TP1-156/2025-26 OF CE/TP-I/CNI

Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for in hard gravelly soil

PCC 1:3:6 using 20 mm HBG metal for foundation including cost of cement without formwork all materials, labour, lead, lift etc. complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour, lead, lift, curing, etc., complete.

Plastering with CM 1:5, 12 mm thick for walls including cost of all materials, curing, labour, lead, lift, etc., complete.

Supplying and fixing of colour Europian type water closet with flushing cistern of Neycer/Parry ware with P"" or "S" trap, seat cover 15 mm dia connecting hos. 2 nos 15 mm dia CP angle valve, hand shower -1 No. including cost of all materials, lead, lift, etc., complete as directed by department Engineer at site

Supplying and fixing in position IWC ORISSA PAN of size 580 X 420 mm colour glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc., complete.

Supply and fixing of white colour wash basin of size 550 x 400 mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug and chain, 32 mm dia 'B' Class G.I. waste pipe etc., 15 mm dia GM wheel valve, 15 mm dia nylon connection, complete.

Supplying and fixing in position 165 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete

Supplying and filling with 40 mm HBG metal in dispersion trench, rain water harvesting pit, transformer oil drain pit including cost of metal, all labour, lead, lift, consolidation, etc.,complete.

Supply and fixing 110mm dia PVC down fall pipe 4 kg/cm2 avonplast or Finolex make with required bend, tee and GI wall clamp at 90cm intervals including cost of materials, labour, lead, lift, etc., complete.

Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 40 mm dia

Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 32 mm dia

Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 25 mm dia

Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 20 mm dia

Providing and fixing Gate valve of 40 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site.

Providing and fixing Gate valve of 32 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site.

Providing and fixing wheel valve of 32 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing the name/ designation stickers in doors identifying the rooms including cost of material, labour, etc., complete.

Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.

Supplying and fixing Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all materials, leads, lift, etc., complete

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification.

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications.

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and erection of 2HP mono block 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Design, Manufacturing, Supplying, Transporting and fixing of western mobile toilet & wash basin in room size of 4' x 4' X 7 ' feet ht including preparing the platform for fixing, and connecting the sewer line with existing line, providing necessary water line including cost of all men, material, lead and lift etc., as driected by the department engineer at site.,

Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point (forelectronic regulator)

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5 sq.mm copper wire with painting of suitable colour

Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point

Wiring with 2 x 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supplying and fixing box type 4'-40 w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with T.W. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings

Supplying and fixing of water tight Bulk head fitting with guard and approved suitable make for incondescent lamp with guard and 100 w bulb.

Supply and fixing of 1400 mm sweep (56") AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod including fan clamp with side plates and cross arm of size 450 mm.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make).

Supplying and installation of split Air Conditioner (3 phase - 2.0 TR Split Type AC Unit ) of approved make 5 Star Rated Inverter (Carrier / Voltas / O General/ Equivalent) with all accessories including stabilizer ( V guard) with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete.

Supply and fixing of 32 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make]

Supplying and laying of 4 core 16 Sqmm copper control cable including cost of cable, lead, lift, labour charge, etc., complete.

Supplying and fixing of 4 pole Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and laying 25 mm dia 10 kg PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and laying of 5/8" copper pipe (Extra beyond 3 metres supplied with AC unit) for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete.

Thorough scrapping of old plastered surface in and out side of the quarters for painting including cost of all materials lead lift etc complete.

White washing 2 coats using emulsion paint over one coat of primer with white colour for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete.

Painting inside & out side walls with two coats of best quality exterior emulsion over primer one coat of approved colour including cost of all materials and scaffolding etc. complete.

Painting inside & outside of wooden doors and windows with two coats of best quality Synthetic Enamel Paint for Wood Work e of approved colour including cost of all materials and scaffolding etc. complete.

Applying of Solar reflective Paint, acrylic polymer based elastometric water proofing coating having Solar Reflective Index more than 90 % as per ASTM E 903, specific Gravity of 1.30+/-0.10. Surface: The Surface Preparation including Jet wash, the Cracks are filled wherever required below 3mm of crack and application of three coats of paint to form 1mm thickness including cost of all materials and scaffolding etc. complete.

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8 mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20 mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. ( sample to be approved by Dept.Engineer)

Flooring with approved ceramic tiles 305mmx305 mm non slipery over cement mortor 1:3 20 mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete ( sample to be approved by Dept.Engineer)

Dadooing walls with approved quality of Glazed tils of size 300x200 laied in cement mortor 1:2 10mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete( sample to be approved by Dept.Engineer)

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [MDF exterior grade] and 5mm thick machine frosted float glass (modi, saint gobine or Equivalent) using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, lift, T&P etc., complete.

