Supply and fixing of hymast 16 meter near by ambeshwar mandir in ward 43

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & outside dip, heaving pole sheet thickness 3 mm. Top dia minimum 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufacture drawing/site reuiment along with foundation bolts, nuts, washers, anchor plates etc. dcomplete in all respect as per direction if E/I S.I. No. 652.

Supply and laying of aluminium insulated armoured served sheathed cables 1100 volts conductor PVC grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Complete in all respect as per direction of E/I S.I. No. 501(H) 10 Sq mm 4 core

Supply and fixing of factory wired integral LED flood light luminaries with die cast aluminium housing built with driver set suitable for 200 watt. Confirming to IP 66 protection complete in all respect as per direction of E/I for high mast light (20 meter) S.I. No. 1455 CAT-AAA.

Supply and burrying of 600×600×6 mm GI Plate Vertically for Earthing complete as per S.I. 7036 complete in all respect S.I. No. 703.

S/F and following Capacity of automatic Street Light cubicle control pannel painted with anticorrosive alkali and acid Proof paint consisting of time switch TSO 100 series with contractors, HRC Fuse, isolating switch metering instrument & instrument box with CTs etc in case of TPN, Complete in all respect 40 A SPN PWD SOR 2017-18 No. 807 (c) II