Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC M 92 PANCHSHEEL GARDEN NAVEEN SHAHDARA DELHI DELHI 110032 | SHAHDARA | DELHI | 110032 | L1 | Accepted-AOC L-1 | |
| 2 | L2₹16.3 L+₹30,760 (1.93%)Rejected-Finance 24 GROUND FLOOR PUJIT PLAZA SECTOR 11 CBD BELAPUR NAVI MUMBAI 400614 | THANE | MAHARASHTRA | 400614 | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Submitted documents is not as per NIT |
| Sl No | Description | Qty | Unit | Vinayak Infra Signs and Projects Pvt Ltd L2 | GARIMA SALES CORPORATION L1 |
|---|---|---|---|---|---|
| 1.00 | Entry/Exit Announcer
Drg. No. - Refer design drawing 1.6bS, 1.6bG
Providing and fixing Non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. All exterior signs should be manufactured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used.
Sign Portal :
Type B: 50mm deep portal has to be fabricated from 3 mm thick Yellow Aluminium Composit Panel with 0.25 mm PVDF, exterior grade with manufacturers warranty and test certficate from principle OEM from ALUDECOR / ALUCOBOND /EUROBOND or equivalent make, The internal structural frame to be made from 50 X 25 x 2 mm aluminium box section.
Sign Letters :
Providing and fixing Primary channel letters 50mm thk and Secondary profile cut letters 10mm thk, 3D cut letters in black glossy acrylic. All the letters would be made in profile to achieve true right angle. All mounting would be done in true plumb and using templet, keeping the alignment of the letters in one level | 2 | Job | 50,000 ₹1,00,000 Lowest | 90,000 ₹1,80,000 |
| 2.002.1 a - Ceiling Hung Directional Sign Refer design drawing 2.1aS, 2.1aG Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign face Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame : Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system on one side and 3M double side tape from the other side. The panel should be made easily openable for maintenance. Suspender : Providing and fixing Stainless steel 35 x 35mm Hollow sections (assuming typical length of 1 meter) mounted on slabs/beams/walls. Lighting : All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site | |||||
| 2.01 | Message - 1 | 10 | Job | 18,000 ₹1,80,000 Lowest | 24,300 ₹2,43,000 |
| 2.02 | Message - 2 | 5 | Job | 27,000 ₹1,35,000 Lowest | 33,300 ₹1,66,500 |
| 2.03 | Message - 3 | 3 | Job | 35,000 ₹1,05,000 Lowest | 54,000 ₹1,62,000 |
| 3.00 | 2.2a - Wall Mounted Facility Announcer
Drg. No. - Refer design drawing 2.2a-S, 2.2a-G
Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge
Sign face
Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge.
Sign Frame:
Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system on one side and 3M double side tape from the other side. The panel should be made easily openable for maintenance.
Lighting:
All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site.
Accessories:
Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. | 2 | Job | 17,000 ₹34,000 Lowest | 18,000 ₹36,000 |
| 4.002.2d-1 Counter mounted facility Announcer Drg. No. Refer design drawing 2.2d-1G Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign face Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: Providing and fixing sign frame 70mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system on one side and 3M double side tape from the other side. The panel should be made easily openable for maintenance. Sign Structure : All structural members in SS square post 100 x 100 x 3 mm, brush finished. base plate embedded below the floor finish and provided with a floor trim ring. All hardware used for fixing of sign shall be Stainless steel. Post including SS base Plate and Gussets in 6mm thick SS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete slab. The post shall closed with a 3 mm thick SS plate as specified and approved by the Engineer-In-charge. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, etc. required for fixing the sign in an internal location. | |||||
| 4.01 | Lighting:
All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site. | 3 | Job | 40,000 ₹1,20,000 | 27,000 ₹81,000 Lowest |
| 5.00 | Belt No. Sign
2.2h - Belt No. sign
Refer design drawing 2.2h-S, 2.2h-G
Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge
Sign Box:
Providing and fixing sign box with laser cut Bent Fabrication in 5mm thick 040 acrylic with pantone yellow C Vinyl pasted over acrylic. Block out vinyl for text Pantone Black 6C. Complete box excluding bottom side is lighted with internal LED lighting. Acrylic fabrication shall have transparent structural supports for obstruction free lighting. Box to be directly mounted on the sign structure.
