SPECIAL REPAIRS TO BDY WALL OF OFFRS MD ACCN NEXT TO AFI BLDG, NAGPUR.

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and disposal off demolished material and rubbish out of the premises MD land, complete all as specified and as directed

Demolition of Precast Jafri jali of un-reinforced cement concrete in ground floors and pavings not exceeding 15cm thickness (Below or above GL), and disposal off demolished material and rubbish out of the premises MD land, complete all as specified and as directed

Demolition of Posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good the disturbed ground, complete all as specified and as directed

Excavation in post holes (or Similar holes) exc 0.50 cum, getting out in soft/loose soils, returning, filling in and ramming earth or broken rubble mixed with earth aruond, in layers not exc 25 cm, watering and removing surplus soils to a distance n exc 50m and making good surface, all as specified and as directed.

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in soft/loose soil all as specified and as directed.

Returning filling in, including spreading, leveling watering and well ramming in layers not exc 25 cms thick with soil all as specified and as directed.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded granite stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.

Material & labour Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No.10 above, but 5mm and over upto and including 10mm dia TMT bars as in stirrups, spacers and binders.

M&L for RCC 1 : 1½ : 3 Type A1 (nominal mix) using 20mm graded stone aggregate as in foundations, footings, foundation beams, plinth beams, bases for columns, basement of slabs and mass concrete etc., complete all as specified and as directed.

M&L for RCC 1 : 1½ : 3 Type A1 (nominal mix) using 20mm graded stone aggregate as in Columns, Pillars, piers, posts and struts etc., complete all as specified and as directed.

M&L for RCC 1 : 1½ : 3 Type A1 (nominal mix) using 20mm graded stone aggregate as in beams and lintels etc., complete all as specified and as directed.

Use and waste of form work to the sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works, vertical or to batter, rough finished flat surfaces of concrete etc., complete all as specified and as directed.

Use and waste of form work to the sides and soffits of floors or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shalves including supports, overhangs etc., also splays between floors and beams etc., rough finished flat surfaces of concrete etc., complete all as specified and as directed.

Use and waste of form work to the sides of pillars, posts, struts, piers, columns and stanchions etc., rough finished flat surfaces of concrete etc., complete all as specified and as directed.

M&L for brick work with fly ash brick, straight or curved on plan old size straight or curved on plan exc. 6m mean radius built in CM (1:6), complete all as specified and directed.

M&L for Rendering 15 mm thick in CM 1:4 on fair faces of brick masonry or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

S & F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm centre to centre spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins, etc., complete all as specified and as directed. Note: Each line of wire shall be measured as single length.

M&L for PCC 1 : 2 : 4 Type B1 (nominal mix) using 40mm graded stone aggregate as in foundations as mass concrete etc., complete all as specified and as directed.

Material & labour for preparation of new plastered surfaces of wall & applying two coats of cement base paint over a coat of primer of approved make complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F mild steel work as in angle iron posts and struts of size 50mmx50mmx6mm as in fencing including cutting tops to shape as directed, notching for wire, flat iron fillets (for securing wire mesh etc.,) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S & F Framed work such as doors or gates of angle or other section with gusset plates, rails, braces, etc.. complete, drilled for fixing of sheeting or other covering doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of sheeting or other covering, running rails and guides) and hanging, also fastening, fixing and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified and directed by Engineer-in-Charge.

M&L for Providing precast cement concrete (1:2:4) type B-0 by using 12.50mm graded stone aggregate, set in cement mortar 1:4, as in louvres and jallies, 25mm thick (measured solid), including all balluster, post, square/rectangular and mouldings etc., complete all as specified and as directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 56,352.00 /- ]

Meet Road Lines

M/s S. S. MUNDE

Vishwakarma Engineering Works

Bidder Name

Meet Road Lines

Vishwakarma Engineering Works

DEESHA CONSTRUCTIONS

M/s S. S. MUNDE