Replacement of wornout / damaged components of 75 HP three phase high speed induction motor alongwith allied works at pumping station Kaghote stage-1st

Replacement of wornout / damaged components of 75HP three phase high speed induction motor with allied works at pumping station Kaghote stage-1st. The job involves disconnecting all electrical connections, decoupling the motor from the pump, removing from the base plate, opening of side covers of motor, extraction of the rotor from the stator and broken bearings. Shifting of rotor and stator separately to the roadside by manual carriage. Loading of the stator and rotor of the damaged motor on the vehicle for transport to Workshop. Reconditioning of rotor shaft by re-metaling and turning/finishing to the bearing size and making keyway. Extraction of damaged flashed solder from both ends of the rotor. Replacement of damaged bearings with new compatible/suitable ones, followed by cleaning the stator slots using organic solvent/ CCl4 to remove dirt/deposited carbon. Thereafter complete rewinding of motor with super enameled copper wire in loops as per original design, placing the wedges in slots and subsequently placing F-class, insulation paper. Finally, varnishing with Dr. becks’ Compound or equivalent compound and curing in oven along with required sleeve, greasing work and providing/fitting of self-weight bearing eye bolt for handling of motor. Assembling of motor and fitment over the base frame together with replacement of nut, bolts, washers making of electrical connections, replacing worn out nuts, bolts and thimbles for the electrical connection. Providing/fitting of self-weight bearing eye bolt for handling of motor. The motor should be tested through IR test and then testing of motor on load before testing on load at site after alignment, leveling and coupling with pump. Job includes cost of material, manual carriage charges, labour charges for skilled / semi -skilled labour, hire charges for tools & tackles etc. Complete Job.