Bottom panel:
Bottom MS Panel powder coated in colour to match Vinyl Black of Pantone Black 6C.
Sign Structure: Type 2
All structural members in SS square post 75 x 75 x 2.5 mm (assuming typical length of 2.7 meter), brush finished. base plate fixed to existing floor. All hardware used for fixing of sign shall be Stainless steel Post including SS base Plate and Gussets in 6mm thick SS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete slab. The post shall have closed with a 3 mm thick SS plate as specified and approved by the Engineer-In- charge. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, etc required for fixing the sign in an internal location.
Lighting:
All internal illumination shall be using LED strip Lights from of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots and adhering to the LUX levels mentioned in the performance specification. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site.
Accessories:
Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing. | 3 | Job | 28,000 ₹84,000 Lowest | 36,000 ₹1,08,000 |
| 6.00 | 2.4 - Utility Signs
2.4a - Washroom / Drinking Water / Baby care
Drg. No. -Refer design drawing 2.4a-S, 2.4a-G
Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge
Sign face
Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge.
Sign Frame:
Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system on one side and 3M double side tape from the other side. The panel should be made easily openable for maintenance.
Lighting:
All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site. | 10 | Job | 14,000 ₹1,40,000 | 9,900 ₹99,000 Lowest |
Tender Value
₹17.8 L
EMD Value
₹35,610
Closing Date
27 Aug 2024, 5:00 pmClosed
AGM (E-E)
O/o Airport Director, AGM (E-E), AAI, R. B. Airport, Bhopal
Re-Configuration of Existing Terminal Building at Raja Bhoj Airport, Bhopal. SH Provision of Internal and External Signages of NITB.
2024_AAI_203948_1
AAI/BPL/ENGG(E)/NIT-06/2024-25
Open Tender
Electrical Works
Works
150 days
AAI, R. B. Airport
Please refer Tender documents.
24 documents required · 24 mandatory
₹1,120
₹35,610
16 Sept 2025
6 Aug 2024
28 Aug 2024
6 Aug 2024
27 Aug 2024
6 Aug 2024
6 Aug 2024 - 16 Aug 2024
Amount
Entry/Exit Announcer Drg. No. - Refer design drawing 1.6bS, 1.6bG Providing and fixing Non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. All exterior signs should be manufactured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used. Sign Portal : Type B: 50mm deep portal has to be fabricated from 3 mm thick Yellow Aluminium Composit Panel with 0.25 mm PVDF, exterior grade with manufacturers warranty and test certficate from principle OEM from ALUDECOR / ALUCOBOND /EUROBOND or equivalent make, The internal structural frame to be made from 50 X 25 x 2 mm aluminium box section. Sign Letters : Providing and fixing Primary channel letters 50mm thk and Secondary profile cut letters 10mm thk, 3D cut letters in black glossy acrylic. All the letters would be made in profile to achieve true right angle. All mounting would be done in true plumb and using templet, keeping the alignment of the letters in one level
2.1 a - Ceiling Hung Directional Sign Refer design drawing 2.1aS, 2.1aG Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign face Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame : Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system on one side and 3M double side tape from the other side. The panel should be made easily openable for maintenance. Suspender : Providing and fixing Stainless steel 35 x 35mm Hollow sections (assuming typical length of 1 meter) mounted on slabs/beams/walls. Lighting : All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site
Message - 1
Message - 2
Message - 3
2.2a - Wall Mounted Facility Announcer Drg. No. - Refer design drawing 2.2a-S, 2.2a-G Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign face Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system on one side and 3M double side tape from the other side. The panel should be made easily openable for maintenance. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.