Supply and installation of Anutone (or) Equivalent Brand ofAcoustical False Ceiling of Sisoli Serene / Slate Spirts / SlatePolka Mineral Fibre/ GRG Core Ceiling Tiles of size 595 x 595x 15mm having volume density 270 kgs / m3, weight 4 kg /m2 which is suspended by using 0.3mm thick skelet trelis T15metal grid system. The skelet trelis T15 metal grid system of600 x 600mm module includes skelet WA15 W30 wall anglewith unequal flanges of 15 / 19mm, length 3000mm, fixedalong the perimeter of walls with the help of nylon sleeves andsuitable fasteners at 300mm centers. Then suspend the skeletMT15 W36 MainT with flange width 15mm, height 32mm andlength 3600mm, from the soffit slab with help of soffit cleat andwire rod with leveling spring clip at 1200mm centres. SkeletCT15 W12 CrossT with flange width 15mm, height 26mm andlength 1200mm is interlocked into the pre-cut slots in the MainT15 at 600mm centers in the perpendicular direction to theMain T15. Finally skelet CT15 W06 CrossT with flange width15mm, height 26mm and length 600mm are interlocked intothe precut slots in the CT15 W12 CrossT in direction parallel tothe Main T15 to result in 600 x 600mm module. Sisoli Serene/ Slate Spirts / Slate Polka of size 595 x 595 x 15mm shall beplaced into the grid size of 600 x 600mm. The systems toachieve noise reduction coefficient not less than 0.5 NRC, soas to have an neat appearance s directed by the departmentoffices. The cost includes, cost of material, cost of labour,Scaffolding, transportation, conveyance, etc., complying tostandard specication.

Supplying and fixing at anodized aluminium door using 101.60x44.45x2.10 mm @1.608 kg/m box section for outer frame. 53.70x44.45x2.30 @ 1.238 kg/m door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 9mm thick regular grade pre laminated particle board & top panel with 5.5mm thick clear glass including cost of alum. Clips rubber beedings alum. Fixtures such as tower bolt, pivot brass mortice lock handle,with hydralick Door closer etc. of approved quality including cost of all materials, labour, leads, lift etc. complete (1.00mx2.20msize single leaf)

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials, lead, lift, etc., complete.

Supply and fixing in position of anodized aluminium glazed sliding window as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5.50mm thick sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete.

supply and fixing of Pre-Painted Galvanized Iron Fixed Louvered Ventilators with Glass and Grill Providing and fixing louvered ventilator fabricated from roll formed sections made of galvanized steel colour coated / powder coated (Base steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.58mm.

Clearing Heavy jungle and disposing off to a place away from the site as directed by the Engineer in charge including all labour charges, T&Ps etc., complete.

Paving the approach to building, sides of roads, between building and setback area with Pave-it Rubber Moulded Hydraulic Pressed Paver interlocking block of 83mm thick of approved quality and colour over 100mm thick bed of filling sandcompacting properly with surface vibrator finishing neatly including cost of all materials, labour, T&P, lead, lift etc. complete.

Supplying and fixing of MS structural steel section ( ISI) suitable for supporting the metal roofing sheet for cycle shed roof and Flag post including cost of all materials, labour charges, with painting two coats over one coat of priming etc complete

Supplying and fixing of metal roofing sheet 0.47mm tk over MS structural section with necessary screws including cost of all materials, labour for fixing lead, lift, with painting two coats over one coat of primeing etc complete.

Cleaning and removing of the dust from the existing road with air compressor including cost of all materials labour lead lift etc complete.

Providing and laying Tack Coat over surface treated with primer using 2.50 kgs. of bitumen emulsion for 10 sqm.area including cost and conveyance of bituminous binder including labour charges, applying the required quantity of bitumen emulsion as tack coat by bitumen sprayer etc., complete as per clause 503 of MOST specification.

Providing and laying Bituminous macadam 100 mm consolidated thickness using bitumen 60/70 gradeas per clause 504of MoRTH specification including cost of all materilas, lead, lift , etc, complete.

Providing and laying Semi Dense Bituminous Concrete / seal coat of 25 mm consolidated thickness using 60/70 grade bitumen per clause 508 of MoRTH specification including cost of all materilas, lead, lift , etc, complete.

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For S Type chair (Local rate)

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For Three drawer steel table with Sunmica top of size 1200x750x750mm

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For Steel side rack open type 1100x400x1200

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For Steel half bench 1200x400x600mm

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For PVC Nylon chair of approved quality

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. Revolving Chair with leather as directed by the Engineer-in-charge at site.

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. Executive Table 6'x5' with glass on top for EE office as directed by the Engineer-in-charge at site.

Executive Table 6'x5' with glass on top for CE office as directed by the Engineer-in-charge at site.

CGST in % (For Bidders inside TamilNadu)

SGST in % (For Bidders inside TamilNadu)

IGST in % (For Bidders outside TamilNadu)

Please Enable Macros to View BoQ information