Loading…
Loading…
Tender Value
₹2.2 Cr
EMD Value
₹2.6 L
Closing Date
27 Mar 2026, 3:15 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DEN N
20 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
In case of newly formed partnership firm, the credentials of individual partners from previous propriety firm(s) or dissolved previous partnership firm(s) or split previous partnership firm(s), shall be considered only to the extent of their share in previous entity on the date of dissolution / split and their share in newly formed partnership firm. For example, a partner A had 30% share in previous entity and his share in present partnership firm is 20%. In the present tender under consideration, the credentials of partner A will be considered to the extent of 0.3*0.2*value of the work done in the previous entity. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc.
In case of existing partnership firm, if any one or more partners quit the partnership firm, the credentials of remaining partnership firm shall be re-worked out i.e., the quitting partner(s) shall take away his credentials to the extent of his share on the date of quitting the partnership firm(e.g. in a partnership firm of partners A, B & C having share 30%, 30% & 40% 1.2.1 respectively and credentials of Rs 10 crore; in case partner C quits the firm, the credentials of this partnership firm shall remain as Rs 6 crore). For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc.
In case of existing partnership firm if any new partner(s) joins the firm without any modification in the name and PAN/TAN no. of the firm, the credentials of partnership firm shall get enhanced to the extent of credentials of newly added partner(s) on the same principles as 1.2.2 mentioned in item 6 above. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deeds, dissolution/splitting deeds and proof of surrender of PAN No.(s) in case of dissolution of partnership firm etc.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender (b) (1)In case of tenders for composite works(e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. ( Click here to download Format)
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Para 1.2 & its sub para of standard financial criteria are also applicable during evaluation of technical credential of partnership firm.
Defination of Similar Work :- 'Any type of civil work viz building up to G+4 and structure work, pipe line, under ground and overhead tanks, foundation treatment works in any Railway embankment /cutting, any earth work, cover over platform, bore wells, level crossing works including lifting barriers, cement concrete apron works'.
32 conditions · 7 needing a document upload
Tenderers should show discount in the rate schedule only, instead of anywhere else in the offer. Discounts not shown at designated place will be summarily ignored for assigning interse ranking of offers. Conditional discount will not be considered for adjudging the inter-se position i.e. rate quoted without any conditions attached (viz. Discount/ Rebates having linkages to quantity, rates payment etc.) will only be considered for evaluation purpose. In other words, discounted rates linked to quantities, rates, prompt payment etc. will be ignored for determining inter-se position. Railway, however reserves the right to use the discounted rate/ rates considered workable and appropriate, for counter offer to the successful tenderers
Tenderers will examine the various provisions of The Central Goods and Services Tax Act,2017(CGST)/ Integrated Goods and Services Tax Act, 2017 (IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt.& as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority. In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority. Contractor shall be liable to pay/refund the amount collected as GST to the Indian Railways along with interest and penalties, if any imposed by the authorities, in case GST input tax credit of Indian Railways is denied/rejected by the tax authorities due to reasons mentioned below but not limited to: Wrong/incorrect invoices issued by Contractor ; No-filing of GST returns; Non payment of GST collected from Indian Railways to the authorities; Any other noncompliance done by Contractor; Retention Money: Any payment liable to be paid by Indian Railways to contractor against the goods or services or both supplied by such contractor to Indian Railways shall be kept on hold in case supplier makes any noncompliance of any of the GST law provisions including nonreporting of invoices in GST returns. Such payment shall be released after proper verification of records and availability of ITC to Indian Railways as per provisions of GST Law. General Indemnity: Contractor hereby agrees to indemnify and hold harmless the Indian Railways from and against any and all losses, including loss on account of Input Tax Credit and all losses incurred by the Indian Railways relating to or arising out of or in connection with any actual or threatened claim, legal action, proceedings, prosecution or inquiry by or against the Indian Railways arising out, directly or indirectly, offailure by the contractor to comply with the provisions of GST and related laws, or based upon or arising from any failure by the Contractor {After award of LOA it should be indemnify otherwise action may be taken by competent authority and will be binding upon contractor).(ACS-6 dtd 21.12.2023). ( Click here to download Format) ( Click here to download Format)
The Bid Security shall be deposited either in cash through epayment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per AnnexureVIA and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i).A scanned copy of the Bank Guarantee shall be uploaded on e- Procurement Portal (IREPS) while applying to the tender. (ii).The original Bank Guarantee should be delivered to Chief Office Superintendent Rate before closing date for submission of bids i.e., excluding the last date of submission of bids. (ACS-5 dtd 20.10.02023). (iii)Non submission of scanned copy of Bank Guarantee with the bid on etendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv) The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v) The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected (vi).The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii)The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii).If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In terms of HQ's letter No. W.187.R.GCC dated 24.05.2019, "If any contract is terminated under clause 62 of GCC on contractor's fault, then that contractor shall be temporarily debarred from participation in any tender in that division for ONE YEAR, If so decided by the Tender Accepting Authority. In case creation of unsafe working due to infringement/ entanglement of P.Way materials ( Rails, Sleeper, tec.) or/and tool & plants, deployed at worksites with running trains, a penalty of Rs. 1,00,000/- (Rs. One Lakh) shall be imposed per incident. In case of repeated such incidence, contract is liable for termination as per contract conditions. (HQ's Lt. No. W.636.T.FBWP/Tender/2017 dtd. 12.10.2021). Further, Excavation and Earthwork in Railway Premises: While carrying out the excavation in the yard for executing any work all precautions should be taken to avoid damages to cables pipe lines etc and the damage cost will be borne by agency. In order to avoid damage to the Signaling, Tele communication and Electrical cables, Telecom Circular No.17/2013 -"Procedure for undertaking digging work in the vicinity of signaling, electrical and telecommunication cables" issued vide letter no. 2003/Tele/RCIL/1 Pt.IX dated 24.06.2013 has to be followed.
As per the recommendations by the 47th GST Council Meeting in relation to changes in Tax rates, circulated by Railway Board vide L.No.2017/ACII/1/6/GST/Main/Vol.-III, dated 05-07-2022, the GST rates on Railway works contract has been revised from existing 12% to 18%. The clarification mentioned in the Railway Board's letter is attached in tender document. Therefore, Bidders are requested to quote their rates including 18% GST.'
Spl Eligibility Condition, Scope of Work, Special conditions attached to GCC
In terms of HQ's letter No. W.187.R.GCC dated 24.05.2019, "If any contract is terminated under clause 62 of GCC on contractor's fault, then that contractor shall be temporarily debarred from participation in any tender in that division for ONE YEAR, If so decided by the Tender Accepting Authority
In case creation of unsafe working due to infringement/ entanglement of P. Way materials ( Rails, Sleeper, tec.) or/and tool & plants, deployed at worksites with running trains, a penalty of Rs. 1,00,000/- (Rs. One Lakh) shall be imposed per incident. In case of repeated such incidence, contract is liable for termination as per contract conditions. (HQ's Lt. No. W.636.T.FBWP/Tender/2017 dtd. 12.10.2021)
Tenderers are requested to go through the Special Conditions for Letter of Credit.
The tender Document of the subjected work is in conformity with Indian Railways Standard General Conditions of Contract - April 2022 with latest correction slip No 1 of dated 14.07.2022, the perspective Tenderers are requested to go through the Tender Document before offering their offers
Annexure-V(A) shall be submitted by the each member of a partnership Firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc, as the case may be. Non submission of the certificate/Affidavit, or submission of certificate/Affidavit either not properly filled in, or in a format other than the prescribed format shall lead to summarily rejection of your offer
Applicability of Price Variation Clause (PVC) depends on fulfillment of condition of Para 46.A1 of Indian Railways Standard General Conditions of Contract April 2022-part II corrected upto ACS 1.
Documentary proof - Tenderer should submit scanned copy documentary proof in regard for fulfilling the Technical /financial eligibility criteria along-with their offer (for details refer attached documents). If the tenderers do not submit any proof of meeting with the eligibility criteria as laid down in the tender conditions, the offer shall be considered as incomplete and shall be summarily rejected. Documents submitted in support of eligibility criteria after opening of tender will not be considered.
Tenderer should quote their offer with all inclusive rates
The all documents submitted should not be corrupted, if at the time of tender opening. The document submitted are not opened being corrupted, offer shall be summarily rejected.