2.2d-1 Counter mounted facility Announcer Drg. No. Refer design drawing 2.2d-1G Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign face Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: Providing and fixing sign frame 70mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system on one side and 3M double side tape from the other side. The panel should be made easily openable for maintenance. Sign Structure : All structural members in SS square post 100 x 100 x 3 mm, brush finished. base plate embedded below the floor finish and provided with a floor trim ring. All hardware used for fixing of sign shall be Stainless steel. Post including SS base Plate and Gussets in 6mm thick SS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete slab. The post shall closed with a 3 mm thick SS plate as specified and approved by the Engineer-In-charge. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, etc. required for fixing the sign in an internal location.
Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site.
Belt No. Sign 2.2h - Belt No. sign Refer design drawing 2.2h-S, 2.2h-G Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign Box: Providing and fixing sign box with laser cut Bent Fabrication in 5mm thick 040 acrylic with pantone yellow C Vinyl pasted over acrylic. Block out vinyl for text Pantone Black 6C. Complete box excluding bottom side is lighted with internal LED lighting. Acrylic fabrication shall have transparent structural supports for obstruction free lighting. Box to be directly mounted on the sign structure. Bottom panel: Bottom MS Panel powder coated in colour to match Vinyl Black of Pantone Black 6C. Sign Structure: Type 2 All structural members in SS square post 75 x 75 x 2.5 mm (assuming typical length of 2.7 meter), brush finished. base plate fixed to existing floor. All hardware used for fixing of sign shall be Stainless steel Post including SS base Plate and Gussets in 6mm thick SS Plate as per drawing with holes to fix it on holding down bolts anchored in concrete slab. The post shall have closed with a 3 mm thick SS plate as specified and approved by the Engineer-In- charge. Cost to include all activities and temporary props used for a perfect vertical in plumb installation, etc required for fixing the sign in an internal location. Lighting: All internal illumination shall be using LED strip Lights from of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots and adhering to the LUX levels mentioned in the performance specification. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site. Accessories: Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.
2.4 - Utility Signs 2.4a - Washroom / Drinking Water / Baby care Drg. No. -Refer design drawing 2.4a-S, 2.4a-G Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign face Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system on one side and 3M double side tape from the other side. The panel should be made easily openable for maintenance. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site.
2.4c – Lift No Sign Drg. No. -Refer design drawing 2.4c-S, 2.4c-G Providing and fixing illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge Sign face Sign face shall be made in 5mm thick 040 white acrylic (as specified) having graphics pasted in Plotter cut Block out vinyl. The Plotter cut block out vinyl shall match the specified colour (colour Pantone Black 6C) and vinyl for text Pantone yellow C or Cyan 311C as per graphics and of specified make duly approved by the Engineer-in- Charge. Sign Frame: Type - 2 Providing and fixing sign frame 50mm wide Powder coated, colour RAL 9006 aluminium extrusion with inbuilt frame to receive the sign face. The sign face shall be fixed to sign frame with 3M brand dual lock system on one side and 3M double side tape from the other side. The panel should be made easily openable for maintenance. Lighting: All internal illumination shall be using LED strip edge Lights of approved make with electronic controllers, having even spread and overlaps to avoid banding and dark spots. Cost to include all internal connections and Wiring, terminating and connecting the incoming cable laid by the contractor at the site.
Emergency Signs - Photoluminescent Refer design drawing 2.6b-G Providing and fixing all Photoluminescent signs in the dedicated fire escape passages of the airports as per locations given in sign schedules, made of inkjet printing using artworks provided and with photoluminescent material as per technical specifications. Inkjetprinting shall be done on self-adhesive vinyl and pasted on 2mm thick powder coated white (RAL 9016) aluminium plate and fixed atlocation using screws. as per specification and using provided artwork including all operations from procuring the correct materials and made to sizes as specified and approved by the Engineer-in- charge. including all installation activities like marking, alignment and fixing with screws into the wall/cladding/face to the satisfaction of the Engineer-in- Charge
Emergency Signs Photoluminiscent - Fire Equipment Sign (2.6b-1)
At Lift (2.6b-4)
Emergency escape direction sign (Exit) (2.6b-5)
Directional Sign : Pedestrian Drg. No. - Refer design drawing 1.3b, 1.3b-G Providing and fixing Non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. All exterior signs should be manufactured considering harsh outdoor conditions, weather proofing techniques and materials shall be used. Sign face 3mm thick aluminium with a white retro-reflective film. Graphics in Plotter cut RAL:5013 Exterior grade opaque vinyl pasted over white retro-reflective vinyl pasted over 3mm thick aluminium sheet. Sign frame M.S. frame 50x50mm wide, hotdipped galvanized Sign structure M.S. hollow box section 75x75 and mounting square sections, hotdipped galvanised and PU Painted to match RAL 9006 grouted in ground. All hardware used for fixing of sign shall be Stainless steel. Secret fixing methods should be used to fix parts together. Cover plate 5 mm thick cover plate mounted on the flooring. The actual structural design of the sign for its stability shall be responsibility of the contractor and shall be designed with due consultation and approval from structural designer. Foundation Providing and laying of Reinforced Cement Concrete (RCC) (M20) foundation for the sign of size 650 X 650 X 1000 mm deep including its compaction and all activities like Excavation, PCC base layer wherever applicable and finished as per drawing. The items cost includes cutting and opening the floor finish at location. Accessories Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.
Bi-Pole Size : 2100x1020 mm
Bi-Pole Size - 2100x765 mm
Bi-Pole Size - 2100x510 mm
Traffic Statutory Sign Drg. No. - Refer design drawing 1.4a, 1.4a-G Providing and fixing Non-illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. All exterior signs should be manufactured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used. Sign face 3mm thick aluminium on two sides of the sign structure with a white retroreflective film and red Pantone 485C and black Pantone 6C vinyl. Sign structure - MS square post 50x50, hotdipped galvanised and powder coated to match RAL 9006 grouted in ground. All hardware used for fixing of sign shall be Stainless steel. Secret fixing methods should be used to fix parts together. The actual structural design of the sign for its stability shall be responsibility of the contractor and shall be designed with due consultation and approval from structural designer. Foundation Providing and laying of Reinforced Cement Concrete (RCC) (M20) foundation for the sign of size 650 X 650 X 1000 mm deep including its compaction and all activities like Excavation, PCC base layer wherever applicable and finished as per drawing. The items cost includes cutting and opening the floor finish at location. Accessories Providing and fixing all accessories such as thimbles, end connectors, nut-inserts, screws, rivets, bolts, washers, nuts, etc. complete as per drawing.
Unipole Size : 1200x510 mm
Unipole Size : 600x600 mm
Facility Announcer- Building Mounted Drg. No. - Refer design drawing 1.7c Providing and fixing Illuminated signs including all operations from fabrication to installation all complete as per drawings, technical specifications, signage schedule and to the satisfaction of the Engineer-in- Charge. All exterior signs should be manufactured considering harsh outdoor conditions, weatherproofing techniques and materials shall be used. Sign frame The sign frame box shall be made in 18 gauge thick PU Painted aluminium in specified blue colour RAL 5013. Router cut, grooved and folded to achieve the desired shape as per drawing fixed with the internal frame structure. Sign Face Sign face shall be provided with backlit LED lighting and shall have laser cutprofiles to recieve milky white 6mm thk acrylic sheet from back. All panels fixed using countersunk screws. Sign structure M .S. square sections 25x25mm hotdipped galvanised. The actual structural design of the sign for its stability shall be responsibility of the EPC contractor and shall be designed with due consultation and approval from structural designer. Lighting All internal illumination shall be using Power LED Lights with electronic controllers, having even spread and overlaps to avoidbanding and dark spots
Facility Announcer Size : 6000x1000 mm
Supply & Fixing of fascia sign board to be mounted on fascia of various Building. The sign board shall be made of 3mm thick aluminium composite panel sheet with white retro reflective vinyl Confirming to type IV of ASTM D-4956 with MS Frame as per the structural stability. Graphics should be plotter cutted exterior grade opaque Vinyl.
Size : 2100x600 mm
Vinayak Infra Signs and Projects Pvt Ltd
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .