ADDITION ALTERATION OF 04 X TOILET BLOCK OF BLDG NO NP-19 AT 57 WEU AND PROVN OF 01 X BATHROOM TOILET AT HQ DDG SI (NZ) UNDER GE (NORTH) UDHAMPUR

Taking down cement plaster of any description on bricks, PCC block or stone wals, etc. including raking out joints, backing for key, scrubbing down with water etc complete all as specified and as directed.

10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

10mm thick rendering on ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as specified and as directed.

15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth mixed with water proofing compound complete all as specified and as directed.

Rendering 5mm thick in CM 1:3 on ceiling finished even & smooth without using extra cement complete all as specified and as directed.

Preparation new surfaces of walls surfaces and applying two coat of cement base paint over one coat of wall care putty over one coat of cement primer complete all as specified and as directed.

All as per srl item No 7.00 here in before but on ceiling surfaces.

Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of wall care putty complete all as specified and as directed.

Dismantling floor, hearth or wall tling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Colour glazed ceremic coloured tiles in vertical surface 300 x 600 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement complete all as specified and as directed.

Non skid coloured glazed ceramic tiles area of each tile exc. 0.11 sqm but n.exc 0.18 Sqm, 7mm to 8mm thick as in floor finishes set and jointed in neat cement slurry nd pointed in white or coloured cement to match over and including 15mm thick sreed bed of cement mortar (1:4) complete all as specified and as directed.

Green marble 18-20 mm thick machine cut as in shelves, cupboard, etc bedded, jointed and pointed with grey cement slurry incluing cutting and polishing over and including 20 mm thick bedding layer of CM 1:4 complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick cement screed in CM 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.

25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified and as directed.

Taking down chowkat or frames with shutters (without taking off shutters form the frames ) n.exc 1.5 Sqm each complete all as specified and as directed.

All as per item 16.00 here in before but exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified and as directed.

Reinforced cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in shelves, slabs and in similar works complete all as specified and directed by Engr-in-charge.

Reinforced cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in Lintels/ beam complete all as specified and directed by Engr-in-charge.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and mimilar work, not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beam, beam hunching girders, bressum-mers, lintels cantilevers, shelves including supports, overhangs etc also splays between floors and beams, etc complete all as specified and directed.

Use and waste of formwork to roofs, chajjas, trough and smiliar items including edges with rough finished flat surfaces of concrete complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild steel TMT bars 6 to 8 mm dia in stirrups cut to length bent to shape required including cranking bending spirally for hopping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia confirmation to TMT bars complete all as specified and as directed.

Mild steel TMT bars 8 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia all as specified and directed.

M&L for half brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius butt in cm 1:4 complete all as specified and directed by Engr-in-charge.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and as directed.

Brick work with subclass "B" bricks, straight or curved on plan exc 6m mean radius built in 1:4 complete all as specified and as directed.

Brick work with subclass "B" bricks, straight or curved on plan exc 6m mean radius built in 1:6 complete all as specified and as directed.

Plain cement concrete M-10 (Nominal Mix) as in surface channel and drains complete all as specified complete all as specified and directed.

Plain cement concrete M-15 (Nominal Mix) in benching, coping and the like including weathering slightly rounded or chamfered angles as directed including form work and finishing all exposed surfaces complete all as specified and directed.

Mild steel framed work such as grills, gratings etc, with ends of bars shouldered and or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framedwork of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing.

Solid PVC door frame of size 50mm x 47mm made out of 500 plain colour PVC sheet reinforced with M.S Square tube, in opening complete all as specified and directed by Engr-in-charge.

Preparation new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over pre primered surface complete all as specified and as directed.

100mm long butt hings medium weight cold rolled mild steel with Brass screws complete all as specified and as directed.

Aluminium anodised bolts barrels tower bolts with bright bolt 100mm long complete all as specified and as directed.

Anodised aluminium handle 150mm size complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

75mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified and as directed.

Preparation old decorated surfaces of walls surfaces and applying two coat of cement base paint over one coat of wall care putty over one coat of cement primer all as specified.