Completion period of this tender work is 06 months
Repairs to existing Toilet blocks on PF no.01 to 06 at Pune Station under ADEN/W/PA
DRM-W-PA-E-Tend-2025-N-28
DRM-W-PA-E-Tend-2025-N-28
Open
Works - General
6 Months
Pune, Maharashtra
₹0
₹2.6 L
27 Mar 2026
6 Mar 2026
13 Mar 2026
86 items across 1 schedule · ₹2,89,60,380.25 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 2300 | 494.1 | 11,36,430 |
| 2 | All kinds of soil. | cum | 230 | 260.3 | 59,869 |
| 3 | Ordinary rock | cum | 175 | 632.95 | 1,10,766.25 |
| 4 | Hard rock (blasting prohibited) | cum | 60 | 1,523.05 | 91,383 |
| 5 | Pipes, cables etc, not exceeding 80 mm dia. | Metre | 290 | 215.6 | 62,524 |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 230 | 7,878.5 | 18,12,055 |
| 7 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. | Sqm | 115 | 842.5 | 96,887.5 |
| 8 | Columns, piers, abutments, pillars, posts and struts | Sqm | 115 | 961.3 | 1,10,549.5 |
| 9 | Concrete of M20 grade with minimum cement content of 270 kg /cum | cum | 115 | 9,212.6 | 10,59,449 |
| 10 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 21500 | 107.85 | 23,18,775 |
| 11 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 115 | 9,504.75 | 10,93,046.25 |
| 12 | Cement Mortar 1:6 (1 cement : 6 coarse sand). | cum | 230 | 6,295.15 | 14,47,884.5 |
| 13 | Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove edges and jointed with bonding plaster as per manufacturer's specifications in superstructure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 | Sqm | 150 | 1,023.6 | 1,53,540 |
| 14 | Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry with 150 mm to 300 mm thick with Grade -1 AAC blocks of density 551 to 650 kg/cum conforming to IS: 2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately). | cum | 230 | 8,333.65 | 19,16,739.5 |
| 15 | Area of slab over 0.50 sqm | Sqm | 230 | 5,136.3 | 11,81,349 |
| 16 | Area of slab upto 0.50 sqm | Sqm | 290 | 4,170.7 | 12,09,503 |
| 17 | Granite work | Metre | 460 | 510.95 | 2,35,037 |
| 18 | Metre | 575 | 568.55 | 3,26,916.25 | |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 750 | 1,267.95 | 9,50,962.5 |
| 20 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 115 | 3,167.95 | 3,64,314.25 |
| 21 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 115 | 462.35 | 53,170.25 |
| 22 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | Sqm | 175 | 4,488.95 | 7,85,566.25 |
| 23 | Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) | Sqm | 115 | 2,829.25 | 3,25,363.75 |
| 24 | 200 mm | Each | 60 | 186.65 | 11,199 |
| 25 | Providing and fixing 2 mm thick 16 to 19 mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. | Metre | 150 | 43.8 | 6,570 |
| 26 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 805 | 772.4 | 6,21,782 |
| 27 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In- charge. | Kg | 460 | 130.5 | 60,030 |
| 28 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 290 | 614.2 | 1,78,118 |
| 29 | Light shade pigment using white cement | Sqm | 290 | 1,402 | 4,06,580 |
| 30 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 520 | 1,439.4 | 7,48,488 |
| 31 | Size of Tile 600x600 mm | Sqm | 345 | 1,553.45 | 5,35,940.25 |
| 32 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 290 | 3,186.7 | 9,24,143 |
| 33 | 75 mm diameter | Metre | 345 | 248.8 | 85,836 |
| 34 | 110x110x110 mm | Each | 175 | 234.15 | 40,976.25 |
| 35 | 110 mm bend | Each | 175 | 150.35 | 26,311.25 |
| 36 | 1:4 (1 cement: 4 fine sand) | Sqm | 520 | 347.05 | 1,80,466 |
| 37 | 1:4 (1 cement: 4 fine sand) | Sqm | 575 | 471.35 | 2,71,026.25 |
| 38 | 1:4 (1 cement: 4 coarse sand) | Sqm | 405 | 357.35 | 1,44,726.75 |
| 39 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 2300 | 185.65 | 4,26,995 |
| 40 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 2300 | 25.15 | 57,845 |
| 41 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | Sqm | 2875 | 112.9 | 3,24,587.5 |
