PROVISION OF CERAMIC TILE FLOORING IN JCOs MD ACCN BLDG No P 11 AND OR MD ACCN BLDG No P 30 AT ARMY AREA COIMBATORE UNDER GE WELLINGTON

Amount

Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust, etc. all as specified and as directed.

Screed bed or bedding layer of cement mortar 15mm thick (1:6) for laying floor finishes all as specified and directed.

Non skid ceramic tiles 600 x 600 x 10mm thick area of each tile in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Taking down cement or cement lime plaster on brick / stone walls including raking out joints, hacking for key scrubbing down with water, etc., all as specified and directed.

Non skid ceramic tiles 300 x 600 x 10mm thick as in skiritings, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick/ stone wall or concrete surfaces as backing coat all as specified and directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm each and refixing in same opening, resecuring, easing and adjusting all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed.

Brick work with sub class B bricks straight or curved on plan exceeding 6M mean radius built in cement mortar 1:6 all as specified and directed.

Pre-cast cement concrete block masonry with solid blocks of cement concrete type C1 1;3:6 using 20 mm graded stone aggregate, exceeding 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

Rendering 15mm thick on fair face of brick wall / concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

Rendering 15mm thick on brick wall / concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of white wash all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site all as specified and directed.

Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21. with MS hinge pin 100 mm size all as specified and directed.

Aluminium anodised barrel tower bolt of extruded section 150mm length all as specified and directed.

Aluminium anodised alloy handles fabricated type 150mm size all as specified and directed.

20mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.

20mm bore unplasticised PVC pipes of pressure rating 10 Kgf/cm² laid and fixed complete to walls and ceilings or laid in floors all as specified and directed.

150mm (outer dia) PVC (SWR) pipes single socketed, in any length, laid in trenches, in floors or fixed to walls all as specified and directed.

Plain Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradles for 150mm all as specified and directed.

PVC (SWR) bends any radius, 150mm bore, fitted with oval access door all as specified and directed.

PVC (SWR) floor trap 75mm outer dia with grating including jointing with solvent cement all as specified and directed.

PVC (SWR) gully traps 125 x 110 mm, setting and jointing with solvent cement all as specified and directed.

Cutting openings, through brick walls for ventilator opening or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks hard-core, etc. to store and rubbish not exceeding 50M all as specified and directed.

Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

Figured glass, pin headed type, 3mm thick, and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Demolition of cement concrete in ground floors (including tiles / floor finishes) and pavings not exceeding 15cm thickness (below or above ground level) all as specified and directed.

25mm thick plain cement concrete type B0 1:2:4 using 12.5mm graded stone aggregate as in sub floor, sub bases, floors and pavings etc complete all as specified and directed.

Screed bed or bedding layer of cement mortar 10mm thick (1:4) for laying floor finishes all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangle) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Coloured glazed ceramic tiles 300 x 200 x 6-7mm thick as in skirting / dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile complete all as specified and directed.

Vitreous China, squatting pan, ”ORISSA PATTERN” size 580x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) P trap / S trap etc complete, fixed in repairs all as specified and directed.

PVC syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 litre capacity, fixed in repairs all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

Angle stop valve fancy type 15mm dia high pressure cast copper alloy chromium plated screwed down with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed in repairs complete all as specified and directed.

Bib tap 15mm dia, cast copper alloy, fancy type chromium plated, screwed down, screwed for iron pipe or ferrule complete all as specified and directed.

Tubular towel rail 20mm dia, brass chromium plated fancy type with brackets all as specified and directed.

Vitreous china wash basin, white, flat back, size 550 x 400mm including brackets complete all as specified and directed.

Pillar tap, fancy type, (Half turn type) 15mm dia cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick using soils all as specified and directed.

Removing excavated material to a distance not exceeding 250m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished all as specified and directed.

Use and waste of form work to edges of rough finished surfaces of concrete flats, treads, breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roof not exceeding 20cm wide and side of RCC / PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide all as specified and directed.

Steel reinforcement for concrete with Mild steel TMT deformed bars 8mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and as directed

Reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

Preparing newly plastered wall surfaces and applying two coats of colour wash over a coat of white wash complete all as specified and directed.

Rotational moulded polyethylene water storage tank 1000 Ltr capacity (cylindrical vertical with closed top) including brass float valve of 20mm bore dia hoisted and fixed in position all as specified and directed.

20mm bore dia Gunmetal, globe or gate valve (hulf turn type or wheel type), screwed both ends for iron pipe all as specified and as directed.

Steel reinforcement for concrete with Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Mild steel framed work such as grills, for portions framed and hung as gates including pintle hinges, stops, hand-made sliding bolts, etc for ornamental and intricate design all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in ridges fixed with self tapping screws all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in soft / loose soil including clearing away shrubs, roots and trees not exceeding 30cm grith (measured 1cm above ground level) all as specified and directed.

75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

Sand filling of 50mm thick under floors including watering and consolidation all as specified and directed.

Machine Pressed precast concrete interlocking paver block rubberised any shape and size conforming to IS- 15658 - 2006 of 60 mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.

Providing precast cement concrete type B1 1:2:4 using 20mm graded stone aggregate in cemnt mortar 1:4 as in kerbs other than roof kerbs all as specified and directed.

Reinforced Concrete pipes class NP-2 laid in trenches and jointed complete with collars of 300mm dia all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6, type C2, using 40mm graded crushed stone aggregate for 300mm bore pipe all as specified and as directed

Point wiring using with multistranded copper conductor cable 1.5 sqmm nominal cross sectional area single core PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked with valid CML No. in and including concealed pipe and accessories on wall / roof / floor etc. ISI marked with mild steel / pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint / aluminium paint over a coat of red oxide primer externally covered with 3mm thick plastic lamination sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq.mm nomial cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed for one light / exhaust fan controlled by one switch 5 Amps one way all as specified and directed.

All as per item No 67 hereinbefore but One 3 pin 5 amps switch socket combination on the same board all as specified and directed.

Switch Piano flush type single pole one way 5 Amp 240V, 50Hz AC, ISI marked all as specified and directed

Switch socket combination 2 in 1, 5 Amp flush type ISI marked all as specified and directed

Ceiling rose, bakelite, 65 X 15 mm three terminals ISI marked all as specified and directed

Exhaust fan 300mm sweep single phase AC 230 volts with louvers on the outside, wall mounting brackets nuts bolts, rubber set bush / pad complete inclluding fixing arrangement i.e clamp, nuts, bolts etc all as specified and directed

Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, suitable of lamp 10W LED 6000K (2 ft). Make: Havells cat part No. LHEWEBP7IN1W010 or equivalent in Philips/ CG

MCB DB double door type, single pole of 4 way 230 Volt ISI marked all as specified and directed

MCB SPN 32 Amps, 240 volts all as specified and directed

MCB single pole 6-32 Amps, 240 volts all as specified and directed

UNIQUE INDIA CONSTRUCTIONS

SEMBA ELECTRICALS

M/s Shana Constructions

CAK Enterprises

p.chinnasamy

SENTOOR BUILDERSS