Description all as per srl item No 42.00 here in before but on ceiling surfaces.

Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of birla wall care putty complete all as specified and as directed.

Dismantling of cast iron or reindorced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required.

Cast iron soil, waste and vent pipes, 100mm dia in any length with or without ears with cement joints, laid in trenches or in floors/walls.

Cast iron soil, waste and vent pipes, 75mm dia in any length with or without ears with cement joints, laid in trenches or in floors/walls.

S&F cast CI oval access door fixed to 100mm bore pipe.

S&F cast CI oval access door fixed to 75mm bore pipe.

S&F cast iron floor trap with grating to 75mm bore including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and as directed.

S&F CI branch pieces single (equal or unequal) ordinary or inverted (Spigot or socket type) or with parallel branches for bore of pipe 100mm complete all as specified and as directed.

All as per serial item no 51.00 here in before but for bore pipe 75mm.

Stack clamp out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and screwing ends of stay to wall or roof of 110mm bore pipe complete all as specified and as directed.

Bends (any radius) 110mm bore diminishing piece as or tapers all as specified.

All as per item No 54.00 here in before but 75mm bore pipe.

Mild steel framed work as in doors, Gates, cupboards etc, complete, drilled for fixing of sttel sheeting or other covering of steel sheeting as in cupboards. Etc to be prepared for hanging or sliding with and including either hooks or hingersor steel hanging door/ cupboard fittings inclusive of steel sheeting as in frames and shutters complete all as specified and as directed.

Cuttings chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good cutting not exc 10cm grith

Ball brass valves 20mm, high pressure , with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and as directed.

15mm angle valves (chromium plated) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unious and fixed in repair.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm complete all as specified and as directed.

GI water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore complete all as specified and as directed.

GI water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore complete all as specified and as directed.

Demolition of cement concrete(unrinforced), in any position and paving n.exc. 15 cm thickness( below or above ground level) including tile/ terrazzo floor complete all as specified and directed.

Rendering 15mm thick on fair face of brick work or concrete surfaces with CM 1:4 with water proffing compund even & smooth w/o using extra cement complete all as specified and as directed.

Priming the roof surface with bitumenous primer @ 0.3 liters/ Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, or weight not less than 3Kg per Sqm with centre layer core of 90 micron high molecular density ployethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm complete all as specified and as directed.

M&L for apply two coats of aluminium paint on roof complete all as specified and as directed.

PVC (SWR) pipe 110mm dia in any length with rubber ring joints, fixed to walls or in any height or laid in trenches or in floors complete all as specified and directed.

PVC (SWR). Pipe 75mm dia in any length with rubber ring joints, fixed to walls or in any height or laid in trenches or in floors complete all as specified and as directed.

PVC (SWR) bends of 110mm dia complete all as specified and as directed.

PVC (SWR) bends of 75mm dia complete all as specified and as directed.

Granite (of any type) 18mm to 20mm thick work (table rubbed & polished) as in steps, jambs, pillars, window cills, cooking platforms and like, machine cut, bedded and jointed with grey cement slurry and pointed with white cemetn with admixture of pigment ot match the shade of granite stone laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-charge.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' 15mm with long screwed shanks any fly-nuts, screwed for iron pipe and fixed.

PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in floors or pavings 75mm thick complete all as specified and directed.

Machine pressed precast interlocking paver blocks any shape and size grey Cement and Pigment confirming to IS 15658-2006 of 60mm thickness (M-35 Grade) complete all as specified and directed by Engr-in-charge.

Sand cushoning bed (filling under floors) including spreading levelling watering if required complete all as specified & directed.

Rotational moulded PVC water tanks of Cap 1000 Ltrs cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part incl fixing of 20mm PTMT float valve medium grade dismanteling of existing unserviceable water tanks and removal from site.

Rotational moulded PVC water tanks of Cap 500 Ltrs cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part incl fixing of 20mm PTMT float valve medium grade complete all as specified and as directed.

Aluminium powder coated(colour) frame for door , window,ventilator,glazed with aluminium shutter(medium weght) of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, etc complete all as specified and as directed.