| 42 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 115 | 2,434.25 | 2,79,938.75 |
| 43 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 60 | 3,551.25 | 2,13,075 |
| 44 | In cement mortar | cum | 145 | 2,060.2 | 2,98,729 |
| 45 | Of area 3 sq. metres and below | Each | 35 | 367.2 | 12,852 |
| 46 | For thickness of tiles 10 mm to 25 mm | Sqm | 290 | 73.4 | 21,286 |
| 47 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 175 | 266.45 | 46,628.75 |
| 48 | G.S. Sheet | Sqm | 405 | 164.95 | 66,804.75 |
| 49 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 575 | 54.65 | 31,423.75 |
| 50 | 90 mm to 45 mm size stone aggregate | cum | 85 | 2,098.4 | 1,78,364 |
| 51 | 63 mm to 45 mm size stone aggregate | cum | 85 | 1,636.05 | 1,39,064.25 |
| 52 | New work (Two or more coats) | Sqm | 1150 | 188.2 | 2,16,430 |
| 53 | Old work (One or more coats) | Sqm | 1550 | 120.8 | 1,87,240 |
| 54 | Overhead informatory road signage | Sqm | 70 | 5,879.9 | 4,11,593 |
| 55 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 25 | 8,006.6 | 2,00,165 |
| 56 | Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | Each | 45 | 12,071.75 | 5,43,228.75 |
| 57 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 40 | 2,648.85 | 1,05,954 |
| 58 | 32 mm dia | Each | 60 | 119.55 | 7,173 |
| 59 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 35 | 53.25 | 1,863.75 |
| 60 | Rectangular shape 1500x450 mm | Each | 10 | 2,093 | 20,930 |
| 61 | C.P. brass | Each | 15 | 803.7 | 12,055.5 |
| 62 | Sand cast iron S&S as per IS: 3989 | Each | 35 | 1,996.5 | 69,877.5 |
| 63 | Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms | Each | 40 | 122.4 | 4,896 |
| 64 | Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms | Each | 40 | 375.65 | 15,026 |
| 65 | 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms | Each | 60 | 175.4 | 10,524 |
| 66 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. | Each | 25 | 14,999.15 | 3,74,978.75 |
| 67 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. | Each | 45 | 18,088.45 | 8,13,980.25 |
| 68 | 15 mm nominal dia Pipes | Metre | 220 | 497.8 | 1,09,516 |
| 69 | 20 mm nominal dia Pipes | Metre | 220 | 537.6 | 1,18,272 |
| 70 | 32 mm nominal dia Pipes | Metre | 280 | 739.3 | 2,07,004 |
| 71 | 50 mm nominal dia Pipes | Metre | 500 | 794.25 | 3,97,125 |
| 72 | 15 mm nominal bore | Each | 175 | 353.25 | 61,818.75 |
| 73 | 15 mm nominal bore | Each | 70 | 353.25 | 24,727.5 |
| 74 | 50 mm nominal bore | Each | 40 | 1,026.65 | 41,066 |
| 75 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 28000 | 11 | 3,08,000 |
| 76 | 150 mm diameter | Metre | 125 | 98.45 | 12,306.25 |
| 77 | 150 mm dia. R.C.C. pipe | Metre | 170 | 556.45 | 94,596.5 |
| 78 | 250 mm dia. R.C.C. pipe | Metre | 350 | 899.8 | 3,14,930 |
| 79 | 300 mm dia. R.C.C. pipe | Metre | 520 | 994.3 | 5,17,036 |
| 80 | Rectangular shape 600x450 mm internal dimensions | Each | 10 | 1,437.65 | 14,376.5 |
| 81 | Rectangular manhole 90x80 cm and 45 cm deep | Each | 15 | 2,540.85 | 38,112.75 |
| 82 | Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5 | Each | 30 | 2,625.5 | 78,765 |
| 83 | Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20 | Each | 30 | 3,881.5 | 1,16,445 |
| 84 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 175 | 530.9 | 92,907.5 |
| 85 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 170 | 634.45 | 1,07,856.5 |
| 86 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 45 | 1,505.25 | 67,736.25 |
| Schedule total | ₹2,89,60,380.25 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC with special conditions
ATTACHMENT
ScopeofN-28.pdf
ATTACHMENT
AnneVANEW.pdf
ATTACHMENT
Annexure_VIBNew.pdf
ATTACHMENT
INDEMNITYBOND.pdf
ATTACHMENT
Tenderform1stsheetnew.pdf
ATTACHMENT
ASC1-10.pdf
ATTACHMENT
CHECKLIST.pdf
ATTACHMENT
ListofplantMachinary.pdf
ATTACHMENT
11zon_GCC-ReptoToiletBlocks.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .