disconneting the supply and rewinding of Exhaust fan with suitable gauge of enamelled copper winding wire including insulating with suitable class of insulating varnish , servicing of fan by replacing wornout bearing and bushes including painting of fan and blades with two coats of synthetic enamel paint and writing MES numbers, re fixing the fan , conneting with their cord flexible cable from ceiling rose to fan and testing complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for batten fittings/ angle holder as required including taking down old damaged lamp holder complete all as specified and directed.

S&F of LED bulb 9 w high suitable for lamp holder complete all as specified and as directed by the Engineer-in-Charge. Make : Havells/CG/Philips /Wipro

Supply and fix 20Watts LED light fitting, basic all purpose surface and wall mounted LED batten 20Watts with aluminium housing and integrated electronic driver including 20W LED tube - 1No on surfaces of wall or ceiling including taking down the old fitting complete all as specified and as directed by the Engineer-in-Charge. Make Crompton Cat No CCS-103-20-65-SL-DP-NWH or equivalent to /Philips /Wipro/Havells

Supply and fix 10Watts LED light fitting, basic all purpose surface and wall mounted LED batten 10Watts with aluminium housing and integrated electronic driver including 20W LED tube - 1No on surfaces of wall or ceiling including taking down the old fitting complete all as specified and as directed by the Engineer-in-Charge Make Cropton Cat No CCS-103-10-65-SL-DP-NWH or equivalent to /Philips /Wipro/Havells

Supply and fix 36 Watts 2X2 ceiling light Environment friendly, new generation, aesthatically, ultra modern designed Recess mounting luminaire with high brightness SMD LEDs as light source suitable for Armstrong/Grid ceiling including taking down the old fitting complete all as specified and as directed by the Engineer-in-Charge. Make Crompton Cat No LCDTLRF7-36-CDL or equivalent to /Philips /Wipro/Havells

S&F switch piano flush type 5 amps single pole one way including taking down complete all as specified and directed by Engr-in Charge

S&F switch piano flush type 5 amps single pole two way switch including taking down complete all as specified and directed by Engr-in Charge

S&F socket outlet 2 in 1, 3pin 5 amps 230 volts including taking down old one complete all as specified and directed by Engr-in Charge

S&F switch piano flush type 15 amps single pole one way including taking down old one complete all as specified and directed by Engr-in Charge

S&F socket outlet 3 pin, 15 Amp, flush type including taking down old one complete all as specified and directed by Engr-in Charge

S&F bell push 5 amps 230 volts flush type including taking down old one complete all as specified and directed by Engr-in Charge

S&F Electronic fan regulator dimmer type, 450w , 250 volt including taking down old one complete all as specified and directed by Engr-in Charge

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor including connecting with flexible wire fan to ceiling rose after disconnetion from ceiling rose and fan deposite to E/M Yard complete all as specified and directed by Engr -in charge.

Supply and fix exhaust fan, steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers including connecting with flexible wire fan to ceiling rose after disconnetion from ceiling rose and fan deposite to E/M Yard complete all as specified and directed by Engr -in charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and old geyser deposite to E/M Yard complete all as specified and directed by Engr -in charge.

M&L for submain wiring with two runs of 4.0 Sqmm multistranded, PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC casing capping in walls alongwith accessories, fixed on walls/ floors/ ceilings etc. with one run of 4.0 Sqmm PVC insulated unsheathed solid copper conductor cable of green colour as earth continuity conductor and connecting to common earth dolly including taking down old unserviceable submain wiring complete all as specified and directed. Note: Two runs of 4.0 Sqmm multistranded cable and one run of 4.0 Sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

M&L for submain wiring with two runs of 6.0 Sqmm multistranded, PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC casing capping in walls alongwith accessories, fixed on walls/ floors/ ceilings etc. with one run of 6.0 Sqmm PVC insulated unsheathed solid copper conductor cable of green colour as earth continuity conductor and connecting to common earth dolly including taking down old unserviceable submain wiring complete all as specified and directed. Note : Two runs of 6.0 Sqmm multistranded cable and one run of 6.0 Sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

S&F sub main wiring complete with four runs of 10 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe surface in wall alongwith accessories fixed on walls/floors/ceiling and including existing sub main wiring taking down complete with one run of 10 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note :- Two runs of PVC insulated cable 10 sqmm + one run 10 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F sub main wiring complete with four runs of 10 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe surface in wall alongwith accessories fixed on walls/floors/ceiling and including existing sub main wiring taking down complete with one run of 10 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note :- four runs of PVC insulated cable 10 sqmm + two run 10 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240volt 8 way MCCB DB, TPN with 200 Amp rated bus bar shall conform to IP 38 protection incluidng taking down the old one.

S&F MCCB 415V, 4 pole 50HZ fixed thermal setting of capacity 100 Amps 16 KA including taking out old u/s one

S&F MCB of SPN of rating 63 Amps including taking down the old one.

S&F MCB distribution board made of CRCA sheet, powder coated paint conforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240volt 8 way MCB DB, SPN with 200 Amp rated bus bar shall confirm to IP 38 protection incluidng taking down the old one.

S&F MCB of rating 240 Volts, C curve SPN 40 Amps including taking down the old one.

S&F MCB of Single pole of rating 6 to 32 Amps C curve including taking down the old one.

S&F for modular 25 Amp motor starter switch with w module one piece including indication both red and green complete all as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4 mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified inlcuding testing on completion.

Taking down the existing fan after disconneting the supply and rewinding of Ceiling fan with servicing of fan by replacing wornout bearing and bushes including painting of fan and blades with two coats of synthtic enamel paint and writing MES numbers, re fixing the fan , conneting with their cord flexible cable from ceiling rose to fan and testing complete.

Taking down the existing fan after disconneting the supply and rewinding of Exhaust fan with servicing of fan by replacing wornout bearing and bushes including painting of fan and blades with two coats of synthtic enamel paint and writing MES numbers, re fixing the fan , conneting with their cord flexible cable from ceiling rose to fan and testing complete

Taking down the geyser of 25/50 Ltrs capacity after disconting the power supply and scaling of geyser by descaling the inner tank with diluted hydrochloric acid , checking of heating element and thermostate complete including painting of geyser with two coats of synthetic enamel paint and refixing the geyser connecting with 3 core flexible cord from plug point to geyser and testing complete.

Supply only Heating element 1.5 KW capacity suitable for AC single phase 50Hz, 230 Volts suitable for geysers for thread type/press type/ traingular/circular type including taking down the old one complete all as directed.

Supply only thermostat automatic cut off with ISI mark suitable to geysers of any range from 20 degree C to 90 degree C including taking down the old one complete all as directed.

Supply only hot water line, steel guarded PVC connection pipe 450mm long with self locking nut at both ends, 15mm bore including taking down the old one complete all as directed.

Supply only cold water lines, PVC connecting pipe 450mm long with self locking nut at both ends, 15mm bore including taking down the old one complete all as directed.

Supply only phase indicating neon lamp round type or rectangular type suitable for AC, single phase 230 volts, 50Sz and suitable for respective make of the geysers and including taking down of old damaged/unserviceabe complete all as directed. Note: Two Nos of lamp contain green and red colour shall be counted as one unit.

SIRITEL SYSTEMS PRIVATE LIMITED