Aluminium powder coated(colour) section as in window,ventilator,glazed with aluminium shutter weighting 0.55 kg/m including necessary fitting of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, including aluminium grill of 5 to 6 dia, size of mesh not exc 7.5cm in either direction, as approved by GE, complete all as specified etc complete all as specified and as directed.

Alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm complete all as specified and as directed.

100mm stainless steel butt hinges complete all as specified and as directed.

150mm length extruded aluminium alloy handles,fabricated type, anodised complete all as specified and as directed.

150mm length aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane of 4 mm thick etc complete all as specified and as directed.

6mm thick bakelite sheet prelaminated both side with decorative choice lamination with aluminium frame work complete all as specified and directed.

75mm thick cement concrete 1:3:6 type C-2 ( using 40mm graded stone aggegate) as in plinth protection finished even and smooth without using extra cement ( laid in alternate bags).

Salt-glazed stoneware gully traps,150x150 square or round mouthed, type "P" complete all as specified and as directed.

Concrete bed to drain pipes of 150mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified

100 mm dia Reinforced concrete pipes, class NP-2 laid in trenches and jointed complete with collars as specified

Returning, filling including spreading, levelling and well ramming in layers not exceeding 25 cm in each layer as in hard / dense soil complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 sectiion) in cement concrete 1:2:4 (type B1) smooth finished, and reforming benching as required of pipe 150mm dia complete.

Removing excavated soils n.exc 50mtrs and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

Stop valves cast copper(CP) alloy, screwed down high pressure with crutch or butterfly handle scrwed both ends for iron pipes or for unions and fixed bore pipe 20mm complete all as specified and as directed.

All as per serial item no 94.00 here in before but bore of pipe 15mm.

Fancy type chromium plated angle valve with flange 15mm size complete all as specified and as directed.

Bib tap long nose with flange cast copper alloy chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed (15mm size) complete all as specified and as directed.

Vitreous china wash down water closet pan pedestal patern white /coloured including CP EWC Jet with seat cover Complete and taking down old seat fixing bolt flush pipe complete all as specified and as directed.

S&F in repair vitreous china water closet (squatt pan) orissa pattern 580x 440 mm size pan white with front or back inlet with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe complete all as specified and as directed.

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

6mm thick looking mirror fixed on 12mm thick marine plywood with powercoated aluminium frame alround the mirror including mounted on wall size 1.50x.60 complete all as specified and directed.

Urinal valve auto closing system with built in control cock & wall flange valve 15 mm bore including urinal sperader of CP complete all as specified and as directed.

Vitreous china urinal half stall type colours excluding flushing cistern flush pipe and waste pipe complete all as specified and as directed.

Fancy type viteous china counter top, wash hand basin, "OVAL" shaped,white of size 550x400mm including bottle traps and piller cock with green marble inserted in 18 mm thick mounted green marble stone slab platform by cutting on oval shaped etccompleted all as specified and directed .(Green marble cutting shall be measured and paid separately)

Extra over for cutting and moulding of green marble in oval shaped to accommodate WHB of size 550x400mm complete all as specified and as directed.

CP Towel Ring 200mm dia fixed in repair complete all as specified and as directed.

Corner Glass self ( With CP brakets) 225 x 225 mm complete all as specified and as directed.

Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and as directed.

Health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and as directed.

PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified and as directed.

Toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed.

PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor 110mm bore or fixed to walls.

PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor 75mm bore or fixed to walls.

Hard core of stone not exc 63 mm guage spread, levelled in layers not exc 100mm watering and well ramming to true surfaces complete all as specified and as directed.

Supply & fixing brass chromium plated soap dish fixed in repairs complete all as specified and as directed.

Supply & fixing grab bar 300 mm long towel rack fixed in repairs complete all as specified and as directed.

Supply & fixing two concealed stop cock with basin spout (composite one piece body) fixed in repairs complete all as specified and as directed.

Single lever wash basin mixture without pop up waste with 450 mm long braided hosed 15 mm dia fixed in repairs complete all as specified and as directed.

