Repairs of PU.Ele School Toilet 1 at Mathalamadaiyan in Pachaiperumanallur Panchyat kollidam Block SISU 2025-26

Amount

1Repairs of PU.Ele School Toilet 1 at Mathalamadaiyan in Pachaiperumanallur Panchyat kollidam Block

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at th

white washing the old ceiling ect complete complying with standard specification and as directed by the Departmental Officer

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Drilling of 140/ 150mm dia pilot borewell using calyx rigs

Reaming from 150mm dia pilot borewell to 300mm dia

Labour charges for inserting 150mm PVC casing pipe assembly

Supply and delivery of 160mm PVC end cap

Supply and delivery of 50mm PVC pipe 6Ksc P.n-22

Supply and delivery of 50mm PVC Elbow

Supply and delivery of 50mm GI Pipe

Supply and delivery of 50 mm dia GM Gate valve

Solvent Cement

Supplying 1 HP submersible pump with ISI make including cost and conveyance of all materilas and labour charges etc complete as per standerd specification 250x35 Page No:-95 Sino:-16

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade in 25mm dia Gt pipe (Glass 'B') bent at both ends with necessary angle iron up right and end supports for mains (S.D. No.64) Service pipe

Supply and run of 2 of 6 sq. mm (84/0.3) PVC insulated SC unshenthed Cu.Couductor of 1100 V grade on 7/20 GI bearer wire for service connection main (From electric Post to service pipe) (SD No.64)

PVC Tank

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}