Replacing the old damaged AC sheet roofing FF into galvalume sheet of the west wing and Re flooring with tiles at Ground Floor of GLPS, Mahe

Amount

Code No. 15.28.2:-Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of -Asbestos sheet

Code No. 15.18:-Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets ,welding etc.including dismembering and stacking within 50 metres lead

Code No. 15.41:- Dismantling cement asbestos or other hard board ceiling or partion walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead

Code No. 10.16.1:- Steel work in built up tubular (round,square or rectanglar hollow tubes etc.) trusses etc., including cutting , hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - hot finished welded type tubes

Code No. 13.52.1:- Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface , etc.complete - on steel work

Code No. 12.80:- Providing and fixing colour coated galvalume sheet of 550 M.P.A. yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31 mm pitch of 250 mm and overall width of 1060 mm and thickness 0.5mm with required J or C hook bolts and nuts 8mm dia G.S.paint and working etc., complete excluding the cost of purlin , rafter and truss etc.,

Code No. 12.51.1:- Providing and fixing precoated galvanised steel sheet roofing accessories 0.5mm (+0.05%) total coated thickness , zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns using self drilling / self tapping screws complete -Ridges plain (500 - 600mm)

Code No. 12.26.1:-Providing and fixing plain multipurpose cement board (High pressure steam cured) as per IS: 14862 , with suitable screws for fibre cement board in ceiling etc .complete (frame work to be paid separately) - 6mm thick cement board

Code No. 13.431:- Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer

Code No.11.40.2:- Providing and laying rectified ceramic rustic / matt finish floor tiles of size 600x600 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make (Somany / Nitco) in all colours shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete

Code No. 15.56:- Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Code No. 14.53.1B:- Wall painting with plastic emulsion paint - Premium of approved brand and manufacture to give an even shade - One or more coats on old work

Code No. 13.60.1B:-Wall painting with plastic emulsion paint -Premium of approved brand and manufacture to give an even shade - two or more coats on new work

Krishna kumar

V SUNIL KUMAR