Supply & fixing Maze hand shower 95 x 95 mm square shape single flow (face plate stainless steel & ABC body in chorme finish with rubet cleaning system fixed in repairs complete all as specified and as directed.

S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

Plain cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregates as in sunken floor/ foundatiom, complete all as specified and as directed upto G+3 story bldg.

M&L for Treatment of sunken floor surfaces with 0.488 kg/Sqm first layer of slurry of cement mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer shall be allowed to be cured for 4 hours and then applying in second layer slurry of cement @ 0.242 Kg /Sqm mixed with acrylic based polymer based modified cementitious composite compound @0.126 Kg/Sqm. This layer shall be allowed to be cured for 4 hours, including taking down old/existing treatment with wire brusing and clearing the dust and foreign material before new treatment and incuding one GI light grade 450mm long 32 mm dia Spout to each sunken floor, complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and avaraging 15cm deep and getting out in soft /loose soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and 1.5m deep for foundation etc in any type of soil and getting out complete all as specified and as directed.

Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling, sub base and mass concrete complete all as specified and as directed.

Supply only integral water proofing compound as approved by GE.

M&L white washing two coats to ceiling surfaces including preparation of newly plastered untreated surfaces all as spd and directed.

M & L applying two coats of cement based paint on newly plastered orer a coat of primer unplastered wall surface including preparation of surfaces, complete all as specified.

M&L white washing two coats to wall surfaces including preparation of newly plastered untreated surfaces complete all as specified and as directed.

RCC 1:1.5:3 type A-1 using 20mm graded crushed stone aggregate as in RCC slabs shelves roof proj/drops/chajjas etc complete all as specified and as directed.

All as per serial item no 132.00 here in before but in chajjas complete all as specified and as directed.

All as per serial item no 132.00 here in before but in beams, cantilevers, coloumn, lintels over 1.50m span complete all as specified and as directed.

Providing cement concrete 1:2:4 type B-I (using 20mm graded stone aggregate as in lintels up to 1.50 mtr clean span, cills, siesmic and other similar bands, plinth courses, coping, bed plates and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

PVC (SWR) junction single or double equal or unequal 75mm bore.

All as per serial item no 136.00 here in before but 100mm bore.

PVC (SWR) vent cowl 75mm.

PVC (SWR) floor trap plain with grating including jointing with solvent 75mm dia.

PVC (SWR) multi floor trap with grating including jointing with solvent cement 75mm dia.

PVC (SWR) gully trap 125/100mm setting and jointing with solvent cement.

S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls complete all as specified and as directed.

Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen,MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness all as specified and directed and described as under :- (a) Prepartion of RCC foof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacture'"s specification complete all as specified and directed. (b) Supply & providing water proofing treatment with polymeric proofing membrane of 3 Kg/Sqm HYPERPLAS STANDARD/MULTIPLAS STANDARD consting of 100 micron HDPE film centre core including coating he surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified or as directed. (c) M & L for solar reflective bitumens aluminium paint @ 0.10 Kg per Sqm over membrance surfaces as in roof treatment complete all as specified and directed.

Taking down carefully alu./copper point wiring ,light, fan socket, or power complete with (fittings such as old rusted steel conduit switches ceiling rose pendants, regulators, socket etc to be measured separately ) removing material to store for disposal by Sch of credit and making good to disturbed surfaces of walls floors etc and all as specified.

Dismantling and taking down fluorescent tube light single/double of any wattage or size fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for reuse or taking in schedule of credit.

M&L for Point wiring using approved color coading as per IS code (Red,Black and Green for single phase circuit) with multi stranded copper condutor 1.5 Sqmm nominal cross section area,single core,PVC insulated and unsheathed FRLS cable 1100V grade,in and including medium grade,PVC concealed conduit ISI marked of dia not less than 20mm and conduilt accessories concealed in wall/roof/floor etc with terminated to new pressed flush metal box and readily available cover with outer plates and inner plates etc, suitable for mounting modular type switches , sockets, fan regulators etc PVC insulated PVC insulated multistranded copper condutor 1.5 sqmm nominal cross section area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following:- One light Point/Exhaust fan point controlled by one,one way switch.

All as per item No 146.00 here in before but 3 Pin 5 Amp modular Socket on the same board, complete all as specified.

All as per item No 146.00 here in before but 3 Pin 5 Amp modular Socket on independent board complete all as specified and directed.

All as per item No 146.00 here in before but M & L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through in and including PVC conduit size of not less than 25mm concecled in wall / surface including sutiable new annealed sunken boxes,modular frame and cover plate for fixing of modular switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and for one 5 pin modular socket outlet two in one 16/6 amps on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green and making good, disturbed surface as it is complete all as specified and directed.

Modular switch single pole one way 6 amps 240 volts with polycarbonate body complete all as specified and directed.

Modular socket 6 amps 5 pin flush type, 240 volts. with polycarbonate body. complete all as specified and directed.

Modular socket outlet , 5 pin 6amps and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.

Modular switch single pole one way 16 amps 240 volts with polycarbonate body complete all as specified and directed.

Ceiling rose, 3 phase, PVC/polycarbonate, surface type bakelite type 65x50mm three terminals complete all as specified and directed.

LED Light fitting 20 watt High-quality materials and design. Extruded aluminium housing enhances safety with High quality PC Diffusers Reliable and robust housing structure, maximize the endurance over the life time slim Integrated design, easy to install Efficacy: 110 lm/W and also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceiling complete all as specified and as directed.

LED Light fitting 10 watt mirror light, robust and high performance batten. This LED luminaire comprises of extruded channel in thermally conductive material. High translucent serrated milky white diffuseris used to get glare free and smooth light distribution. Efficacy: 110 lm/W. Also available in warm white and natural white complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting complete all as specified and as directed.

Supply & fixing in replacement of 35 Watt LED security light fitting with ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection and with 0.6 mtr long 20/25 mm (as per manufacturer standard) dia GI Pipe in 45 degree bend shape and necessary clamping devices required at site complete all as specified and as directed.

Taking down ceiling fan /exhaust fan complete ,and rehanging ceiling fan / exhaust fan and connecting up including provision of three core copper conductor cable 1.5 sqmm nominal cross sectional area and length not less than 0.5 mtr from ceiling rose to fan complete all as specified and directed. Note :- Fans shall be deposited to MES store yard.

Exhaust fans steel body, AC single phase 230 V of size 300 mm sweep and blades, frames and louvers complete all as specified and as directed.

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity , 50 litres, BEE 5 star rated complete with all accessories such as safety valve thermostate, NRV connection piece etc complete all as specified and as directed.

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity , 25 litres, BEE 5 star rated complete with all accessories such as safety valve thermostate, NRV connection piece etc complete all as specified and as directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 16 to 32 Amp , 240 Volts capacity complete all as specified and as directed.

Switch piano, flush type singlepole, one way 5 Amp, 230 Volts AC complete all as specified and as directed.

Socket outlet 3 pin, 5 A, flush type , 240 V with polycarbonate body complete all as specified and as directed.

Ceiling rose, 3 phase, PVC/polycarbonate, surface type, 65 mm x 50 mm insluated body, three terminal complete all as specified and as directed.

S&F new generation energy saving LED bulk head 9/10 watt with opal diffuser suitable for 600 lm complete all as specified and as directed.

MCB SPN 40 Amps, 240 Volts, “C” Curve complete all as specified and as directed.

MCB SP, 6 to 32 Amps, 240 Volts, rupturing capacity 10 KA “C” Series complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 5 of SSR Part-I connected to earthing test point all as specified or indicated including testing on complete all as specified and as directed.

Supply and laying or fixing or passing through existing duct/pipe, 1100 Volts grade heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed 10 Sq mm 2 core nominal cross section stranded conductor complete all as specified and as directed.

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all complete as specified and directed. NOTE : Punned down thickness of sand shall be measured only.

Supply and lay bricks, class ‘B’ covering as mechanical protection to cable with well burnt all complete as specified and directed.

Supply and lay G.I pipe Light grade with all fittings required for protection of under ground cable including cutting of road surface wherever required and making good to match with existing surface of size 40 mm dia complete as specified and directed.